Grant PUD
Power Production Electrical Engineer II-IV
Grant PUD, Ephrata, Washington, United States, 98823
Power Production Electrical Engineer II-IV
Be part of an Electrical Engineering team responsible for designing, developing, implementing, and maintaining electrical equipment within Grant County PUD's Priest Rapids and Wanapum Hydro Power Generation Facilities. This position is responsible to provide knowledge and expertise in their discipline related to Wanapum and Priest Rapids Hydro Dams, 230kV Switchyard and other Supporting Facilities within Grant County PUD's Power Production Department. Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include, but are not limited to, the following: Engineer II: Develop and implement low impact Electrical Projects throughout the Wanapum and Priest Rapids Hydro Power Generation Facilities and Supporting facilities. Basic Understanding about equipment that ranges from, but is not limited to, High/Medium/Low Voltage Distribution systems, PLC/VFD and Control Systems, Exciters, Governors, Generator Systems, Transformers (Distribution and GSU), SCADA Systems, Protective Relay Equipment, High/Medium/Low Voltage Circuit Breakers, Battery Systems, Bridge Cranes, Motor Control Centers as well as other supporting equipment that is required for the safe and reliable operation of the Generators and supporting equipment. Research, Design and Support the implementation of new and upgraded equipment throughout the Hydro Generation Facilities within their field of expertise, with considerable guidance from supervisor and peers. Project Management Support that include budget forecasts, scheduling, coordination, construction/commissioning for small-sized projects. Provide technical knowledge, when possible, to assist other Engineers, Electricians, Operators or other departments throughout Power Production in regard to troubleshooting, equipment outages, breakdowns or during detailed design of equipment based on knowledge and experience. This position will gain knowledge in skills related to best industry practice, Utility Standards, Codes or other Legal Standards that will be used to support electrical engineering projects and that are required for the safe and reliable operation of the equipment. A fully skilled candidate for the Engineer II will have some of the following knowledge, skills & abilities: Basic Understanding about Generators, Exciters, Governors and other Supporting equipment. Familiar with High/Medium Voltage Transmission and Distribution Equipment. Familiar with Switchgear equipment and MCC's related to Industrial Distribution Systems. Some experience with Industrial Control Systems related to Programmable Logic Controllers (PLC's), Variable Frequency Drives (VFD's), Motor Control Circuits and Instrumentation Devices such as (Flow Sensors, Level Sensors, Pressure Sensors, Temperature Sensors, etc) with an understanding of PID Loop Controls. Skills with Computer Programming in control languages such as Ladder Logix, C++, Structure Text, Block Logix, Visual Basic, etc. Technical writing and ability to draft reports associated with performance of critical equipment and their impacts to operations and maintenance. Generate, interpret, review and revise existing/new drawings Demonstrate commitment to Grant PUD's mission, vision, values, and strategic plan. The employee should be familiar with these organizational priorities and behave in a way that aligns with these expectations. Understand and adhere to compliance requirements for this position that may include laws, regulations, security guidelines, Grant PUD policies and procedures. Actively participate in all aspects of our safety program, including but not limited to: Following all safety policies and procedures. Alerting supervisors and coworkers to unsafe or hazardous working conditions. Reporting any safety incidents or close calls within 24 hours to your supervisor. Accepting feedback from supervisors and coworkers regarding your own safety performance. Engineer III: Develop and implement low/medium impact Electrical Projects throughout the Wanapum and Priest Rapids Hydro Power Generation Facilities, as well as the Power Production's 230kV Switchyard and Supporting facilities. Knowledgeable about equipment that ranges from, but is not limited to, High/Medium/Low Voltage Distribution systems, PLC/VFD and Control Systems, Exciters, Governors, Generator Systems, Transformers (Distribution and GSU), SCADA Systems, Protective Relay Equipment, High/Medium/Low Voltage Circuit Breakers, Battery Systems, Bridge Cranes, Motor Control Centers, etc as well as other supporting equipment that is required for the safe and reliable operation of the Generators and supporting equipment. Research, Design and Support the implementation of New and Upgraded equipment throughout the Hydro Generation Facilities within their field of expertise, with moderate guidance from supervisor and peers. Project Management Support that include budget forecasts, scheduling, coordination, construction/commissioning for medium-sized projects. Provide technical knowledge to assist other Engineers, Electricians, Operators or other departments throughout Power Production in regard to troubleshooting, equipment outages, breakdowns or during detailed design of equipment based on knowledge and experience. This position will have a basic understanding in skills related to best industry practice, Utility Standards, Codes or other Legal Standards that will be used to support electrical engineering projects and that are required for the safe and reliable operation of the equipment. Research and have an understanding related to impacts to FERC, NERC and CIP compliance standards. A fully skilled candidate for the Engineer III will have some of the following knowledge, skills & abilities: Knowledge related to