Microspec Corporation
Quality Control Inspector 1 - UPDATED
Microspec Corporation, Peterborough, New Hampshire, United States, 03458
Job Description
Job Description
Qualifications: a. High school diploma or GED required b. 0–3 years of relevant experience preferred; prior quality experience preferred, within GMP manufacturing environment is a plus c. Demonstrate all Basic Position Skills d. Familiarity with the fundamental concepts of Engineering drawings, inspection and documentation e. Demonstrate initiative and self-motivation to grow and succeed within the position f. Able to work semi-independently after initial training g. Display aptitude and willingness to learn and accept coaching h. Will receive hands-on training to support competency within the role i. Will receive opportunity and training to support growth within QC 2. Basic Position Skills: a. Flexibility – Able to adapt to shifting priorities and tasks b. Time Management – Able to balance multiple responsibilities and complete them efficiently c. Aptitude – Able to apply training effectively to assigned tasks d. Attention to Detail – Able to complete all documentation thoroughly and correctly e. Communication – Able to receive and give feedback and work well with others to achieve shared goals f. Mature work ethic – punctual with demonstrated good attendance record 3. Reports to: Quality Supervisor 4. Primary job responsibility: The QC Inspector Level 1 is an entry-level position within the Quality Control department. This position is focused on developing and applying foundational knowledge and the hands-on skills and competencies necessary for the inspection of extruded components utilized in Medical Devices. The Level 1 Inspector utilizes basic and foundational methods and gages to perform inspections of extruded product to determine conformance to defined specifications, adheres to GDP documentation requirements, and contributes to the daily productivity of the QC Team. This position is performed with guidance and supervision with increasing independence with experience 5. Essential functions of position: Perform Final Inspection for product Lot Release a. Prepare, follow and perform final inspections as defined on inspection paperwork for lot release b. Perform inspections using defined methods, gages and equipment c. Apply and follow ANSI and C = 0 Sampling Plans d. Document inspection results and complete all inspection paperwork as required e. Assess conformance to defined specifications and requirements f. Identify and document non-conformances to defined specifications and requirements g. Recognize, document and escalate quality concerns and issues h. Complete end-of-shift reporting Perform Start up and In-process inspection of manufacturing extrusion lines a. Prepare, follow and perform start-up and in-process inspections as defined on inspection paperwork of high-volume extrusion lines for production parts exhibiting recurring similar and consistent product geometries and materials and inspection methods b. Perform inspections using defined methods, gages and equipment c. Document inspection results and complete all inspection paperwork as required d. Assess conformance to defined specifications and requirements e. Identify and document non-conformances to defined specifications and requirements f. Communicate inspection results to the extrusion technician or operator g. Recognize, document and escalate quality concerns and issues h. Identify, document, and communicate at-risk product to appropriate personnel Inspection Methods, Gages and Equipment a. Utilize pin gages, ring gages, calipers, rulers, vision systems, and other applicable gages as specified and within scope of training b. Recognize and respond to basic visual and dimensional quality indicators and erroneous data c. Create efficiencies within the inspection process d. Identify and report equipment and gages outside of calibration dates and exhibiting damage, wear, or malfunctions Documentation and Compliance e. Adhere to Good Documentation Practices (GDP) requirements f. Maintain accurate and complete records in all required documentation g. Follow defined processes and procedures appropriately and effectively h. Maintain product and lot traceability throughout the workflow and in all inspection documentation Safety and Housekeeping a. Follow all requirements and equipment safety procedures b. Identify and report safety hazards c. Keep work area clean and organized Communication a. Professional and courteous interactions b. Effective use of email and daily reporting Work Environment: a. Dynamic and fast-paced manufacturing floor b. Exposure to noise, high temperatures, moving machinery, and high-voltage equipment c. Clean room and gowning requirements Is the work described above checked by another individual?
