Plymouth Foam, An ALTOR company
Electro‑Mechanical Maintenance Specialist
Plymouth Foam, An ALTOR company, Oklahoma City, Oklahoma, United States
Electro‑Mechanical Maintenance Specialist
3 days ago Be among the first 25 applicants
Plymouth Foam, An ALTOR company provided pay range This range is provided by Plymouth Foam, An ALTOR company. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more.
Base pay range $25.00/hr - $36.00/hr
Department:
Maintenance Reports to:
Maintenance Supervisor
Ready for the challenge? Can you walk up to a downed line, read the clues, and bring it back to life? If root‑cause analysis, precise repairs, and proactive care are your signature moves, this role puts your skills front and center across hydraulic, pneumatic, mechanical, electronic, and basic electrical systems.
Responsibilities
Production assets run reliably because you execute preventive and predictive maintenance with discipline.
Troubleshooting is swift and systematic—schematics in hand, issues isolated, and fixes applied.
Forklifts, compressors, driers, vacuum pumps, and low‑pressure boilers get serviced on schedule.
Mold changes are smooth: you set up, remove, and store tooling per documented procedures.
Fill guns and ejectors are bench‑tested, cleaned, rebuilt, and inspected for consistent performance.
Facility basics are covered—minor electrical (bulbs/fuses), light carpentry/repair, and small plumbing fixture swaps.
Surfaces are protected and presentable with paint, varnish, or stain when needed.
Water treatment checks (hardness, pH, etc.) are completed and reported accurately.
Job specs and task lists are followed, with all paperwork completed thoroughly.
Safety leads every step: lockout/tagout, correct PPE, and tidy work areas.
Other duties as assigned keep the operation moving.
Qualifications
HS diploma or GED; a two‑year degree or technical certificate is preferred.
About three years of relevant maintenance experience; you can handle standard repairs independently.
Comfortable reading schematics to troubleshoot hydraulic, pneumatic, and electrical issues.
Experience using MRP/ERP systems for work orders and documentation.
Hands‑on time with low‑pressure boilers, air compressors, air driers, and vacuum pumps.
Forklift maintenance experience.
Willing and able to work assigned shifts, put in overtime, and attend after‑hours meetings as needed.
You’re a self‑starter with strong time management and a commitment to Altor Solutions’ safety and conduct standards.
FLSA Status:
Hourly Non‑exempt
Tools
We provide the tools required to perform all job duties. You may use personal tools if they are reviewed and approved by plant management.
Physical demands
You can frequently lift and carry up to 45 pounds and maintain close vision. Expect regular sitting, hand use, and talking/hearing; frequent standing and walking; reaching; and stooping/crouching, bending, or twisting. At times, you’ll push, pull, or move materials and work in awkward positions, including under equipment or near operating machinery.
Work Environment
The work environment is typical of most manufacturing environments. The noise level in the work environment is usually high with ear protection required as posted. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.
This document in no way states or implies that these are the only responsibilities of, and the duties to be performed by, the associate occupying this position. The Company reserves the right to change, modify, amend, add to or delete from, any section of this document as it deems, in its judgment, to be proper.
Seniority level Mid‑Senior level
Employment type Full‑time
Job function Management and Manufacturing
Industries
Plastics Manufacturing
Referrals increase your chances of interviewing at Plymouth Foam, An ALTOR company by 2x Sign in to set job alerts for “Mechanical Specialist” roles. Bedford, MA $80,000.00-$90,000.00 1 week ago
Waltham, MA $140,000.00-$170,000.00 3 days ago
Andover, MA $112,000.00-$125,000.00 3 days ago
Somerville, MA $84,540.00-$110,400.00 1 day ago
Billerica, MA $110,000.00-$125,000.00 4 days ago
Burlington, MA $50,000.00-$100,000.00 1 week ago
Lexington, MA $90,000.00-$150,000.00 2 months ago
Mechanical engineer at an energy startup -- systems and integration Billerica, MA $110,000.00-$125,000.00 4 days ago
Andover, MA $85,000.00-$110,000.00 2 weeks ago
Boston, MA $95,000.00-$125,000.00 1 month ago
Woburn, MA $100,000.00-$120,000.00 1 week ago
Cambridge, MA $90,000.00-$150,000.00 2 weeks ago
Boston, MA $135,000.00-$170,000.00 3 days ago
Newton, MA $90,000.00-$150,000.00 2 weeks ago
Mechanical Engineer I (New Grad, Summer 2026) Littleton, MA $68,400.00-$94,100.00 2 weeks ago
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr
Plymouth Foam, An ALTOR company provided pay range This range is provided by Plymouth Foam, An ALTOR company. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more.
