LAUNCH Technical Workforce Solutions
OVERVIEW
COMPANY NAME:
Gulfstream
JOB TITLE:
Final Line Mech I & II
SITE LOCATION:
Savannah, GA
# OF OPENINGS:
1
START DATES:
Every Monday, must clear Tuesday prior
COMPENSATION / SCHEDULE
Weekly Pay (on 40 hours) / PACKAGE RATE:
LOCAL
ST:
I - 25.66
II - 28.75
OT:
I - 38.49
II - 43.13
PD:
LOCAL
TRAINING: N/A
BONUS:
N/A
WORK SCHEDULE:
4 x 10s, day & nights, MUST be flexible.
5:00AM - 3:00PM
Overtime : N/A
MINIMUM REQUIREMENTS FOR CONSIDERATION
Will be required to take a Talogy assessment upon submission + must pass or wait 6 months to try again **
High School Diploma or GED required.
Must be able to fit/comfortable in confined spaces
1 year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc. A&P license may offset the one year of experience required.
Solumina and Smarteam experience preferred.
Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job.
Ability to perform work such as basic drilling, reaming, ship fitting parts, etc.
Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs.
Employee Value Proposition –
Lots of opportunity for long term contract or moving direct!
Week 1 – Responsibilities / Expectations / Culture / Environment
JOB DESCRIPTION – FORMATTED TO BE SHARABLE
Reason: Replacements
Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems
Principle Duties and Responsibilities:
Assemble, install, and adjust aircraft structure parts and system components.
Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements.
Perform necessary rework to ensure installations meet conformity.
Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
Update and sign required logs and records as required.
Check own work to ensure a defect free installation prior to final inspection.
Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
Demonstrate Gulfstream Manufacturing competencies in the employee effectiveness review.
Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
Support continuous improvement processes as assigned.
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
________________________________________________________________
Please attach questionnaire after resume combined into ONE document with Workspend logo only, must be vendor neutral– RTR will be sent by me as an Able form
Name:
Email:
Phone:
DOB:
Last 3 SSN:
Perm resident city/state:
Level of education attained
COMPANY NAME:
Gulfstream
JOB TITLE:
Final Line Mech I & II
SITE LOCATION:
Savannah, GA
# OF OPENINGS:
1
START DATES:
Every Monday, must clear Tuesday prior
COMPENSATION / SCHEDULE
Weekly Pay (on 40 hours) / PACKAGE RATE:
LOCAL
ST:
I - 25.66
II - 28.75
OT:
I - 38.49
II - 43.13
PD:
LOCAL
TRAINING: N/A
BONUS:
N/A
WORK SCHEDULE:
4 x 10s, day & nights, MUST be flexible.
5:00AM - 3:00PM
Overtime : N/A
MINIMUM REQUIREMENTS FOR CONSIDERATION
Will be required to take a Talogy assessment upon submission + must pass or wait 6 months to try again **
High School Diploma or GED required.
Must be able to fit/comfortable in confined spaces
1 year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc. A&P license may offset the one year of experience required.
Solumina and Smarteam experience preferred.
Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job.
Ability to perform work such as basic drilling, reaming, ship fitting parts, etc.
Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs.
Employee Value Proposition –
Lots of opportunity for long term contract or moving direct!
Week 1 – Responsibilities / Expectations / Culture / Environment
JOB DESCRIPTION – FORMATTED TO BE SHARABLE
Reason: Replacements
Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems
Principle Duties and Responsibilities:
Assemble, install, and adjust aircraft structure parts and system components.
Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements.
Perform necessary rework to ensure installations meet conformity.
Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
Update and sign required logs and records as required.
Check own work to ensure a defect free installation prior to final inspection.
Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
Demonstrate Gulfstream Manufacturing competencies in the employee effectiveness review.
Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
Support continuous improvement processes as assigned.
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
________________________________________________________________
Please attach questionnaire after resume combined into ONE document with Workspend logo only, must be vendor neutral– RTR will be sent by me as an Able form
Name:
Email:
Phone:
DOB:
Last 3 SSN:
Perm resident city/state:
Level of education attained