Generators, Exciters, Governors and Supporting equipment. Familiar with High/Medium Voltage Transmission and Distribution Equipment. Experience with Station Service and Substation Equipment related to the Powerhouse Distribution Systems. Experience with Industrial Control Systems related to Programmable Logic Controllers (PLC's), Variable Frequency Drives (VFD's), Motor Control Circuits and Instrumentation Devices such as (Flow Sensors, Level Sensors, Pressure Sensors, Temperature Sensors, etc) with an understanding of PID Loop Controls. Skills with Computer Programming in control languages such as Ladder Logix, C++, Structure Text, Block Logix, Visual Basic, etc. Troubleshooting, maintenance experience and optimization techniques related to Operating systems, Electrical Equipment and around Generation Hydro Dams and High/Medium/Low Voltage Distribution systems. Basic Understanding of Data Communication protocols and networking equipment related to Protective Relays (SEL), PLC, HMI, VFD, Ethernet/Fiber switch communication systems. Technical writing and ability to draft reports associated with performance of critical equipment and their impacts to operations and maintenance. Generate, interpret, review and revise existing/new drawings Demonstrate commitment to Grant PUD's mission, vision, values, and strategic plan. The employee should be familiar with these organizational priorities and behave in a way that aligns with these expectations. Understand and adhere to compliance requirements for this position that may include laws, regulations, security guidelines, Grant PUD policies and procedures. Actively participate in all aspects of our safety program, including but not limited to: Following all safety policies and procedures. Alerting supervisors and coworkers to unsafe or hazardous working conditions. Reporting any safety incidents or close calls within 24 hours to your supervisor. Accepting feedback from supervisors and coworkers regarding your own safety performance. Engineer IV: High-level individual contributor (non-leadership) position in the Electrical Engineering Group responsible for developing and implementing medium/high impact Electrical Projects throughout the Wanapum and Priest Rapids Hydro Power Generation Facilities, as well as the Power Production's 230kV Switchyard and Supporting facilities. Expert on Equipment that ranges from, but is not limited to, High/Medium/Low Voltage Distribution systems, PLC/VFD and Control Systems, Exciters, Governors, Generator Systems, Transformers (Distribution and GSU), Ovation SCADA Systems, Protective Relay Equipment, High/Medium/Low Voltage Circuit Breakers, Battery Systems, Bridge Cranes, Motor Control Centers, etc as well as other supporting equipment that is required for the safe and reliable operation of the Generators and supporting equipment. Research, Design and Support the implementation of New and Upgraded equipment throughout the Hydro Generation Facilities within their field of expertise, with
Be part of an Electrical Engineering team responsible for designing, developing, implementing, and maintaining electrical equipment within Grant County PUD's Priest Rapids and Wanapum Hydro Power Generation Facilities. This position is responsible to provide knowledge and expertise in their discipline related to Wanapum and Priest Rapids Hydro Dams, 230kV Switchyard and other Supporting Facilities within Grant County PUD's Power Production Department. Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include, but are not limited to, the following: Engineer II: Develop and implement low impact Electrical Projects throughout the Wanapum and Priest Rapids Hydro Power Generation Facilities and Supporting facilities. Basic Understanding about equipment that ranges from, but is not limited to, High/Medium/Low Voltage Distribution systems, PLC/VFD and Control Systems, Exciters, Governors, Generator Systems, Transformers (Distribution and GSU), SCADA Systems, Protective Relay Equipment, High/Medium/Low Voltage Circuit Breakers, Battery Systems, Bridge Cranes, Motor Control Centers as well as other supporting equipment that is required for the safe and reliable operation of the Generators and supporting equipment. Research, Design and Support the implementation of new and upgraded equipment throughout the Hydro Generation Facilities within their field of expertise, with considerable guidance from supervisor and peers. Project Management Support that include budget forecasts, scheduling, coordination, construction/commissioning for small-sized projects. Provide technical knowledge, when possible, to assist other Engineers, Electricians, Operators or other departments throughout Power Production in regard to troubleshooting, equipment outages, breakdowns or during detailed design of equipment based on knowledge and experience. This position will gain knowledge in skills related to best industry practice, Utility Standards, Codes or other Legal Standards that will be used to support electrical engineering projects and that are required for the safe and reliable operation of the equipment. A fully skilled candidate for the Engineer II will have some of the following knowledge, skills & abilities: Basic Understanding about Generators, Exciters, Governors and other Supporting equipment. Familiar with High/Medium Voltage Transmission and Distribution Equipment. Familiar with Switchgear equipment and MCC's related to Industrial Distribution Systems. Some experience with Industrial Control Systems related to Programmable Logic Controllers (PLC's), Variable Frequency Drives (VFD's), Motor Control Circuits and Instrumentation Devices such as (Flow Sensors, Level Sensors, Pressure Sensors, Temperature Sensors, etc) with an understanding of PID Loop Controls. Skills with Computer Programming in control languages such as Ladder