Actalent
Join to apply for the
Design Engineer
role at
Actalent 1 day ago Be among the first 25 applicants Join to apply for the
Design Engineer
role at
Actalent Collaborate with sales personnel and directly with customers to design sanitary liquid processing systems tailored to project specifications, site constraints, and process goals. Attend customer meetings (virtually or on-site) to gather requirements, understand challenges, and provide technically sound recommendations. Generate and revise engineering drawings using CAD software, including process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), general arrangement (GA) layouts, and fabrication drawings. Interpret customer-provided documents (RFQs, specifications, P&IDs, process flow diagrams) to develop accurate design packages and equipment layouts. Participate in customer calls and internal project meetings to clarify technical requirements and contribute to design strategy. Perform basic engineering calculations to appropriately size tanks, pumps, valves, piping, and other equipment. Collect technical and commercial data needed to prepare accurate project costing, bill of materials (BOM), and quotes for custom systems. Present technical design proposals and cost estimates to customers alongside sales managers, promoting the value and feasibility of Deutsche’s solution. Communicate design intent, project scope, and critical considerations to the Director of Engineering for review and alignment. Upon project award, provide complete documentation to Project Coordination for job setup, equipment ordering, and installation planning. Offer technical support to inside and outside sales staff by reviewing specifications, clarifying system functionality, and refining layouts. Coordinate with production and purchasing to confirm materials, supplier options, and manufacturability for custom solutions. Support field teams during installation and commissioning phases by conducting site visits, issuing design clarifications, and resolving installation challenges. Participate in system startup and performance validation as needed, ensuring the design meets customer expectations. Provide troubleshooting support during equipment breakdowns and coordinate corrective actions with service teams. Maintain organized engineering documentation, update drawings after changes (as-built documentation), and issue change orders as needed. Mentor and support other engineering & project management staff by sharing best practices, design standards, and technical guidance.
Description
Collaborate with sales personnel and directly with customers to design sanitary liquid processing systems tailored to project specifications, site constraints, and process goals. Attend customer meetings (virtually or on-site) to gather requirements, understand challenges, and provide technically sound recommendations. Generate and revise engineering drawings using CAD software, including process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), general arrangement (GA) layouts, and fabrication drawings. Interpret customer-provided documents (RFQs, specifications, P&IDs, process flow diagrams) to develop accurate design packages and equipment layouts. Participate in customer calls and internal project meetings to clarify technical requirements and contribute to design strategy. Perform basic engineering calculations to appropriately size tanks, pumps, valves, piping, and other equipment. Collect technical and commercial data needed to prepare accurate project costing, bill of materials (BOM), and quotes for custom systems. Present technical design proposals and cost estimates to customers alongside sales managers, promoting the value and feasibility of Deutsche’s solution. Communicate design intent, project scope, and critical considerations to the Director of Engineering for review and alignment. Upon project award, provide complete documentation to Project Coordination for job setup, equipment ordering, and installation planning. Offer technical support to inside and outside sales staff by reviewing specifications, clarifying system functionality, and refining layouts. Coordinate with production and purchasing to confirm materials, supplier options, and manufacturability for custom solutions. Support field teams during installation and commissioning phases by conducting site visits, issuing design clarifications, and resolving installation challenges. Participate in system startup and performance validation as needed, ensuring the design meets customer expectations. Provide troubleshooting support during equipment breakdowns and coordinate corrective actions with service teams. Maintain organized engineering documentation, update drawings after changes (as-built documentation), and issue change orders as needed. Mentor and support other engineering & project management staff by sharing best practices, design standards, and technical guidance.
