TTM Technologies
Process Engineer - SMT Programmer (1st Shift)
TTM Technologies, Stafford Springs, Connecticut, us, 06076
TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer
About TTM
TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market.
Additional information can be found at www.ttm.com
Scope:
Responsible for direct technical support & defining the methodology by which printed circuit boards assemblies are manufactured efficiently and consistently in order to meet customer quality requirements
Applies common engineering principles to identify and quantify improvement opportunities for product design and process methodology, and will consider all aspects of the manufacturing process including manpower, methods, materials, machines, measurements, and the work environment
Analyzes yield and statistical process control data and provides corrective actions for issues that negatively impact the performance of the division
Prepares project plans and manages/executes the completion of those plans in a time-critical fashion
Manages and executes engineering project assignments relative to process capacity, process capability, cost reduction, process efficiency, technology advancement and customer support, and is ultimately responsible for ensuring the profitability of the division by these means
Duties and Responsibilities:
Programming implementation and initial setup of production equipment
Use of offline programming software to develop work instructions and machine programs including but not limited to: stencil design, solder paste inspection, surface mount pick and place, selective solder, wave solder, and AOI
Responsible for set up and maintenance of component package library
Carries out cost-effective design, installation, method of transfer, monitoring, and modification of manufacturing processes.
Analyzes yield and statistical process control data and provides corrective actions
Prepares project plans, manages/executes completion in time-critical manner
Establishes and maintains systems for determining whether a product, as designed, can be manufactured
Immediate technical support to production staff: Provide Real-time "tweaks" to production processes
Feedback to & coordination of issues & updates w/ Managers, Engineers and Supervisors
Provide technical support for SPC feedback and error proofing production processes
Perform and document 8D root cause / corrective action investigations
Ensure production department(s) are in compliance with ISO9001 and AS9100 standards
N ote:
The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.
Essential Knowledge and Skills:
Ability to interpret customer documentation (Blueprints, drawings, bills of material, specifications)
Solidworks or similar 3d modeling software;
Use of various software platforms for equipment set up for Thermal Profiling for Convection Reflow and Wave Solder, Valor Process Preparation for artwork conversation to machine formats for SMT programming and troubleshooting
Hands on skills for mechanical assembly; hardware installation, epoxy application
Use of basic hand tools and machine shop equipment
Cross-functional communication skills, partnering across engineering, quality, and operations
Education and Experience:
Education:
BS Engineering Degree (Mechanical/Electrical/Industrial/Manufacturing) or equivalent experience required
Experience with offline programming using Valor Process Prep is a plus
Experience with surface mount and solder process is a plus Stencil Design
Screen Printer and Solder Paste Inspection system Programming
Pick and Place Programming
Reflow Profiling
Preferred Experience:
Previous engineering experience within a PCBA environment
Working knowledge of Industry and Military Standards
#LI-PG1
Compensation and Benefits:
TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire.
Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations.
Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
About TTM
TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market.
Additional information can be found at www.ttm.com
Scope:
Responsible for direct technical support & defining the methodology by which printed circuit boards assemblies are manufactured efficiently and consistently in order to meet customer quality requirements
Applies common engineering principles to identify and quantify improvement opportunities for product design and process methodology, and will consider all aspects of the manufacturing process including manpower, methods, materials, machines, measurements, and the work environment
Analyzes yield and statistical process control data and provides corrective actions for issues that negatively impact the performance of the division
Prepares project plans and manages/executes the completion of those plans in a time-critical fashion
Manages and executes engineering project assignments relative to process capacity, process capability, cost reduction, process efficiency, technology advancement and customer support, and is ultimately responsible for ensuring the profitability of the division by these means
Duties and Responsibilities:
Programming implementation and initial setup of production equipment
Use of offline programming software to develop work instructions and machine programs including but not limited to: stencil design, solder paste inspection, surface mount pick and place, selective solder, wave solder, and AOI
Responsible for set up and maintenance of component package library
Carries out cost-effective design, installation, method of transfer, monitoring, and modification of manufacturing processes.
Analyzes yield and statistical process control data and provides corrective actions
Prepares project plans, manages/executes completion in time-critical manner
Establishes and maintains systems for determining whether a product, as designed, can be manufactured
Immediate technical support to production staff: Provide Real-time "tweaks" to production processes
Feedback to & coordination of issues & updates w/ Managers, Engineers and Supervisors
Provide technical support for SPC feedback and error proofing production processes
Perform and document 8D root cause / corrective action investigations
Ensure production department(s) are in compliance with ISO9001 and AS9100 standards
N ote:
The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.
Essential Knowledge and Skills:
Ability to interpret customer documentation (Blueprints, drawings, bills of material, specifications)
Solidworks or similar 3d modeling software;
Use of various software platforms for equipment set up for Thermal Profiling for Convection Reflow and Wave Solder, Valor Process Preparation for artwork conversation to machine formats for SMT programming and troubleshooting
Hands on skills for mechanical assembly; hardware installation, epoxy application
Use of basic hand tools and machine shop equipment
Cross-functional communication skills, partnering across engineering, quality, and operations
Education and Experience:
Education:
BS Engineering Degree (Mechanical/Electrical/Industrial/Manufacturing) or equivalent experience required
Experience with offline programming using Valor Process Prep is a plus
Experience with surface mount and solder process is a plus Stencil Design
Screen Printer and Solder Paste Inspection system Programming
Pick and Place Programming
Reflow Profiling
Preferred Experience:
Previous engineering experience within a PCBA environment
Working knowledge of Industry and Military Standards
#LI-PG1
Compensation and Benefits:
TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire.
Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations.
Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.