Logix, C++, Structure Text, Block Logix, Visual Basic, etc. Technical writing and ability to draft reports associated with performance of critical equipment and their impacts to operations and maintenance. Generate, interpret, review and revise existing/new drawings Demonstrate commitment to Grant PUD's mission, vision, values, and strategic plan. The employee should be familiar with these organizational priorities and behave in a way that aligns with these expectations. Understand and adhere to compliance requirements for this position that may include laws, regulations, security guidelines, Grant PUD policies and procedures. Actively participate in all aspects of our safety program, including but not limited to: Following all safety policies and procedures. Alerting supervisors and coworkers to unsafe or hazardous working conditions. Reporting any safety incidents or close calls within 24 hours to your supervisor. Accepting feedback from supervisors and coworkers regarding your own safety performance. Engineer III: Develop and implement low/medium impact Electrical Projects throughout the Wanapum and Priest Rapids Hydro Power Generation Facilities, as well as the Power Production's 230kV Switchyard and Supporting facilities. Knowledgeable about equipment that ranges from, but is not limited to, High/Medium/Low Voltage Distribution systems, PLC/VFD and Control Systems, Exciters, Governors, Generator Systems, Transformers (Distribution and GSU), SCADA Systems, Protective Relay Equipment, High/Medium/Low Voltage Circuit Breakers, Battery Systems, Bridge Cranes, Motor Control Centers, etc as well as other supporting equipment that is required for the safe and reliable operation of the Generators and supporting equipment. Research, Design and Support the implementation of New and Upgraded equipment throughout the Hydro Generation Facilities within their field of expertise, with moderate guidance from supervisor and peers. Project Management Support that include budget forecasts, scheduling, coordination, construction/commissioning for medium-sized projects. Provide technical knowledge to assist other Engineers, Electricians, Operators or other departments throughout Power Production in regard to troubleshooting, equipment outages, breakdowns or during detailed design of equipment based on knowledge and experience. This position will have a basic understanding in skills related to best industry practice, Utility Standards, Codes or other Legal Standards that will be used to support electrical engineering projects and that are required for the safe and reliable operation of the equipment. Research and have an understanding related to impacts to FERC, NERC and CIP compliance standards. A fully skilled candidate for the Engineer III will have some of the following knowledge, skills & abilities: Knowledge related to Generators, Exciters, Governors and Supporting equipment. Familiar with High/Medium Voltage Transmission and Distribution Equipment. Experience with Station Service and Substation Equipment related to the Powerhouse Distribution Systems. Experience with Industrial Control Systems related to Programmable Logic Controllers (PLC's), Variable Frequency Drives (VFD's), Motor Control Circuits and Instrumentation Devices such as (Flow Sensors, Level Sensors, Pressure Sensors, Temperature Sensors, etc) with an understanding of PID Loop Controls. Skills with Computer Programming in control languages such as Ladder Logix, C++, Structure Text, Block Logix, Visual Basic, etc. Troubleshooting, maintenance experience and optimization techniques related to Operating systems, Electrical Equipment and around Generation Hydro Dams and High/Medium/Low Voltage Distribution systems. Basic Understanding of Data Communication protocols and networking equipment related to Protective Relays (SEL), PLC, HMI, VFD, Ethernet/Fiber switch communication systems. Technical writing and ability to draft reports associated with performance of critical equipment and their impacts to operations and maintenance. Generate, interpret, review and revise existing/new drawings Demonstrate commitment to Grant PUD's mission, vision, values, and strategic plan. The employee should be familiar with these organizational priorities and behave in a way that aligns with these expectations. Understand and adhere to compliance requirements for this position that may include laws, regulations, security guidelines, Grant PUD policies and procedures. Actively participate in all aspects of our safety program, including but not limited to: Following all safety policies and procedures. Alerting supervisors and coworkers to unsafe or hazardous working conditions. Reporting any safety incidents or close calls within 24 hours to your supervisor. Accepting feedback from supervisors and coworkers regarding your own safety performance. Engineer IV: High-level individual contributor (non-leadership) position in the Electrical Engineering Group responsible for developing and implementing medium/high impact Electrical Projects throughout the Wanapum and Priest Rapids Hydro Power Generation Facilities, as well as the Power Production's 230kV Switchyard and Supporting facilities. Expert on Equipment that ranges from, but is not limited to, High/Medium/Low Voltage Distribution systems, PLC/VFD and Control Systems, Exciters, Governors, Generator Systems, Transformers (Distribution and GSU), Ovation SCADA Systems, Protective Relay Equipment, High/Medium/Low Voltage Circuit Breakers, Battery Systems, Bridge Cranes, Motor Control Centers, etc as well as other supporting equipment that is required for the safe and reliable operation of the Generators and supporting equipment. Research, Design and Support the implementation of New and Upgraded equipment throughout the Hydro Generation Facilities within their field of expertise, with