Skills
Solidworks, Autocad, mechanical design, process flow design, p&id
Top Skills Details
Solidworks,Autocad,mechanical design
Additional Skills & Qualifications
Bachelor’s degree in Mechanical Engineering, Chemical Engineering, or related technical field. 3–5 years of experience in equipment or system design for industrial process applications (preferably in food, beverage, or pharmaceutical manufacturing). Proficient in AutoCAD (2D required; 3D CAD and SolidWorks experience is a plus). Experience developing process flow diagrams (PFDs), P&IDs, general arrangement layouts, and fabrication drawings. Strong knowledge of fluid handling equipment such as tanks, pumps, valves, piping, and HXs. Comfortable performing basic engineering calculations including flow, pressure drop, and heat transfer. Ability to interpret customer specifications, RFQs, and site layouts to develop practical and efficient designs. Strong communication skills and ability to interface with sales, customers, production, and installation crews. Highly organized with a strong attention to detail and the ability to manage multiple projects simultaneously. Willingness to travel occasionally for site visits, project installation support, or system startup. Familiarity with sanitary design principles and relevant codes/standards (e.g., ASME, BPE, 3-A) is a plus.
Experience Level
Intermediate Level
Pay And Benefits
The pay range for this position is $90000.00 - $105000.00/yr.
Benefits
401(k)
Dental insurance
Health insurance
Paid time off
Workplace Type
This is a fully onsite position in Charlotte,NC.
Application Deadline
This position is anticipated to close on Jul 25, 2025.
About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. Seniority level
Seniority level Mid-Senior level Employment type
Employment type Full-time Job function
Job function Engineering and Information Technology Industries Business Consulting and Services Referrals increase your chances of interviewing at Actalent by 2x Get notified about new Design Engineer jobs in
Charlotte, NC . Mechanical Design Engineer - Entry Level
Charlotte, NC $82,000.00-$95,000.00 1 month ago Mechanical Design Engineer - Entry Level
Mechanical Project Engineer - New Product Development (NPD)
Rock Hill, SC $90,000.00-$110,000.00 3 weeks ago Manufacturing Engineer – New Product Introduction
Huntersville, NC $85,000.00-$148,700.00 8 months ago Charlotte, NC $82,000.00-$95,000.00 1 week ago Charlotte, NC $70,000.00-$90,000.00 8 hours ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr
Design Engineer
role at
Actalent 1 day ago Be among the first 25 applicants Join to apply for the
Design Engineer
role at
Actalent Collaborate with sales personnel and directly with customers to design sanitary liquid processing systems tailored to project specifications, site constraints, and process goals. Attend customer meetings (virtually or on-site) to gather requirements, understand challenges, and provide technically sound recommendations. Generate and revise engineering drawings using CAD software, including process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), general arrangement (GA) layouts, and fabrication drawings. Interpret customer-provided documents (RFQs, specifications, P&IDs, process flow diagrams) to develop accurate design packages and equipment layouts. Participate in customer calls and internal project meetings to clarify technical requirements and contribute to design strategy. Perform basic engineering calculations to appropriately size tanks, pumps, valves, piping, and other equipment. Collect technical and commercial data needed to prepare accurate project costing, bill of materials (BOM), and quotes for custom systems. Present technical design proposals and cost estimates to customers alongside sales managers, promoting the value and feasibility of Deutsche’s solution. Communicate design intent, project scope, and critical considerations to the Director of Engineering for review and alignment. Upon project award, provide complete documentation to Project Coordination for job setup, equipment ordering, and installation planning. Offer technical support to inside and outside sales staff by reviewing specifications, clarifying system functionality, and refining layouts. Coordinate with production and purchasing to confirm materials, supplier options, and manufacturability for custom solutions. Support field teams during installation and commissioning phases by conducting site visits, issuing design clarifications, and resolving installation challenges. Participate in system startup and performance validation as needed, ensuring the design meets customer expectations. Provide troubleshooting support during equipment breakdowns and coordinate corrective actions with service teams. Maintain organized engineering documentation, update drawings after changes (as-built documentation), and issue change orders as needed. Mentor and support other engineering & project management staff by sharing best practices, design standards, and technical guidance.
Description
Collaborate with sales personnel and directly with customers to design sanitary liquid processing systems tailored to project specifications, site constraints, and process goals. Attend customer meetings (virtually or on-site) to gather requirements, understand challenges, and provide technically sound recommendations. Generate and revise engineering drawings using CAD software, including process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), general arrangement (GA) layouts, and fabrication drawings. Interpret customer-provided documents (RFQs, specifications, P&IDs, process flow diagrams) to develop accurate design packages and equipment layouts. Participate in customer calls and internal project meetings to clarify technical requirements and contribute to design strategy. Perform basic engineering calculations to appropriately size tanks, pumps, valves, piping, and other equipment. Collect technical and commercial data needed to prepare accurate project costing, bill of materials (BOM), and quotes for custom systems. Present technical design proposals and cost estimates to customers alongside sales managers, promoting the value and feasibility of Deutsche’s solution. Communicate design intent, project scope, and critical considerations to the Director of Engineering for review and alignment. Upon project award, provide complete documentation to Project Coordination for job setup, equipment ordering, and installation planning. Offer technical support to inside and outside sales staff by reviewing specifications, clarifying system functionality, and refining layouts. Coordinate with production and purchasing to confirm materials, supplier options, and manufacturability for custom solutions. Support field teams during installation and commissioning phases by conducting site visits, issuing design clarifications, and resolving installation challenges. Participate in system startup and performance validation as needed, ensuring the design meets customer expectations. Provide troubleshooting support during equipment breakdowns and coordinate corrective actions with service teams. Maintain organized engineering documentation, update drawings after changes (as-built documentation), and issue change orders as needed. Mentor and support other engineering & project management staff by sharing best practices, design standards, and technical guidance.
Skills
Solidworks, Autocad, mechanical design, process flow design, p&id
Top Skills Details
Solidworks,Autocad,mechanical design
Additional Skills & Qualifications
Bachelor’s degree in Mechanical Engineering, Chemical Engineering, or related technical field. 3–5 years of experience in equipment or system design for industrial process applications (preferably in food, beverage, or pharmaceutical manufacturing). Proficient in AutoCAD (2D required; 3D CAD and SolidWorks experience is a plus). Experience developing process flow diagrams (PFDs), P&IDs, general arrangement layouts, and fabrication drawings. Strong knowledge of fluid handling equipment such as tanks, pumps, valves, piping, and HXs. Comfortable performing basic engineering calculations including flow, pressure drop, and heat transfer. Ability to interpret customer specifications, RFQs, and site layouts to develop practical and efficient designs. Strong communication skills and ability to interface with sales, customers, production, and installation crews. Highly organized with a strong attention to detail and the ability to manage multiple projects simultaneously. Willingness to travel occasionally for site visits, project installation support, or system startup. Familiarity with sanitary design principles and relevant codes/standards (e.g., ASME, BPE, 3-A) is a plus.
Experience Level
Intermediate Level
Pay And Benefits
The pay range for this position is $90000.00 - $105000.00/yr.
Benefits
401(k)
Dental insurance
Health insurance
Paid time off
Workplace Type
This is a fully onsite position in Charlotte,NC.
Application Deadline
This position is anticipated to close on Jul 25, 2025.
About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. Seniority level
Seniority level Mid-Senior level Employment type
Employment type Full-time Job function
Job function Engineering and Information Technology Industries Business Consulting and Services Referrals increase your chances of interviewing at Actalent by 2x Get notified about new Design Engineer jobs in
Charlotte, NC . Mechanical Design Engineer - Entry Level
Charlotte, NC $82,000.00-$95,000.00 1 month ago Mechanical Design Engineer - Entry Level
Mechanical Project Engineer - New Product Development (NPD)
Rock Hill, SC $90,000.00-$110,000.00 3 weeks ago Manufacturing Engineer – New Product Introduction
Huntersville, NC $85,000.00-$148,700.00 8 months ago Charlotte, NC $82,000.00-$95,000.00 1 week ago Charlotte, NC $70,000.00-$90,000.00 8 hours ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr