Vestas
Overview
At Vestas, we're committed to transforming the global energy landscape through sustainable solutions. As the world's largest wind turbine manufacturer, we've installed over 177 GW of wind power across 88 countries, solidifying our leadership in renewable energy.
Our Windsor Factory, located on 161 acres, is a key part of our manufacturing operations in North America. The Blades Factory in Windsor covers 666,000 square feet and manufactures blades for the V163-4.5 MW turbine and the 2 MW platform. With over 1,300 employees on site, our Windsor Factory plays a vital role in our operations.
We invite you to join us in our mission to power a brighter, cleaner world.
About the Role As a Technical Support Production Engineer within the Technical Support Department, you are responsible for maintaining the stability and performance of the carbon composite turbine production systems. Each Technical Support Engineer monitors systems, responds to incidents, troubleshoots issues, and ensures that production is restored quickly if/when problems occur.
Responsibilities
Analyze existing manufacturing processes, identify production efficiencies
Conceive, design, develop, and test innovative solutions based on analysis and organizational objectives
Design methods and collaborates on ideas for maintaining or increasing production capacity while improving safety, quality, and production costs
Work closely with Production staff to meet production plan
Identify process problems that reduce downtime and conserve maintenance costs
Analyze process failure modes and conduct root cause analysis to implement corrective actions (short- and long-term) to reduce cost of poor quality and cycle time
Monitor process equipment to identify potential failure modes and develop solutions to eliminate recurrence
Develop, create, and maintain documentation for manufacturing processes (flow charts, capacity/utilization studies, procedures, process work instructions, tests)
Follow and maintain organizational documentation systems and standards
Develop and update process procedures to ensure documentation accuracy and understandability
Collaborate with cross-functional teams to gain insights and direction
Interface with all levels of management and employees to gather information and provide guidance for implementation
Provide extensive support during introduction of new equipment, products, materials, and technology
Initiate, lead, and participate in improvement projects and capacity expansion/conversions
Review and create investment requests regarding the purchasing of new equipment/materials
Coordinate equipment maintenance and improvements
Provide front-line support for programming and troubleshooting robotic and automated equipment/machines
Identify PTS (Process Technical Specifications) or instructions when buying new equipment
Interpret Drawings, PII (Process Inspection Instructions) and PWI (Process Work Instructions)
Support control and audit of BOM (Bill of Materials)
Manage and conduct employee training for productivity improvement projects, and mentor fellow engineers and technicians
And all other duties as assigned
Competencies
Demonstrated teamwork skills
High degree of flexibility
A keen interest in developing new skills and understanding
Commitment to high standards and team engagement
Personal desire/value to produce quality work
Ability/desire to work as craftsman with hand tools
Problem solver oriented
Good communication skills
Effective leadership skills
Offers direction for their team and tasks
Customer focused
Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Bachelor’s degree in engineering (Mechanical or Manufacturing/Industrial with a broad understanding of Electrical and Chemical preferred)
5+ years related experience and/or training; or equivalent combination of education and experience
Proficiency in multiple types of controls, tooling geometry, machine tool processes, and fixture design
Experience with lean manufacturing, process optimization, and continuous improvement methodologies
Knowledge and experience in the application of quality, health, safety, and environmental management systems
Skills
Experience with PTC Creo, SolidWorks, and AutoCAD
Knowledge of APQP and PPAP
Knowledge and experience in FAT/SAT
PLC (programmable logic controller)
Composite manufacturing experience
Knowledge and experience in using EAM systems
Knowledge and experience in SAP software
What We Offer Join the world’s largest wind turbine manufacturer and be part of a global team focused on sustainable energy. At Vestas, we value initiative, collaboration, and accountability in a supportive environment focused on safety, sustainability, and career growth. Work alongside motivated colleagues focusing on skill development.
One of the most comprehensive benefits plans in the industry
Comprehensive medical, dental, and vision coverage available
Generous Paid Time Off & Parental Leave
401(k) plan (with employer match)
Tuition assistance
Salary offered: $85,000-120,000
DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future.
About Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We are specialized in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore.
Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field.
With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future.
Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity.
