Thompson Construction Group, Inc.
Electrician (Industrial)
Thompson Construction Group, Inc., Radford, Virginia, United States, 24141
Overview
Plan the layout, install and repair wiring, electrical fixtures, apparatus and control equipment according to customer specifications and blueprints by performing the following duties in a safe and timely manner.
Job Responsibilities
Plan installations to minimize waste, provide future access and avoid unsightly, hazardous and unreliable wiring consistent with code.
Follow blueprints ensuring that wiring is installed before walls, ceilings or floors are completed.
Measure, cut, bend, thread and assemble conduit using hacksaw, pipe threader and conduit bender assisted by Electrician Helper.
Pull wiring through conduit, splices wire by stripping leads of insulation then twisting or soldering wires together and applying tape or terminal caps.
Connect wiring to lighting, power equipment, switch boxes, relays and breaker panels.
Connect power cables to electric motors or pumps and installs grounding leads.
Install control and distribute apparatus, such as switches, relays, and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools.
Connect power cables to equipment, such as electric range or motor, and install grounding leads.
Test continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeter, battery and buzzer, and oscilloscope.
Observe functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.
Other duties as assigned.
Minimum Required Tool List:
1 each Multi-Voltage Tester
1 each 9” Side Cutters
2 each 440 Channel Locks
1 set 5/16” to ½” Nut Drivers
1 set 3/8” to 3/4" Open End Wrenches
1 each #14 thru #10 Lug Crimp Tool (T&B)
1 each Needle Nose Pliers
1 each Tool Box or Bag w/lock
1 each Hack Saw and Blade
1 set Allen Wrenches
1 set Flat Head Screw Drivers (assorted sizes)
1 each Large Phillip Head Screw Driver
1 each Small Phillip Head Screw Driver
1 set 3/8” to 3/4” Drive Sockets w/ratchet
1 each 9” Level
1 each 8” and 10” Crescent Wrenches
1 pair Leather Gloves
1 each 25’ Tape Measure
1 each Center Punch
1 each Hammer
1 each Working Flash Light
1 each Tri-Square or Speed Square
1 each Pad and Pencil
1 each Wire Stripper
1 each Diagonal Cutters
Job Qualifications
Must be at least 18 years of age.
Must have completed Construction Electrician Course at a technical or trade school with at least 1 year of experience in the field or a minimum of 3 years of experience working as Electrician Helper in the field.
In some cases, the Electrician may be required to have state or local certifications.
Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor and welder.
Utilize basic math and calculator, read tape measure and understand operation and usage of volt meter/multimeter.
Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments.
Candidate may be required to pass a drug test and criminal background check based on job location/requirements.
Benefits
We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Seniority level
Entry level
Employment type
Full-time
Job function
Management and Manufacturing
Industries
Construction
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr
Job Responsibilities
Plan installations to minimize waste, provide future access and avoid unsightly, hazardous and unreliable wiring consistent with code.
Follow blueprints ensuring that wiring is installed before walls, ceilings or floors are completed.
Measure, cut, bend, thread and assemble conduit using hacksaw, pipe threader and conduit bender assisted by Electrician Helper.
Pull wiring through conduit, splices wire by stripping leads of insulation then twisting or soldering wires together and applying tape or terminal caps.
Connect wiring to lighting, power equipment, switch boxes, relays and breaker panels.
Connect power cables to electric motors or pumps and installs grounding leads.
Install control and distribute apparatus, such as switches, relays, and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools.
Connect power cables to equipment, such as electric range or motor, and install grounding leads.
Test continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeter, battery and buzzer, and oscilloscope.
Observe functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.
Other duties as assigned.
Minimum Required Tool List:
1 each Multi-Voltage Tester
1 each 9” Side Cutters
2 each 440 Channel Locks
1 set 5/16” to ½” Nut Drivers
1 set 3/8” to 3/4" Open End Wrenches
1 each #14 thru #10 Lug Crimp Tool (T&B)
1 each Needle Nose Pliers
1 each Tool Box or Bag w/lock
1 each Hack Saw and Blade
1 set Allen Wrenches
1 set Flat Head Screw Drivers (assorted sizes)
1 each Large Phillip Head Screw Driver
1 each Small Phillip Head Screw Driver
1 set 3/8” to 3/4” Drive Sockets w/ratchet
1 each 9” Level
1 each 8” and 10” Crescent Wrenches
1 pair Leather Gloves
1 each 25’ Tape Measure
1 each Center Punch
1 each Hammer
1 each Working Flash Light
1 each Tri-Square or Speed Square
1 each Pad and Pencil
1 each Wire Stripper
1 each Diagonal Cutters
Job Qualifications
Must be at least 18 years of age.
Must have completed Construction Electrician Course at a technical or trade school with at least 1 year of experience in the field or a minimum of 3 years of experience working as Electrician Helper in the field.
In some cases, the Electrician may be required to have state or local certifications.
Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor and welder.
Utilize basic math and calculator, read tape measure and understand operation and usage of volt meter/multimeter.
Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments.
Candidate may be required to pass a drug test and criminal background check based on job location/requirements.
Benefits
We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Seniority level
Entry level
Employment type
Full-time
Job function
Management and Manufacturing
Industries
Construction
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr