Vestas
Technical Support Engineer (Windsor, CO, US)
At Vestas, we’re committed to transforming the global energy landscape through sustainable solutions. As the world’s largest wind turbine manufacturer, we’ve installed over 177 GW of wind power across 88 countries, solidifying our leadership in renewable energy. Our Windsor Factory, located on 161 acres, covers an impressive 666,000 square feet and manufactures blades for the V163-4.5 MW turbine and the 2 MW platform. With over 1,300 employees on site, the factory plays a vital role in our operations.
About The Role As a Technical Support Production Engineer within the Technical Support Department, you are responsible for maintaining the stability and performance of the carbon composite turbine production systems. Each engineer monitors systems, responds to incidents, troubleshoots issues, and ensures that production is restored quickly when problems occur.
Key Responsibilities
Analyze existing manufacturing processes to identify production efficiencies
Conceive, design, develop, and test innovative solutions based on analysis and organizational objectives
Design methods and collaborate on ideas for maintaining or increasing production capacity while improving safety, quality, and production costs
Work closely with production staff to meet production plans
Identify process problems that reduce downtime and conserve maintenance costs
Conduct root‑cause analysis of process failure modes and implement corrective actions to reduce cost of poor quality and cycle time
Monitor process equipment to identify potential failure modes and develop solutions that eliminate recurrence
Develop, create, and maintain required documentation for manufacturing processes, including flow charts, capacity and utilization studies, procedures, process work instructions, and tests
Follow and maintain organizational documentation systems and standards
Develop and update process procedures to ensure accurate and understandable documentation
Collaborate with cross‑functional teams to gain insights and direction
Interface with all levels of management and employees to gather information and provide guidance for implementation
Provide extensive support during the introduction of new equipment, products, materials, and technology
Initiate, lead, and participate in improvement projects and capacity expansion/conversion initiatives
Review and create investment requests regarding the purchase of new equipment/materials
Coordinate equipment maintenance and improvements
Front‑line support for programming and troubleshooting robotic & automated equipment/machines
Identify process technical specifications or instructions when purchasing new equipment
Interpret drawings, Process Inspection Instructions (PII), and Process Work Instructions (PWI)
Support control and audit of Bill of Materials (BOM)
Manage and conduct employee training for productivity improvement projects and mentor fellow engineers and technicians
Perform all other duties as assigned
Competencies
Demonstrated teamwork skills
High degree of flexibility
Strong interest in developing new skills and understanding
Commitment to high standards and team engagement
Personal desire/valuation for producing quality work
Ability to work as a craftsman with hand tools
Problem‑solver orientation
Good communication skills
Effective leadership skills
Provides direction for team and tasks
Customer focus
Qualifications
Bachelor’s degree in engineering (Mechanical or Manufacturing/Industrial with a broad understanding of Electrical and Chemical preferred)
5+ years of related experience and/or training; or equivalent combination of education and experience
Proficiency in multiple types of controls, tooling geometry, machine‑tool processes, and fixture design
Experience with lean manufacturing, process optimization, and continuous improvement methodologies
Knowledge and experience in the application of quality, health, safety, and environmental management systems
Skills And Qualifications
Experience with PTC Creo, SolidWorks, and AutoCAD
Knowledge of advanced product quality planning (APQP) and production part approval (PPAP)
Knowledge of factory and site acceptance tests for new equipment (FAT/SAT)
PLC (programmable logic controller)
Composite manufacturing experience
Knowledge of Enterprise Asset Management (EAM) systems
Experience in SAP software
What We Offer
One of the most comprehensive benefits plans in the industry
Comprehensive medical, dental, and vision coverage
Generous paid time off & parental leave
401(k) plan with employer match
Tuition assistance
Salary Offered $85,000 – $120,000
DEIB Statement At Vestas, we recognize the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate because of their identity or feel they do not meet every criterion. Our CEO states, “Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry.” Your unique perspective is what will help us power the solution for a sustainable, green energy future.
About Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines, both onshore and offshore. With more than 185 GW of wind power installed worldwide and 40+ years of experience, we have a proven track record of innovation and leadership. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future.
#J-18808-Ljbffr
About The Role As a Technical Support Production Engineer within the Technical Support Department, you are responsible for maintaining the stability and performance of the carbon composite turbine production systems. Each engineer monitors systems, responds to incidents, troubleshoots issues, and ensures that production is restored quickly when problems occur.
Key Responsibilities
Analyze existing manufacturing processes to identify production efficiencies
Conceive, design, develop, and test innovative solutions based on analysis and organizational objectives
Design methods and collaborate on ideas for maintaining or increasing production capacity while improving safety, quality, and production costs
Work closely with production staff to meet production plans
Identify process problems that reduce downtime and conserve maintenance costs
Conduct root‑cause analysis of process failure modes and implement corrective actions to reduce cost of poor quality and cycle time
Monitor process equipment to identify potential failure modes and develop solutions that eliminate recurrence
Develop, create, and maintain required documentation for manufacturing processes, including flow charts, capacity and utilization studies, procedures, process work instructions, and tests
Follow and maintain organizational documentation systems and standards
Develop and update process procedures to ensure accurate and understandable documentation
Collaborate with cross‑functional teams to gain insights and direction
Interface with all levels of management and employees to gather information and provide guidance for implementation
Provide extensive support during the introduction of new equipment, products, materials, and technology
Initiate, lead, and participate in improvement projects and capacity expansion/conversion initiatives
Review and create investment requests regarding the purchase of new equipment/materials
Coordinate equipment maintenance and improvements
Front‑line support for programming and troubleshooting robotic & automated equipment/machines
Identify process technical specifications or instructions when purchasing new equipment
Interpret drawings, Process Inspection Instructions (PII), and Process Work Instructions (PWI)
Support control and audit of Bill of Materials (BOM)
Manage and conduct employee training for productivity improvement projects and mentor fellow engineers and technicians
Perform all other duties as assigned
Competencies
Demonstrated teamwork skills
High degree of flexibility
Strong interest in developing new skills and understanding
Commitment to high standards and team engagement
Personal desire/valuation for producing quality work
Ability to work as a craftsman with hand tools
Problem‑solver orientation
Good communication skills
Effective leadership skills
Provides direction for team and tasks
Customer focus
Qualifications
Bachelor’s degree in engineering (Mechanical or Manufacturing/Industrial with a broad understanding of Electrical and Chemical preferred)
5+ years of related experience and/or training; or equivalent combination of education and experience
Proficiency in multiple types of controls, tooling geometry, machine‑tool processes, and fixture design
Experience with lean manufacturing, process optimization, and continuous improvement methodologies
Knowledge and experience in the application of quality, health, safety, and environmental management systems
Skills And Qualifications
Experience with PTC Creo, SolidWorks, and AutoCAD
Knowledge of advanced product quality planning (APQP) and production part approval (PPAP)
Knowledge of factory and site acceptance tests for new equipment (FAT/SAT)
PLC (programmable logic controller)
Composite manufacturing experience
Knowledge of Enterprise Asset Management (EAM) systems
Experience in SAP software
What We Offer
One of the most comprehensive benefits plans in the industry
Comprehensive medical, dental, and vision coverage
Generous paid time off & parental leave
401(k) plan with employer match
Tuition assistance
Salary Offered $85,000 – $120,000
DEIB Statement At Vestas, we recognize the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate because of their identity or feel they do not meet every criterion. Our CEO states, “Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry.” Your unique perspective is what will help us power the solution for a sustainable, green energy future.
About Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines, both onshore and offshore. With more than 185 GW of wind power installed worldwide and 40+ years of experience, we have a proven track record of innovation and leadership. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future.
#J-18808-Ljbffr