Pratt & Whitney
Overview
Pratt & Whitney's North Berwick Engineering Center is actively seeking a skilled and driven
Senior Design Engineer . This role involves close collaboration with our production team to ensure design solutions align with process capabilities and focuses on providing engineering support to manufacturing operations at the North Berwick facility.
What You Will Do
Work closely with North Berwick operations to ensure producible part designs and timely disposition of non-conforming material.
Work closely with North Berwick raw material suppliers to ensure producible part designs and timely disposition of non-conforming material.
Lead Green Belt/Black Belt/Red-X Specialties projects to identify production challenges and proposed solutions.
Process engineering changes to improve part producibility, reduce cost, or improve hardware throughput.
Assist in clearing Work-Stoppages/Escapes.
Ensure compliance with Pratt & Whitney's Engineering Knowledge System.
Travel up to 10% (domestic).
Qualifications You Must Have
Bachelor of Science degree in Mechanical, Aerospace, or related Engineering with 5 years of engineering experience with gas turbine components in operations or quality, or an advanced degree with 3 years of experience.
U.S. Citizen - U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Qualifications We Prefer
Master’s degree in Engineering or MBA.
Experience across several engineering disciplines (Design, Project Management, Analysis).
Project management skills, including resource planning, EVMS, critical path scheduling, and risk management; experience leading teams to meet technical, schedule, and budget requirements.
Ability to work and lead in collaboration with non-collocated teams.
Working knowledge of continuous improvement principles.
What We Offer
Eligible for Relocation.
Department/Segment Overview The North Berwick Engineering Center (NBEC) is responsible for engineering activities for hardware throughout the gas turbine, including the Fan, Low Pressure Compressor (LPC), High Pressure Compressor (HPC), Combustor, Low Pressure Turbine, High Pressure Turbine and Mechanical System modules across Pratt & Whitney's military and commercial products. NBEC is co-located with Pratt & Whitney's largest manufacturing facility. This opportunity is to join the Hot Section component designers team.
Role Type
Onsite: This role is onsite and requires working primarily at the assigned site. For onsite and hybrid roles, commuting to and from the site is the employee's personal responsibility.
The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including role, responsibilities, candidate experience, location, and education.
Hired applicants may be eligible for benefits, including medical, dental, vision, life insurance, disability coverage, 401(k) match, flexible spending accounts, flexible work schedules, and paid time off. The availability of benefits depends on the business unit and whether the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these programs are not guaranteed and depend on various factors including performance and company results.
This is a U.S.-based role. If the successful candidate resides in a U.S. territory, appropriate pay and benefits will apply.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable protected class. RTX provides affirmative action in employment for qualified individuals with a disability and protected veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms: Please review the policy and terms before applying.
Seniority level
Mid-Senior level
Employment type
Full-time
Job function
Engineering and Information Technology
Industries
Aviation and Aerospace Component Manufacturing
#J-18808-Ljbffr
Senior Design Engineer . This role involves close collaboration with our production team to ensure design solutions align with process capabilities and focuses on providing engineering support to manufacturing operations at the North Berwick facility.
What You Will Do
Work closely with North Berwick operations to ensure producible part designs and timely disposition of non-conforming material.
Work closely with North Berwick raw material suppliers to ensure producible part designs and timely disposition of non-conforming material.
Lead Green Belt/Black Belt/Red-X Specialties projects to identify production challenges and proposed solutions.
Process engineering changes to improve part producibility, reduce cost, or improve hardware throughput.
Assist in clearing Work-Stoppages/Escapes.
Ensure compliance with Pratt & Whitney's Engineering Knowledge System.
Travel up to 10% (domestic).
Qualifications You Must Have
Bachelor of Science degree in Mechanical, Aerospace, or related Engineering with 5 years of engineering experience with gas turbine components in operations or quality, or an advanced degree with 3 years of experience.
U.S. Citizen - U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Qualifications We Prefer
Master’s degree in Engineering or MBA.
Experience across several engineering disciplines (Design, Project Management, Analysis).
Project management skills, including resource planning, EVMS, critical path scheduling, and risk management; experience leading teams to meet technical, schedule, and budget requirements.
Ability to work and lead in collaboration with non-collocated teams.
Working knowledge of continuous improvement principles.
What We Offer
Eligible for Relocation.
Department/Segment Overview The North Berwick Engineering Center (NBEC) is responsible for engineering activities for hardware throughout the gas turbine, including the Fan, Low Pressure Compressor (LPC), High Pressure Compressor (HPC), Combustor, Low Pressure Turbine, High Pressure Turbine and Mechanical System modules across Pratt & Whitney's military and commercial products. NBEC is co-located with Pratt & Whitney's largest manufacturing facility. This opportunity is to join the Hot Section component designers team.
Role Type
Onsite: This role is onsite and requires working primarily at the assigned site. For onsite and hybrid roles, commuting to and from the site is the employee's personal responsibility.
The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including role, responsibilities, candidate experience, location, and education.
Hired applicants may be eligible for benefits, including medical, dental, vision, life insurance, disability coverage, 401(k) match, flexible spending accounts, flexible work schedules, and paid time off. The availability of benefits depends on the business unit and whether the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these programs are not guaranteed and depend on various factors including performance and company results.
This is a U.S.-based role. If the successful candidate resides in a U.S. territory, appropriate pay and benefits will apply.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable protected class. RTX provides affirmative action in employment for qualified individuals with a disability and protected veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms: Please review the policy and terms before applying.
Seniority level
Mid-Senior level
Employment type
Full-time
Job function
Engineering and Information Technology
Industries
Aviation and Aerospace Component Manufacturing
#J-18808-Ljbffr