Base pay range $25.00/hr - $36.00/hr
Department:
Maintenance Reports to:
Maintenance Supervisor
Ready for the challenge? Can you walk up to a downed line, read the clues, and bring it back to life? If root‑cause analysis, precise repairs, and proactive care are your signature moves, this role puts your skills front and center across hydraulic, pneumatic, mechanical, electronic, and basic electrical systems.
Responsibilities
Production assets run reliably because you execute preventive and predictive maintenance with discipline.
Troubleshooting is swift and systematic—schematics in hand, issues isolated, and fixes applied.
Forklifts, compressors, driers, vacuum pumps, and low‑pressure boilers get serviced on schedule.
Mold changes are smooth: you set up, remove, and store tooling per documented procedures.
Fill guns and ejectors are bench‑tested, cleaned, rebuilt, and inspected for consistent performance.
Facility basics are covered—minor electrical (bulbs/fuses), light carpentry/repair, and small plumbing fixture swaps.
Surfaces are protected and presentable with paint, varnish, or stain when needed.
Water treatment checks (hardness, pH, etc.) are completed and reported accurately.
Job specs and task lists are followed, with all paperwork completed thoroughly.
Safety leads every step: lockout/tagout, correct PPE, and tidy work areas.
Other duties as assigned keep the operation moving.
Qualifications
HS diploma or GED; a two‑year degree or technical certificate is preferred.
About three years of relevant maintenance experience; you can handle standard repairs independently.
Comfortable reading schematics to troubleshoot hydraulic, pneumatic, and electrical issues.
Experience using MRP/ERP systems for work orders and documentation.
Hands‑on time with low‑pressure boilers, air compressors, air driers, and vacuum pumps.
Forklift maintenance experience.
Willing and able to work assigned shifts, put in overtime, and attend after‑hours meetings as needed.
You’re a self‑starter with strong time management and a commitment to Altor Solutions’ safety and conduct standards.
FLSA Status:
Hourly Non‑exempt
Tools
We provide the tools required to perform all job duties. You may use personal tools if they are reviewed and approved by plant management.
Physical demands
You can frequently lift and carry up to 45 pounds and maintain close vision. Expect regular sitting, hand use, and talking/hearing; frequent standing and walking; reaching; and stooping/crouching, bending, or twisting. At times, you’ll push, pull, or move materials and work in awkward positions, including under equipment or near operating machinery.
Work Environment
The work environment is typical of most manufacturing environments. The noise level in the work environment is usually high with ear protection required as posted. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.
This document in no way states or implies that these are the only responsibilities of, and the duties to be performed by, the associate occupying this position. The Company reserves the right to change, modify, amend, add to or delete from, any section of this document as it deems, in its judgment, to be proper.
Seniority level Mid‑Senior level
Employment type Full‑time
Job function Management and Manufacturing
Industries
Plastics Manufacturing
Referrals increase your chances of interviewing at Plymouth Foam, An ALTOR company by 2x Sign in to set job alerts for “Mechanical Specialist” roles. Bedford, MA $80,000.00-$90,000.00 1 week ago
Waltham, MA $140,000.00-$170,000.00 3 days ago
Andover, MA $112,000.00-$125,000.00 3 days ago
Somerville, MA $84,540.00-$110,400.00 1 day ago
Billerica, MA $110,000.00-$125,000.00 4 days ago
Burlington, MA $50,000.00-$100,000.00 1 week ago
Lexington, MA $90,000.00-$150,000.00 2 months ago
Mechanical engineer at an energy startup -- systems and integration Billerica, MA $110,000.00-$125,000.00 4 days ago
Andover, MA $85,000.00-$110,000.00 2 weeks ago
Boston, MA $95,000.00-$125,000.00 1 month ago
Woburn, MA $100,000.00-$120,000.00 1 week ago
Cambridge, MA $90,000.00-$150,000.00 2 weeks ago
Boston, MA $135,000.00-$170,000.00 3 days ago
Newton, MA $90,000.00-$150,000.00 2 weeks ago
Mechanical Engineer I (New Grad, Summer 2026) Littleton, MA $68,400.00-$94,100.00 2 weeks ago
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr