Herr's
Senior Projects Engineer
We are currently seeking a qualified individual for the Senior Projects Engineer position, joining our Nottingham, PA team! This role is responsible for leading and performing engineering projects with a primary focus on manufacturing, automation, equipment/process engineering, and continuous improvement which may include equipment redesign. Key Responsibilities
Project Administration & Implementation: Plans and leads implementations across the organization on operational mechanical maintenance projects on time and at or below budget for current and new product introductions. Supports the specification, evaluation, acquisition, installation and qualification of equipment. Manages tasks such as updating / maintaining / communicating project plans, progress reports and status updates. Collaborates with electrical engineer, PLC technicians, maintenance and others in the integrating of mechanical and electronic hardware for electromechanical product designs. Prepares and submits environmental reports under the direction of the Plant Engineer for air, water, hazardous waste and waste treatment that meet policy guidelines for federal, state and local standards. Collaborates with plant management to utilize equipment to improve employee safety, production quality, equipment reliability and overall equipment effectiveness utilizing Continuous Improvement techniques and a Manufacturing Execution System (MES). Project Analysis: Assesses problem situations to identify root cause, gathers and processes relevant information, and makes recommendations and/or resolves the problem. Performs calculations and/or uses computer analysis software to develop, analyze, and refine product models and design concepts. Determines the specification, acquisition, installation and qualification of equipment needed to meet manufacturing and production goals Evaluates operating metrics and supports development of new features and mechatronic systems. Communications: Effectively communicates major milestones (written or oral), priorities, bottlenecks and other major problems, across audiences at all levels of the organization. Collaborates and communicates with project team members cross-functionally and across the organizations in support of a variety of objectives throughout the full development lifecycle. Engages supervisors/maintenance staff and others to identify problems, malfunctions or to propose solutions. Confers with management and staff regarding safety procedures, equipment, and supplies. Partners with contractors to complete a variety of projects. Project Design: Uses basic knowledge of control systems for the applied design, operation, or troubleshooting of electro-mechanical systems. Translates concepts and information into images for manufacturing equipment projects. Solicits feedback from a variety of departments to modify designs, ensuring that established efficiency and safety targets are met. Recommends production/processing equipment or fixtures based on the organizational needs. Assists in reducing cost through re-engineering product/material redesign. Plan and develop facility expansion strategies and layouts. Qualifications
Bachelor's Degree in Mechanical, Mechanical Engineering Technology or Electro-Mechanical Engineering preferred. 10+ years related experience in a Manufacturing or Food Production environment is preferred. Microsoft Office 365 Suite intermediate experience required; advanced skills preferred. Lean Six Sigma green belt certification preferred, not required at hire Must be willing to travel 25% of time in order to complete projects at other company plants/locations. Working knowledge of project-based work structures and capturing documentation. Written communication skills to accurately create, maintain, and distribute dashboards, project timelines, and status reports. Ability to use statics, dynamics (or applied mechanics), strength of materials, engineering materials, engineering standards, and manufacturing processes to aid in the characterization, analysis, and troubleshooting of electro-mechanical systems. Proficient time management skills to concentrate efforts on most important priorities and manage a broad range of activities. Solid communication skills to effectively work with a broad spectrum of project team members to document issues, identify barriers and recommend suggested improvements. Intermediate to advanced knowledge of AutoDesk 2D and 3D CAD software and MS Project. Uses differential and integral calculus to characterize the static and dynamic performance of electro-mechanical systems. Experience leading and directing the work of others, direct and indirect reports. Performs other special projects/tasks assigned by management. Participates in continuous improvement or problem/solving activities. Assist in the development and upkeep of Preventative Maintenance System Self-starter attitude and ownership mentality for projects. Willingness to continuously learn and expand responsibilities. Physical requirements and work environment: Performs work required for this position in an office and manufacturing environment with often changes in temperature and overall environment (hot, cold, humid etc). Remains sedentary for moderate to extended periods of time. Required to us a computer monitor, keyboard, and mouse for extended periods of time. Ability to lift up to 50 pounds on occasion. About Herr Foods Inc.
Herr Foods Inc. is the largest privately owned salty snack food manufacturer and distributor in the country, we are based in Nottingham, PA and we think our 1600+ employees are pretty spectacular! We have been committed for the last 75+ years to making our Herr's family business an enjoyable place to work!
