Watson Electrical Construction Co. LLC
Commercial Electrician
Watson Electrical Construction Co. LLC, Raleigh, North Carolina, United States, 27601
Commercial Electrician – Watson Electrical Construction Co. LLC
Role Summary:
Electrician II or Level 2 Electrical Mechanic with minimum 5 years electrical experience in commercial/industrial construction. Responsible for installation, alteration, addition and repair of electrical systems, equipment and associated materials.
Key Skills:
Basic math, dependable transportation, daily commute within 50‑mile radius, effective communication, EMT & GRC conduit installation, MC cable experience, switch gear, panel installation and termination.
Mandatory Hiring Requirements:
Resume, references, background check, drug screen, valid state driver’s license. Journeyman license preferred but not required.
Responsibilities
Direct and work with an Electrician Helper as directed by Supervisor.
Accurately install conduit, wire, pre‑fab assemblies, panel boards, light fixtures, devices and other equipment per layout.
Minimize waste of materials, assure quality of the installation (no re‑dos) and be consistent with layout of task(s).
Follow diagrams and blueprints to ensure concealed wiring is installed before completion of future walls, ceilings and flooring.
Measure, cut, thread, ream, assemble and install conduit using hacksaw, pipe threader and conduit bender(s).
Pull and splice wires, strip insulation, twist together, apply terminal connectors and/or tape.
Connect wiring to light fixtures, power equipment, motors, devices and other electrical apparatus using hand tools and power tools.
Test continuity of circuits and wiring to insure compatibility and safety of components using test instruments.
Observe functions of installed equipment or system to determine hazards and need for adjustments, relocation or replacement.
May repair faulty equipment or systems.
Complete required paperwork.
Monitor safety per Watson Safety Program.
Demonstrate knowledge of all tools and equipment.
Demonstrate efficient knowledge of trade.
Coordinate installation with other trades.
Responsible for getting materials and proper tools to complete assigned task.
Assist Supervisor or designated person to troubleshoot electrical branch circuits and feeders.
Position Requirements
High School Graduate or GED.
Minimum 5‑year electrical experience required.
Current state driver’s license preferred.
Applicable federal, state, and local certifications as required.
Working Conditions
Work in all elements, location, time of year, heat, cold, rain or snow.
Must be able to utilize construction site sanitary facilities.
Job requires employee to have required personal tools with him at all times.
Work from all types of ladders and be able to transport/relocate ladders unassisted.
Perform work at various heights, up to 90” from ladders, scaffolds, aerial lifts, etc.
Work in restricted areas (switch gear‑room, manholes, utility tunnels and crawl spaces).
Wear personal protective equipment as required.
Able to work 40 hours per week plus overtime as required, to include night shifts and out‑of‑town work if required.
Skills
Identify colors of wire and other items.
Read blueprints and schematics.
Bend conduit by hand with hand benders.
Use power tools safely.
Operate trenchers, lift trucks, aerial lifts.
Dig trenches using hand tools or power equipment.
Practice safe work procedures.
Operate two‑handed tools.
Operate company truck with manual and automatic transmission.
Read and interpret maps, instruction manuals, written orders.
Operate and work from mechanical personal lifts.
Assist Supervisor or designated person with energized circuits and equipment.
Effectively supervise electrical helpers to complete tasks assigned by a Supervisor safely and accurately.
Physical Function
Must hear and see well.
Bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead.
Able to lift objects up to 100 pounds, frequent lifting and carrying of objects up to 50 pounds.
Tolerant to prolonged standing and movement on foot.
Climb ladders (all types).
Complete overhead work for extended periods of time.
Responsible for securing tools and materials from storage areas to complete assigned tasks.
Repetitive use of arms, hands, and fingers.
Watson Electrical Construction Company LLC is an Equal Opportunity Employer.
#J-18808-Ljbffr
Electrician II or Level 2 Electrical Mechanic with minimum 5 years electrical experience in commercial/industrial construction. Responsible for installation, alteration, addition and repair of electrical systems, equipment and associated materials.
Key Skills:
Basic math, dependable transportation, daily commute within 50‑mile radius, effective communication, EMT & GRC conduit installation, MC cable experience, switch gear, panel installation and termination.
Mandatory Hiring Requirements:
Resume, references, background check, drug screen, valid state driver’s license. Journeyman license preferred but not required.
Responsibilities
Direct and work with an Electrician Helper as directed by Supervisor.
Accurately install conduit, wire, pre‑fab assemblies, panel boards, light fixtures, devices and other equipment per layout.
Minimize waste of materials, assure quality of the installation (no re‑dos) and be consistent with layout of task(s).
Follow diagrams and blueprints to ensure concealed wiring is installed before completion of future walls, ceilings and flooring.
Measure, cut, thread, ream, assemble and install conduit using hacksaw, pipe threader and conduit bender(s).
Pull and splice wires, strip insulation, twist together, apply terminal connectors and/or tape.
Connect wiring to light fixtures, power equipment, motors, devices and other electrical apparatus using hand tools and power tools.
Test continuity of circuits and wiring to insure compatibility and safety of components using test instruments.
Observe functions of installed equipment or system to determine hazards and need for adjustments, relocation or replacement.
May repair faulty equipment or systems.
Complete required paperwork.
Monitor safety per Watson Safety Program.
Demonstrate knowledge of all tools and equipment.
Demonstrate efficient knowledge of trade.
Coordinate installation with other trades.
Responsible for getting materials and proper tools to complete assigned task.
Assist Supervisor or designated person to troubleshoot electrical branch circuits and feeders.
Position Requirements
High School Graduate or GED.
Minimum 5‑year electrical experience required.
Current state driver’s license preferred.
Applicable federal, state, and local certifications as required.
Working Conditions
Work in all elements, location, time of year, heat, cold, rain or snow.
Must be able to utilize construction site sanitary facilities.
Job requires employee to have required personal tools with him at all times.
Work from all types of ladders and be able to transport/relocate ladders unassisted.
Perform work at various heights, up to 90” from ladders, scaffolds, aerial lifts, etc.
Work in restricted areas (switch gear‑room, manholes, utility tunnels and crawl spaces).
Wear personal protective equipment as required.
Able to work 40 hours per week plus overtime as required, to include night shifts and out‑of‑town work if required.
Skills
Identify colors of wire and other items.
Read blueprints and schematics.
Bend conduit by hand with hand benders.
Use power tools safely.
Operate trenchers, lift trucks, aerial lifts.
Dig trenches using hand tools or power equipment.
Practice safe work procedures.
Operate two‑handed tools.
Operate company truck with manual and automatic transmission.
Read and interpret maps, instruction manuals, written orders.
Operate and work from mechanical personal lifts.
Assist Supervisor or designated person with energized circuits and equipment.
Effectively supervise electrical helpers to complete tasks assigned by a Supervisor safely and accurately.
Physical Function
Must hear and see well.
Bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead.
Able to lift objects up to 100 pounds, frequent lifting and carrying of objects up to 50 pounds.
Tolerant to prolonged standing and movement on foot.
Climb ladders (all types).
Complete overhead work for extended periods of time.
Responsible for securing tools and materials from storage areas to complete assigned tasks.
Repetitive use of arms, hands, and fingers.
Watson Electrical Construction Company LLC is an Equal Opportunity Employer.
#J-18808-Ljbffr