PEAK Technical Staffing USA
Manufacturing Inspector - CMM
PEAK Technical Staffing USA, Elyria, Ohio, United States, 44036
1st Shift - 6am - 2:30pm
Must be a US Citizen and have HS Diploma/GED
Position Summary:
With limited guidance in a team environment, responsible for various semi-complex inspection requirements.
Responsibilities: Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments, or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history.
Inspection: Perform moderate inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings, and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups. Interpret specifications, charts, manuals, and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements, and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments, or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test, and shipping departments. Assist customer/government source inspectors as necessary.
Calibration (preferred but not required): Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions, or related documents. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment.
Additional Responsibilities: Actively participate in department problem-solving, lean events, and high-performance teams. Actively maintain 5S in the department. Other duties as required to assist the team leader.
Job Requirements: Three (3) to Five (5) years related inspection and/or calibration or demonstrated ability to perform described responsibilities. Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. Knowledge of applicable military standards or specifications required. Proficient in reading and interpreting blueprints, customer's specifications, and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry. Personal hand tools may be required. May be required to lift up to 50 lbs. Must demonstrate effective verbal, written, and interpersonal communication skills. Ability to work effectively with others and be a participative team player. May be required to post and report on Team Improvement Board metrics. Must be able to pass current Solder Inspection Certification per Division/Site standards (or is already a certified solder inspector). Must enter into and meet the requirements of the site's FAA/DOT Random Drug and Alcohol Program for covered employees who inspect safety-sensitive products. Must be willing and able to work with customer auditors and source inspectors. Will be responsible for managing Final Inspection record control. P-CSD-001
Benefits:
PEAK believes that taking care of our team is essential for success and we are proud to provide benefits that enhance both your well-being and your future.
PEAK's benefit offerings available for our associates include medical, dental, vision, Flexible Spending Account (FSA), Dependent Care Savings Account (DCA), and 401K plan.
Additionally, our associates may be eligible for Paid Sick Leave as required by Federal, State, or local laws.
Equal Opportunity Employer (EEO):
PEAK Technical Staffing is committed to creating a diverse and inclusive environment and is proud to be an Equal Opportunity Employer. PEAK does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status, or any other characteristic protected by applicable law. All employment decisions are made based on qualifications, merit, and business need. We encourage all individuals to apply.
Candidate Privacy
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://peaktechnical.com/privacy-policy/ and https://peaktechnical.com/ca-residents-privacy-rights/
Position Summary:
With limited guidance in a team environment, responsible for various semi-complex inspection requirements.
Responsibilities: Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments, or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history.
Inspection: Perform moderate inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings, and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups. Interpret specifications, charts, manuals, and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements, and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments, or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test, and shipping departments. Assist customer/government source inspectors as necessary.
Calibration (preferred but not required): Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions, or related documents. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment.
Additional Responsibilities: Actively participate in department problem-solving, lean events, and high-performance teams. Actively maintain 5S in the department. Other duties as required to assist the team leader.
Job Requirements: Three (3) to Five (5) years related inspection and/or calibration or demonstrated ability to perform described responsibilities. Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. Knowledge of applicable military standards or specifications required. Proficient in reading and interpreting blueprints, customer's specifications, and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry. Personal hand tools may be required. May be required to lift up to 50 lbs. Must demonstrate effective verbal, written, and interpersonal communication skills. Ability to work effectively with others and be a participative team player. May be required to post and report on Team Improvement Board metrics. Must be able to pass current Solder Inspection Certification per Division/Site standards (or is already a certified solder inspector). Must enter into and meet the requirements of the site's FAA/DOT Random Drug and Alcohol Program for covered employees who inspect safety-sensitive products. Must be willing and able to work with customer auditors and source inspectors. Will be responsible for managing Final Inspection record control. P-CSD-001
Benefits:
PEAK believes that taking care of our team is essential for success and we are proud to provide benefits that enhance both your well-being and your future.
PEAK's benefit offerings available for our associates include medical, dental, vision, Flexible Spending Account (FSA), Dependent Care Savings Account (DCA), and 401K plan.
Additionally, our associates may be eligible for Paid Sick Leave as required by Federal, State, or local laws.
Equal Opportunity Employer (EEO):
PEAK Technical Staffing is committed to creating a diverse and inclusive environment and is proud to be an Equal Opportunity Employer. PEAK does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status, or any other characteristic protected by applicable law. All employment decisions are made based on qualifications, merit, and business need. We encourage all individuals to apply.
Candidate Privacy
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://peaktechnical.com/privacy-policy/ and https://peaktechnical.com/ca-residents-privacy-rights/