ZipRecruiter
Senior Maintenance Mechanic - Instrument/Electrical/Controls
ZipRecruiter, Tucson, Arizona, United States, 85718
Job DescriptionJob Description
This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information
General Description:
The Senior Maintenance Mechanic is an hourly position reporting to the Maintenance Supervisor. The Senior Maintenance Mechanic is responsible for all aspects of facility maintenance. This position requires an individual with in-depth knowledge of general maintenance and requires performing duties with little to no supervision. Dependability and attention to detail are required characteristics. The maintenance work environment involves the handling of hazardous chemicals. The ability to use a personal respirator is required. The physical demands of this position may involve standing for extended periods as well as frequent lifting of items weighing between 40-55 lbs.
Primary Responsibilities:
Achieve daily and job specific goals
Provide maintenance support to other departments
Troubleshoot, repair, and perform preventive maintenance to production and facilities equipment
Install new, or relocate existing, equipment with all required utilities, including water, compressed air, electrical (three phase), steam, hydraulic, and vacuum.
Practice safe and efficient work habits
Direct maintenance mechanics and maintenance operators as required
Utilize REDAR’s CMMS platform, including the use of tablets and other electronic devices
Education and Experience Requirements:
High School graduate or equivalent
Able to read, write, and understand company written procedures
Basic computer skills such as Microsoft office
Minimum
10 years' experience in industrial maintenance
including knowledge in troubleshooting equipment and systems, plumbing, steam, hydraulics, pneumatics, mechanics, pumps, some welding and basic electrical
Must be able to read and understand equipment manuals, blueprints and hydraulic/pneumatic schematics
Certifications (or the ability to certify) in one or more of the following are required:
HVAC (Universal)
Welding
Commercial or Industrial Electrical
Instrumentation, or I&E
Special Tasks and Focus Areas:
Achieve daily and job specific goals
Complete jobs on time as assigned by Maintenance Planner, Supervisor, Facilities Engineer, or the Chief Facilities Engineer
Provide maintenance support to other departments
Respond to production requirements
Adjust priorities to ensure critical operations experience minimal downtime
Recognize and correct, repair, or report facility or equipment problems independently
Communicate with area management as to status of maintenance workorder(s)
Troubleshoot, repair, and perform preventive maintenance to production and facilities equipment
Conduct preventive maintenance
Exercise knowledge of mechanical systems, steam systems, hydraulics, pneumatics, basic electrical, compressors, vacuum systems and welding
Cleanup work area removing all tools, debris, dirt, overspray, etc.
Install new, or relocate existing, equipment with all required utilities, including water, compressed air, electrical (three phase), steam, hydraulic, and vacuum.
Layout area for equipment
Identify location of all utilities
Install all required utilities
Safely rig and move equipment
Cleanup work area removing all tools, debris, dirt, overspray, etc.
Practice safe and efficient work habits
Follow all REDAR rules and policies
Always use required PPE (Personal Protective Equipment)
Make sure others in the area are wearing PPE or are at a safe distance from the work
Protect adjacent equipment, tooling, tables, etc. from debris or overspray
Cleanup work area removing all tools, debris, dirt, overspray, etc.
Direct maintenance mechanics and maintenance operators as required
Assign specific tasks when mechanics or operators are helping on a job
Make sure they are wearing PPE
Direct cleanup of work area removing all tools, debris, dirt, overspray, etc.
R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to , , , , , , , , status as protected veteran, among other things, or status as qualified individual with
This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information
General Description:
The Senior Maintenance Mechanic is an hourly position reporting to the Maintenance Supervisor. The Senior Maintenance Mechanic is responsible for all aspects of facility maintenance. This position requires an individual with in-depth knowledge of general maintenance and requires performing duties with little to no supervision. Dependability and attention to detail are required characteristics. The maintenance work environment involves the handling of hazardous chemicals. The ability to use a personal respirator is required. The physical demands of this position may involve standing for extended periods as well as frequent lifting of items weighing between 40-55 lbs.
Primary Responsibilities:
Achieve daily and job specific goals
Provide maintenance support to other departments
Troubleshoot, repair, and perform preventive maintenance to production and facilities equipment
Install new, or relocate existing, equipment with all required utilities, including water, compressed air, electrical (three phase), steam, hydraulic, and vacuum.
Practice safe and efficient work habits
Direct maintenance mechanics and maintenance operators as required
Utilize REDAR’s CMMS platform, including the use of tablets and other electronic devices
Education and Experience Requirements:
High School graduate or equivalent
Able to read, write, and understand company written procedures
Basic computer skills such as Microsoft office
Minimum
10 years' experience in industrial maintenance
including knowledge in troubleshooting equipment and systems, plumbing, steam, hydraulics, pneumatics, mechanics, pumps, some welding and basic electrical
Must be able to read and understand equipment manuals, blueprints and hydraulic/pneumatic schematics
Certifications (or the ability to certify) in one or more of the following are required:
HVAC (Universal)
Welding
Commercial or Industrial Electrical
Instrumentation, or I&E
Special Tasks and Focus Areas:
Achieve daily and job specific goals
Complete jobs on time as assigned by Maintenance Planner, Supervisor, Facilities Engineer, or the Chief Facilities Engineer
Provide maintenance support to other departments
Respond to production requirements
Adjust priorities to ensure critical operations experience minimal downtime
Recognize and correct, repair, or report facility or equipment problems independently
Communicate with area management as to status of maintenance workorder(s)
Troubleshoot, repair, and perform preventive maintenance to production and facilities equipment
Conduct preventive maintenance
Exercise knowledge of mechanical systems, steam systems, hydraulics, pneumatics, basic electrical, compressors, vacuum systems and welding
Cleanup work area removing all tools, debris, dirt, overspray, etc.
Install new, or relocate existing, equipment with all required utilities, including water, compressed air, electrical (three phase), steam, hydraulic, and vacuum.
Layout area for equipment
Identify location of all utilities
Install all required utilities
Safely rig and move equipment
Cleanup work area removing all tools, debris, dirt, overspray, etc.
Practice safe and efficient work habits
Follow all REDAR rules and policies
Always use required PPE (Personal Protective Equipment)
Make sure others in the area are wearing PPE or are at a safe distance from the work
Protect adjacent equipment, tooling, tables, etc. from debris or overspray
Cleanup work area removing all tools, debris, dirt, overspray, etc.
Direct maintenance mechanics and maintenance operators as required
Assign specific tasks when mechanics or operators are helping on a job
Make sure they are wearing PPE
Direct cleanup of work area removing all tools, debris, dirt, overspray, etc.
R.E. Darling Co., Inc. is an equal opportunity employer. All qualified applicants will receive consideration of employment without regard to , , , , , , , , status as protected veteran, among other things, or status as qualified individual with