Abacus
Description:
The Development & Validation Engineer for Automatic Transmission, Driveline and/or Gear Reducers is responsible for designing, developing, and validating components and systems. Work closely with other engineer groups interacting with the transmission, including - but not limited to - transmission & Driveline hardware, software, calibration, thermal management, engine engineering organizations. The D&V Test Engineer is also responsible for test execution to ensure functional objectives and durability goals are met. This includes, test planning, Bill-of-material development, test cell setup and debug, test schedule development, root cause analysis of test stoppages throughout the test and finally to lead the test article inspection and report following the end of each test. The engineer will initiate root cause analysis and solution development process in the case of test failures are identified.
Requirements:
B.S. Mechanical, Aero, Electrical or equivalent Engineering Degree At least 1-3 years of engineering experience in Automatic Transmission/Driveline/Gear Reducer design, development, calibration or controls Must have excellent communication and presentation skills as well as experience with basic PC software (e.g. MS Word, Excel, PowerPoint and Project) Candidate must be highly motivated, self-directed, have the ability to manage multiple complex projects, and have a positive attitude. Preferred Qualifications: Preferred candidates will hold a Master's degree in Engineering and/or have experience in transmission design, development, and testing
Specific experience with software, calibration, transmission efficiency and/or thermal management is desired An understanding of transmission operation and the interaction between gears, clutches, and electrohydraulic components is desired Experience with transmission, driveline and/or gear reducer testing procedures, in vehicle or on dynamometer, and other related considerations are also highly valued
Additional Infromation / Must Have's:
1. B.S. Mechanical, Aero, Electrical or equivalent Engineering Degree
2. 1-3 years of engineering experience in Automatic Transmission/Driveline/Gear Reducer design, development, calibration or controls
3. Must be highly motivated, self-directed and have the ability to manage multiple complex projects, excellent communication and presentation skills as well as experience with basic PC software (e.g. MS Word, Excel, PowerPoint and Project). • How many years of experience are you looking for (if different than the job description): 1-3 years
100% Onsite at CTC with some travel to Client for vehicle testing.
Does this position require driving a Stellantis vehicle? (Examples: Testing / Driving on a Track / Moving vehicle throughout the facility/ Moving vehicle to another plant location)
-
Yes Testing / Driving on a Track and public roads, Moving vehicle throughout the facility.
Amount of travel, (if so, where): Some travel to Client for vehicle testing.
Custom Fields PentaSAP Cost Center (Or n/a if WBS): 12507570 Driving Required: Yes Resource Type: Supplemental Client Card Needed: Travel Percentage: 0-20 Work Schedule Hours Per Day:8.00 Hours Per Week:40.00 Start Time: End Time: Overtime Required:No Work Location Address:800 Chrysler Dr. City:Auburn Hills State:Michigan Country:United States Postal Code:48326
Requirements:
B.S. Mechanical, Aero, Electrical or equivalent Engineering Degree At least 1-3 years of engineering experience in Automatic Transmission/Driveline/Gear Reducer design, development, calibration or controls Must have excellent communication and presentation skills as well as experience with basic PC software (e.g. MS Word, Excel, PowerPoint and Project) Candidate must be highly motivated, self-directed, have the ability to manage multiple complex projects, and have a positive attitude. Preferred Qualifications: Preferred candidates will hold a Master's degree in Engineering and/or have experience in transmission design, development, and testing
Specific experience with software, calibration, transmission efficiency and/or thermal management is desired An understanding of transmission operation and the interaction between gears, clutches, and electrohydraulic components is desired Experience with transmission, driveline and/or gear reducer testing procedures, in vehicle or on dynamometer, and other related considerations are also highly valued
Additional Infromation / Must Have's:
1. B.S. Mechanical, Aero, Electrical or equivalent Engineering Degree
2. 1-3 years of engineering experience in Automatic Transmission/Driveline/Gear Reducer design, development, calibration or controls
3. Must be highly motivated, self-directed and have the ability to manage multiple complex projects, excellent communication and presentation skills as well as experience with basic PC software (e.g. MS Word, Excel, PowerPoint and Project). • How many years of experience are you looking for (if different than the job description): 1-3 years
100% Onsite at CTC with some travel to Client for vehicle testing.
Does this position require driving a Stellantis vehicle? (Examples: Testing / Driving on a Track / Moving vehicle throughout the facility/ Moving vehicle to another plant location)
-
Yes Testing / Driving on a Track and public roads, Moving vehicle throughout the facility.
Amount of travel, (if so, where): Some travel to Client for vehicle testing.
Custom Fields PentaSAP Cost Center (Or n/a if WBS): 12507570 Driving Required: Yes Resource Type: Supplemental Client Card Needed: Travel Percentage: 0-20 Work Schedule Hours Per Day:8.00 Hours Per Week:40.00 Start Time: End Time: Overtime Required:No Work Location Address:800 Chrysler Dr. City:Auburn Hills State:Michigan Country:United States Postal Code:48326