We are currently seeking a qualified individual for the Senior Projects Engineer position, joining our Nottingham, PA team! This role is responsible for leading and performing engineering projects with a primary focus on manufacturing, automation, equipment/process engineering, and continuous improvement which may include equipment redesign. Key Responsibilities
Project Administration & Implementation: Plans and leads implementations across the organization on operational mechanical maintenance projects on time and at or below budget for current and new product introductions. Supports the specification, evaluation, acquisition, installation and qualification of equipment. Manages tasks such as updating / maintaining / communicating project plans, progress reports and status updates. Collaborates with electrical engineer, PLC technicians, maintenance and others in the integrating of mechanical and electronic hardware for electromechanical product designs. Prepares and submits environmental reports under the direction of the Plant Engineer for air, water, hazardous waste and waste treatment that meet policy guidelines for federal, state and local standards. Collaborates with plant management to utilize equipment to improve employee safety, production quality, equipment reliability and overall equipment effectiveness utilizing Continuous Improvement techniques and a Manufacturing Execution System (MES). Project Analysis: Assesses problem situations to identify root cause, gathers and processes relevant information, and makes recommendations and/or resolves the problem. Performs calculations and/or uses computer analysis software to develop, analyze, and refine product models and design concepts. Determines the specification, acquisition, installation and qualification of equipment needed to meet manufacturing and production goals Evaluates operating metrics and supports development of new features and mechatronic systems. Communications: Effectively communicates major milestones (written or oral), priorities, bottlenecks and other major problems, across audiences at all levels of the organization. Collaborates and communicates with project team members cross-functionally and across the organizations in support of a variety of objectives throughout the full development lifecycle. Engages supervisors/maintenance staff and others to identify problems, malfunctions or to propose solutions. Confers with management and staff regarding safety procedures, equipment, and supplies. Partners with contractors to complete a variety of projects. Project Design: Uses basic knowledge of control systems for the applied design, operation, or troubleshooting of electro-mechanical systems. Translates concepts and information into images for manufacturing equipment projects. Solicits feedback from a variety of departments to modify designs, ensuring that established efficiency and safety targets are met. Recommends production/processing equipment or fixtures based on the organizational needs. Assists in reducing cost through re-engineering product/material redesign. Plan and develop facility expansion strategies and layouts. Qualifications
Bachelor's Degree in Mechanical, Mechanical Engineering Technology or Electro-Mechanical Engineering preferred. 10+ years related experience in a Manufacturing or Food Production environment is preferred. Microsoft Office 365 Suite intermediate experience required; advanced skills preferred. Lean Six Sigma green belt certification preferred, not required at hire Must be willing to travel 25% of time in order to complete projects at other company plants/locations. Working knowledge of project-based work structures and capturing documentation. Written communication skills to accurately create, maintain, and distribute dashboards, project timelines, and status reports. Ability to use statics, dynamics (or applied mechanics), strength of materials, engineering materials, engineering standards, and manufacturing processes to aid in the characterization, analysis, and troubleshooting of electro-mechanical systems. Proficient time management skills to concentrate efforts on most important priorities and manage a broad range of activities. Solid communication skills to effectively work with a broad spectrum of project team members to document issues, identify barriers and recommend suggested improvements. Intermediate to advanced knowledge of AutoDesk 2D and 3D CAD software and MS Project. Uses differential and integral calculus to characterize the static and dynamic performance of electro-mechanical systems. Experience leading and directing the work of others, direct and indirect reports. Performs other special projects/tasks assigned by management. Participates in continuous improvement or problem/solving activities. Assist in the development and upkeep of Preventative Maintenance System Self-starter attitude and ownership mentality for projects. Willingness to continuously learn and expand responsibilities. Physical requirements and work environment: Performs work required for this position in an office and manufacturing environment with often changes in temperature and overall environment (hot, cold, humid etc). Remains sedentary for moderate to extended periods of time. Required to us a computer monitor, keyboard, and mouse for extended periods of time. Ability to lift up to 50 pounds on occasion. About Herr Foods Inc.
Herr Foods Inc. is the largest privately owned salty snack food manufacturer and distributor in the country, we are based in Nottingham, PA and we think our 1600+ employees are pretty spectacular! We have been committed for the last 75+ years to making our Herr's family business an enjoyable place to work!