JSP International
Job Type
Full-time
Description
Job Summary
Responsible for the repairs and maintenance of plant facilities and support equipment at JX1 and JX2, to include: boilers, air compressors, tower water system, pneumatic conveying, presses, resin manufacturing equipment, chemical feed systems, and other equipment.
Performs maintenance and repairs for primary production equipment and continuous improvement projects. The expected outcome is to maximize on-stream time for all production equipment and processes in the most cost effective and time efficient manner using JSP's standard best practices and following all procedures, work instructions and ground rules
Requirements
Describe its key responsibilities
Performs preventative maintenance (PM) tasks according to the manufacturer's recommendations and the PM schedules. Recommends necessary changes to the PM schedule.
Maintenance support of the all departments at JX1 and JX2 to maximize productivity and minimize operational costs while ensuring equipment remains operational and functions as intended.
Performs general plant maintenance under direct or indirect supervision of the Maintenance Supervisor, Engineering team, or Management as required.
Performs all tasks and duties in a safe manner, adhering to all safety rules, regulations, and procedures. This includes Lockout Tagout, Working at Heights, Confined Space, Hazardous Materials Handling, and all other applicable OSHA regulations/programs.
Maintain logs, charts and other documentation as required for maintenance systems.
Utilizes various hand held meters and other test equipment for checking and troubleshooting, voltage, amps, and calibrations of various control systems.
Communicates all pertinent information relating to maintenance activities, or problems incurred during the shift with the Supervisor and the other Maintenance Technicians. Communicates with the other Maintenance Techs on the off shift any information relating but not limited to maintenance support needed in any area throughout the shift.
Completes timely repairs and projects, as assigned.
General housekeeping for all maintenance locations; maintains work area in clean and neat order.
All other duties as assigned by manager/supervisor or designee.
Key Skills & Competencies: This position requires the ability to communicate effectively in person and in writing. Must be able to operate a forklift truck; which requires the use of arms and legs, the ability to get onto truck and depth perception to stack and/or move crates or other material. Must have finger dexterity and be able to see and hear. Must be able to climb and work from a ladder. Must be able to lift up to 75 lbs. Safety equipment consists of all forms of PPE such as; safety glasses, ear plugs and steel-toed shoes. Must be able to come to work as scheduled on a regular basis and be able to work scheduled shifts as necessary.
Performs responsibilities in compliance with all safety, quality, environmental procedures, OSHA regulations and JSP policies.
Preferred Qualifications: Ability to read and understand technical machine and operation manuals
Ability to read and understand diagrams, prints and schematics
Able to effectively utilize power tools
Excellent understanding of mechanical, pneumatic and hydraulic devices
Ability to troubleshoot and repair hydraulic, pneumatic, mechanical, and electrical type equipment
Effective communication (reading and writing) and basic math skills
Excellent electrical and mechanical aptitude
A high school diploma or GED is required.
2-4 years' experience of maintenance in a manufacturing environment.
Additional skills, certifications, education or experiences that would be beneficial.
Electrical and instrumentation experience
Basic OSHA training
Welding Certification
Boiler Certification
Work Environment & Physical Requirements
This position requires working in an active plant environment with exposure to noise, moving equipment, and varying temperatures. Must be able to operate a forklift (certification preferred/required), which involves climbing on and off the equipment, using arm and leg coordination, and having strong depth perception. Physical requirements include standing, bending, climbing ladders, and lifting up to 75lbs. Required PPE includes safety glasses, earplugs, and steel-toed shoes. Employees must be able to work scheduled shifts reliably, including overtime as needed.
Full-time
Description
Job Summary
Responsible for the repairs and maintenance of plant facilities and support equipment at JX1 and JX2, to include: boilers, air compressors, tower water system, pneumatic conveying, presses, resin manufacturing equipment, chemical feed systems, and other equipment.
Performs maintenance and repairs for primary production equipment and continuous improvement projects. The expected outcome is to maximize on-stream time for all production equipment and processes in the most cost effective and time efficient manner using JSP's standard best practices and following all procedures, work instructions and ground rules
Requirements
Describe its key responsibilities
Performs preventative maintenance (PM) tasks according to the manufacturer's recommendations and the PM schedules. Recommends necessary changes to the PM schedule.
Maintenance support of the all departments at JX1 and JX2 to maximize productivity and minimize operational costs while ensuring equipment remains operational and functions as intended.
Performs general plant maintenance under direct or indirect supervision of the Maintenance Supervisor, Engineering team, or Management as required.
Performs all tasks and duties in a safe manner, adhering to all safety rules, regulations, and procedures. This includes Lockout Tagout, Working at Heights, Confined Space, Hazardous Materials Handling, and all other applicable OSHA regulations/programs.
Maintain logs, charts and other documentation as required for maintenance systems.
Utilizes various hand held meters and other test equipment for checking and troubleshooting, voltage, amps, and calibrations of various control systems.
Communicates all pertinent information relating to maintenance activities, or problems incurred during the shift with the Supervisor and the other Maintenance Technicians. Communicates with the other Maintenance Techs on the off shift any information relating but not limited to maintenance support needed in any area throughout the shift.
Completes timely repairs and projects, as assigned.
General housekeeping for all maintenance locations; maintains work area in clean and neat order.
All other duties as assigned by manager/supervisor or designee.
Key Skills & Competencies: This position requires the ability to communicate effectively in person and in writing. Must be able to operate a forklift truck; which requires the use of arms and legs, the ability to get onto truck and depth perception to stack and/or move crates or other material. Must have finger dexterity and be able to see and hear. Must be able to climb and work from a ladder. Must be able to lift up to 75 lbs. Safety equipment consists of all forms of PPE such as; safety glasses, ear plugs and steel-toed shoes. Must be able to come to work as scheduled on a regular basis and be able to work scheduled shifts as necessary.
Performs responsibilities in compliance with all safety, quality, environmental procedures, OSHA regulations and JSP policies.
Preferred Qualifications: Ability to read and understand technical machine and operation manuals
Ability to read and understand diagrams, prints and schematics
Able to effectively utilize power tools
Excellent understanding of mechanical, pneumatic and hydraulic devices
Ability to troubleshoot and repair hydraulic, pneumatic, mechanical, and electrical type equipment
Effective communication (reading and writing) and basic math skills
Excellent electrical and mechanical aptitude
A high school diploma or GED is required.
2-4 years' experience of maintenance in a manufacturing environment.
Additional skills, certifications, education or experiences that would be beneficial.
Electrical and instrumentation experience
Basic OSHA training
Welding Certification
Boiler Certification
Work Environment & Physical Requirements
This position requires working in an active plant environment with exposure to noise, moving equipment, and varying temperatures. Must be able to operate a forklift (certification preferred/required), which involves climbing on and off the equipment, using arm and leg coordination, and having strong depth perception. Physical requirements include standing, bending, climbing ladders, and lifting up to 75lbs. Required PPE includes safety glasses, earplugs, and steel-toed shoes. Employees must be able to work scheduled shifts reliably, including overtime as needed.