YES Consistent motor skills and other requirements of the position: Persistent: Standing: 10% Sitting: 75% Walking: 15% Consistent lifting of up to 35 lbs. – Rarely Minimum lifting of 1 lb. – Frequently Maximum carrying distance of up to 30 ft. – Occasionally Reaching – must be able to reach machines and/or materials up to 6 ft. from floor – Frequently Kneeling – N/A Climbing stairs – N/A Repetitive motion – right/left hand/wrist – Frequently Repetitive motion – right/left foot/ankle – N/A Continuous arm motions – Yes Must be able to avoid potentially moving object which could cause injury – Yes Must be able to grasp and move object consistently and regularly – Yes Vision: intricate nature of work requires vision of 20/20 with or without corrective lenses – Yes Must be able to use gaging equipment and tools – Yes Must demonstrate ability to work productively and efficiently with others – Yes Microspec offers competitive wages and benefits including: Sign-On Bonus Comprehensive Health Insurance Matching 401K plan annually after 1 year Entry level 2 weeks paid vacation 64 Hours personal/sick time (unused time paid out at end of year) Annual discretionary bonus Salary range-$23-$26 per hour based on experience 20% Second Shift Differential 25% Third Shift Differential
Job Description
Qualifications: a. High school diploma or GED required b. 0–3 years of relevant experience preferred; prior quality experience preferred, within GMP manufacturing environment is a plus c. Demonstrate all Basic Position Skills d. Familiarity with the fundamental concepts of Engineering drawings, inspection and documentation e. Demonstrate initiative and self-motivation to grow and succeed within the position f. Able to work semi-independently after initial training g. Display aptitude and willingness to learn and accept coaching h. Will receive hands-on training to support competency within the role i. Will receive opportunity and training to support growth within QC 2. Basic Position Skills: a. Flexibility – Able to adapt to shifting priorities and tasks b. Time Management – Able to balance multiple responsibilities and complete them efficiently c. Aptitude – Able to apply training effectively to assigned tasks d. Attention to Detail – Able to complete all documentation thoroughly and correctly e. Communication – Able to receive and give feedback and work well with others to achieve shared goals f. Mature work ethic – punctual with demonstrated good attendance record 3. Reports to: Quality Supervisor 4. Primary job responsibility: The QC Inspector Level 1 is an entry-level position within the Quality Control department. This position is focused on developing and applying foundational knowledge and the hands-on skills and competencies necessary for the inspection of extruded components utilized in Medical Devices. The Level 1 Inspector utilizes basic and foundational methods and gages to perform inspections of extruded product to determine conformance to defined specifications, adheres to GDP documentation requirements, and contributes to the daily productivity of the QC Team. This position is performed with guidance and supervision with increasing independence with experience 5. Essential functions of position: Perform Final Inspection for product Lot Release a. Prepare, follow and perform final inspections as defined on inspection paperwork for lot release b. Perform inspections using defined methods, gages and equipment c. Apply and follow ANSI and C = 0 Sampling Plans d. Document inspection results and complete all inspection paperwork as required e. Assess conformance to defined specifications and requirements f. Identify and document non-conformances to defined specifications and requirements g. Recognize, document and escalate quality concerns and issues h. Complete end-of-shift reporting Perform Start up and In-process inspection of manufacturing extrusion lines a. Prepare, follow and perform start-up and in-process inspections as defined on inspection paperwork of high-volume extrusion lines for production parts exhibiting recurring similar and consistent product geometries and materials and inspection methods b. Perform inspections using defined methods, gages and equipment c. Document inspection results and complete all inspection paperwork as required d. Assess conformance to defined specifications and requirements e. Identify and document non-conformances to defined specifications and requirements f. Communicate inspection results to the extrusion technician or operator g. Recognize, document and escalate quality concerns and issues h. Identify, document, and communicate at-risk product to appropriate personnel Inspection Methods, Gages and Equipment a. Utilize pin gages, ring gages, calipers, rulers, vision systems, and other applicable gages as specified and within scope of training b. Recognize and respond to basic visual and dimensional quality indicators and erroneous data c. Create efficiencies within the inspection process d. Identify and report equipment and gages outside of calibration dates and exhibiting damage, wear, or malfunctions Documentation and Compliance e. Adhere to Good Documentation Practices (GDP) requirements f. Maintain accurate and complete records in all required documentation g. Follow defined processes and procedures appropriately and effectively h. Maintain product and lot traceability throughout the workflow and in all inspection documentation Safety and Housekeeping a. Follow all requirements and equipment safety procedures b. Identify and report safety hazards c. Keep work area clean and organized Communication a. Professional and courteous interactions b. Effective use of email and daily reporting Work Environment: a. Dynamic and fast-paced manufacturing floor b. Exposure to noise, high temperatures, moving machinery, and high-voltage equipment c. Clean room and gowning requirements Is the work described above checked by another individual?
YES Consistent motor skills and other requirements of the position: Persistent: Standing: 10% Sitting: 75% Walking: 15% Consistent lifting of up to 35 lbs. – Rarely Minimum lifting of 1 lb. – Frequently Maximum carrying distance of up to 30 ft. – Occasionally Reaching – must be able to reach machines and/or materials up to 6 ft. from floor – Frequently Kneeling – N/A Climbing stairs – N/A Repetitive motion – right/left hand/wrist – Frequently Repetitive motion – right/left foot/ankle – N/A Continuous arm motions – Yes Must be able to avoid potentially moving object which could cause injury – Yes Must be able to grasp and move object consistently and regularly – Yes Vision: intricate nature of work requires vision of 20/20 with or without corrective lenses – Yes Must be able to use gaging equipment and tools – Yes Must demonstrate ability to work productively and efficiently with others – Yes Microspec offers competitive wages and benefits including: Sign-On Bonus Comprehensive Health Insurance Matching 401K plan annually after 1 year Entry level 2 weeks paid vacation 64 Hours personal/sick time (unused time paid out at end of year) Annual discretionary bonus Salary range-$23-$26 per hour based on experience 20% Second Shift Differential 25% Third Shift Differential