To learn more about our company and life at Vestas, we invite you to visit our website at www.vestas.com and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings.
#J-18808-Ljbffr
Our Windsor Factory, located on 161 acres, is a key part of our manufacturing operations in North America. The Blades Factory in Windsor covers 666,000 square feet and manufactures blades for the V163-4.5 MW turbine and the 2 MW platform. With over 1,300 employees on site, our Windsor Factory plays a vital role in our operations.
We invite you to join us in our mission to power a brighter, cleaner world.
About the Role As a Technical Support Production Engineer within the Technical Support Department, you are responsible for maintaining the stability and performance of the carbon composite turbine production systems. Each Technical Support Engineer monitors systems, responds to incidents, troubleshoots issues, and ensures that production is restored quickly if/when problems occur.
Responsibilities
Analyze existing manufacturing processes, identify production efficiencies
Conceive, design, develop, and test innovative solutions based on analysis and organizational objectives
Design methods and collaborates on ideas for maintaining or increasing production capacity while improving safety, quality, and production costs
Work closely with Production staff to meet production plan
Identify process problems that reduce downtime and conserve maintenance costs
Analyze process failure modes and conduct root cause analysis to implement corrective actions (short- and long-term) to reduce cost of poor quality and cycle time
Monitor process equipment to identify potential failure modes and develop solutions to eliminate recurrence
Develop, create, and maintain documentation for manufacturing processes (flow charts, capacity/utilization studies, procedures, process work instructions, tests)
Follow and maintain organizational documentation systems and standards
Develop and update process procedures to ensure documentation accuracy and understandability
Collaborate with cross-functional teams to gain insights and direction
Interface with all levels of management and employees to gather information and provide guidance for implementation
Provide extensive support during introduction of new equipment, products, materials, and technology
Initiate, lead, and participate in improvement projects and capacity expansion/conversions
Review and create investment requests regarding the purchasing of new equipment/materials
Coordinate equipment maintenance and improvements
Provide front-line support for programming and troubleshooting robotic and automated equipment/machines
Identify PTS (Process Technical Specifications) or instructions when buying new equipment
Interpret Drawings, PII (Process Inspection Instructions) and PWI (Process Work Instructions)
Support control and audit of BOM (Bill of Materials)
Manage and conduct employee training for productivity improvement projects, and mentor fellow engineers and technicians
And all other duties as assigned
Competencies
Demonstrated teamwork skills
High degree of flexibility
A keen interest in developing new skills and understanding
Commitment to high standards and team engagement
Personal desire/value to produce quality work
Ability/desire to work as craftsman with hand tools
Problem solver oriented
Good communication skills
Effective leadership skills
Offers direction for their team and tasks
Customer focused
Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Bachelor’s degree in engineering (Mechanical or Manufacturing/Industrial with a broad understanding of Electrical and Chemical preferred)
5+ years related experience and/or training; or equivalent combination of education and experience
Proficiency in multiple types of controls, tooling geometry, machine tool processes, and fixture design
Experience with lean manufacturing, process optimization, and continuous improvement methodologies
Knowledge and experience in the application of quality, health, safety, and environmental management systems
Skills
Experience with PTC Creo, SolidWorks, and AutoCAD
Knowledge of APQP and PPAP
Knowledge and experience in FAT/SAT
PLC (programmable logic controller)
Composite manufacturing experience
Knowledge and experience in using EAM systems
Knowledge and experience in SAP software
What We Offer Join the world’s largest wind turbine manufacturer and be part of a global team focused on sustainable energy. At Vestas, we value initiative, collaboration, and accountability in a supportive environment focused on safety, sustainability, and career growth. Work alongside motivated colleagues focusing on skill development.
One of the most comprehensive benefits plans in the industry
Comprehensive medical, dental, and vision coverage available
Generous Paid Time Off & Parental Leave
401(k) plan (with employer match)
Tuition assistance
Salary offered: $85,000-120,000
DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future.
About Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We are specialized in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore.
Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field.
With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future.
Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity.
To learn more about our company and life at Vestas, we invite you to visit our website at www.vestas.com and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings.
#J-18808-Ljbffr