TEKsystems
Summary
We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. If you have someone in mind that you would want to travel with, we would consider them as well.
Responsibilities
Pull and terminate low voltage cable.
Installing network equipment within commercial settings.
Follow instructions and code when pulling cable.
Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work.
Ensuring all cables are neatly tied and bundled according to safety regulations.
Installing of cable support structures such as j-hooks, cable racks, and inner duct.
Conduct tests to ensure all newly installed cable systems and component devices are operational.
Troubleshoot issues with the cable network.
Perform any other duties not specifically stated herein, but which your supervisor may assign.
Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA.
Operate a scissor lift and work at heights as required.
Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots.
Skills & Qualifications
Low voltage, installation, WAP, CCTV, cable, cat5, cat6, cabling, cable installation, cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting.
Experience as a Data Cable Technician.
Available for extensive travel nationwide.
Ability to prioritize tasks.
Able to lift and carry 50 pounds or more multiple times per shift.
Ability to work in cramped spaces.
Hours of project: 7 pm - 7 am, 5 days a week.
Ability and willingness to travel to Lowell, AR for new hire orientation.
100% travel of the USA.
Valid driver\'s license with a clean driving record; no DUI or DWI in the last three years.
Tools expected: hand tools, screwdrivers (standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers.
Benefits & Pay
Pay range: $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms.
Per-Diem paid $125/day for food and lodging (or lodging can be prepaid; if so, per diem is $45/day to cover food).
Company vehicle provided (traveling with a partner).
Medical, dental & vision; critical illness, accident, and hospital coverage;
401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available;
Life Insurance (Voluntary Life & AD&D for employee and dependents); short and long-term disability;
Health Savings Account (HSA); transportation benefits; Employee Assistance Program;
Time Off/Leave (PTO, Vacation or Sick Leave).
Work Location & Timing This is a fully onsite position in Dallas, TX. The position is anticipated to close on Sep 12, 2025.
About TEKsystems We\'re partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. TEKsystems is an Allegis Group company.
EEO Statement The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Application We are directing you to the original job posting. Please apply directly for this job at the employer’s website.
#J-18808-Ljbffr
We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. If you have someone in mind that you would want to travel with, we would consider them as well.
Responsibilities
Pull and terminate low voltage cable.
Installing network equipment within commercial settings.
Follow instructions and code when pulling cable.
Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work.
Ensuring all cables are neatly tied and bundled according to safety regulations.
Installing of cable support structures such as j-hooks, cable racks, and inner duct.
Conduct tests to ensure all newly installed cable systems and component devices are operational.
Troubleshoot issues with the cable network.
Perform any other duties not specifically stated herein, but which your supervisor may assign.
Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA.
Operate a scissor lift and work at heights as required.
Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots.
Skills & Qualifications
Low voltage, installation, WAP, CCTV, cable, cat5, cat6, cabling, cable installation, cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting.
Experience as a Data Cable Technician.
Available for extensive travel nationwide.
Ability to prioritize tasks.
Able to lift and carry 50 pounds or more multiple times per shift.
Ability to work in cramped spaces.
Hours of project: 7 pm - 7 am, 5 days a week.
Ability and willingness to travel to Lowell, AR for new hire orientation.
100% travel of the USA.
Valid driver\'s license with a clean driving record; no DUI or DWI in the last three years.
Tools expected: hand tools, screwdrivers (standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers.
Benefits & Pay
Pay range: $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms.
Per-Diem paid $125/day for food and lodging (or lodging can be prepaid; if so, per diem is $45/day to cover food).
Company vehicle provided (traveling with a partner).
Medical, dental & vision; critical illness, accident, and hospital coverage;
401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available;
Life Insurance (Voluntary Life & AD&D for employee and dependents); short and long-term disability;
Health Savings Account (HSA); transportation benefits; Employee Assistance Program;
Time Off/Leave (PTO, Vacation or Sick Leave).
Work Location & Timing This is a fully onsite position in Dallas, TX. The position is anticipated to close on Sep 12, 2025.
About TEKsystems We\'re partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. TEKsystems is an Allegis Group company.
EEO Statement The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Application We are directing you to the original job posting. Please apply directly for this job at the employer’s website.
#J-18808-Ljbffr