SGS
Quality Assurance Inspector - Nuclear
SGS is currently seeking candidates to submit their applications to our clients. The positions can be permanent or contract and may be located anywhere across the USA. Hiring will begin around Q4 2025/Q1 2026, depending on the client's needs. You must be able to travel and work at various locations throughout the USA. Reporting to the Operation Manager, the incumbent will be responsible for monitoring the manufacturing of different components to ensure compliance with technical drawings, client specifications and applicable standards according to SGS procedures. The incumbent will perform various tasks related to the monitoring of manufacturing processes, such as progress reports, witness testing, welding, dimensional, pre-shipment, and loading inspections on a short-, medium-, and long-term basis. Tasks include: Perform tasks specified by his/her supervisor and/or department coordinator. Identify and analyse customer needs. Plan and prepare work to be completed onsite at the client's location (documents, equipment). Ensure that all equipment necessary is in proper working condition and that the calibration is still valid. Consult with clients and/or suppliers to obtain information required for carrying out the work. Coordinate actions with the client and/or supplier with regards to the manufacturer's project schedule. Ensure that onsite work completed at the client's location is consistent with the mandate, is completed on time and is conducted in a professional manner with meticulous attention to detail in order to provide excellent service. Review quality plans provided by manufacturers and their subcontractors. Review purchase orders intended for suppliers. Review technical specifications. Review test reports. Verify the implementation of quality plans and applicable procedures. Verify manufacturing compliance with drawings and technical specifications. Perform visual and dimensional welding inspections according to the criteria specified in the quote. Perform coating inspection according to the criteria specified in quote. Verify actual work progress. Communicate with the client when requested by the manager and/or supervisor. Complete the necessary quality forms related to monitoring or inspection work. Ensure that suppliers issue a non-conformance report and send it to the client if non-conformance is identified; Notify the client should non-conformance be identified at a work site; Prepare non-conformance reports and forward them to the manufacturer when non-conformance is identified; Ensure all non-conformance reports are closed prior to issuing delivery authorisation Participate in factory meetings when manufacturing quality is on the agenda; Witness manufacturing testing and trial assemblies; Prepare clear and concise reports within the prescribed time frames (usually 24 hours after completion); Perform administrative tasks such as data entry, filing and photocopying documents and issuing certificates, complete special projects. Qualifications include: Bachelor's degree in mechanical engineering or metallurgy, or a college degree combined with significant and relevant experience may be considered as equivalent; Experience with the following components: pressure vessels, reactor control components, turbine generator sets, forged raw materials for the large equipment, steam generator components and other major equipment for nuclear power plants. Certified W178.2 Welding Inspector, Certified as a NACE coating inspector, Qualified in non-destructive testing, ASME qualified (National Board, Authorized Inspection, Authorized Inspector Supervisor) and/or API qualified (510 Pressure Vessels Inspector, 570 Piping inspector or 936 Refractory Inspector) would be important assets. A minimum of 5 years of experience as a QA Inspector in the nuclear industry. Knowledge of materials processing techniques. Ability to read, understand and follow work instructions in a safe, accurate and timely manner. Proficient in using various types of computer software (Word, Excel. PowerPoint & Outlook). Proven ability to manage and coordinate multiple projects in a fast-paced, highly professional environment. Demonstrate verbal and written communication skills including grammar and composition in English. Ability to work well with others & independently. Proven time management skills and a strong attention to detail. Works well under pressure. Ensures full compliance with the company's Health & Safety, Code of Integrity, and Professional Conduct policies. Must possess a valid driver's licence. Work Schedule: Monday to Friday day work. Some exceptions might apply. Location: We are hiring locally but some travel might be required. Expected Start Date: Q4 2025 or Q1 2026 By submitting your resume to SGS, you consent to SGS sharing it with its clients.
SGS is currently seeking candidates to submit their applications to our clients. The positions can be permanent or contract and may be located anywhere across the USA. Hiring will begin around Q4 2025/Q1 2026, depending on the client's needs. You must be able to travel and work at various locations throughout the USA. Reporting to the Operation Manager, the incumbent will be responsible for monitoring the manufacturing of different components to ensure compliance with technical drawings, client specifications and applicable standards according to SGS procedures. The incumbent will perform various tasks related to the monitoring of manufacturing processes, such as progress reports, witness testing, welding, dimensional, pre-shipment, and loading inspections on a short-, medium-, and long-term basis. Tasks include: Perform tasks specified by his/her supervisor and/or department coordinator. Identify and analyse customer needs. Plan and prepare work to be completed onsite at the client's location (documents, equipment). Ensure that all equipment necessary is in proper working condition and that the calibration is still valid. Consult with clients and/or suppliers to obtain information required for carrying out the work. Coordinate actions with the client and/or supplier with regards to the manufacturer's project schedule. Ensure that onsite work completed at the client's location is consistent with the mandate, is completed on time and is conducted in a professional manner with meticulous attention to detail in order to provide excellent service. Review quality plans provided by manufacturers and their subcontractors. Review purchase orders intended for suppliers. Review technical specifications. Review test reports. Verify the implementation of quality plans and applicable procedures. Verify manufacturing compliance with drawings and technical specifications. Perform visual and dimensional welding inspections according to the criteria specified in the quote. Perform coating inspection according to the criteria specified in quote. Verify actual work progress. Communicate with the client when requested by the manager and/or supervisor. Complete the necessary quality forms related to monitoring or inspection work. Ensure that suppliers issue a non-conformance report and send it to the client if non-conformance is identified; Notify the client should non-conformance be identified at a work site; Prepare non-conformance reports and forward them to the manufacturer when non-conformance is identified; Ensure all non-conformance reports are closed prior to issuing delivery authorisation Participate in factory meetings when manufacturing quality is on the agenda; Witness manufacturing testing and trial assemblies; Prepare clear and concise reports within the prescribed time frames (usually 24 hours after completion); Perform administrative tasks such as data entry, filing and photocopying documents and issuing certificates, complete special projects. Qualifications include: Bachelor's degree in mechanical engineering or metallurgy, or a college degree combined with significant and relevant experience may be considered as equivalent; Experience with the following components: pressure vessels, reactor control components, turbine generator sets, forged raw materials for the large equipment, steam generator components and other major equipment for nuclear power plants. Certified W178.2 Welding Inspector, Certified as a NACE coating inspector, Qualified in non-destructive testing, ASME qualified (National Board, Authorized Inspection, Authorized Inspector Supervisor) and/or API qualified (510 Pressure Vessels Inspector, 570 Piping inspector or 936 Refractory Inspector) would be important assets. A minimum of 5 years of experience as a QA Inspector in the nuclear industry. Knowledge of materials processing techniques. Ability to read, understand and follow work instructions in a safe, accurate and timely manner. Proficient in using various types of computer software (Word, Excel. PowerPoint & Outlook). Proven ability to manage and coordinate multiple projects in a fast-paced, highly professional environment. Demonstrate verbal and written communication skills including grammar and composition in English. Ability to work well with others & independently. Proven time management skills and a strong attention to detail. Works well under pressure. Ensures full compliance with the company's Health & Safety, Code of Integrity, and Professional Conduct policies. Must possess a valid driver's licence. Work Schedule: Monday to Friday day work. Some exceptions might apply. Location: We are hiring locally but some travel might be required. Expected Start Date: Q4 2025 or Q1 2026 By submitting your resume to SGS, you consent to SGS sharing it with its clients.