WSP in the U.S.
Senior Instrumentation and Controls (I&C) Engineer
WSP in the U.S., Salt Lake City, Utah, United States, 84193
Overview
Senior Instrumentation and Controls (I&C) Engineer Join to apply for the Senior Instrumentation and Controls (I&C) Engineer role at WSP in the U.S. JOB DESCRIPTION: WSP is not just a place to work, it is a promise of a living, dynamic environment where people collaborate, innovate, build enduring relationships, excel, and grow professionally in a strong culture. Role Overview: Our team is seeking an energetic and responsive Senior Instrumentation and Controls (I&C) Engineer for our multidisciplinary Process Infrastructure and Design team based in Tempe, Arizona, South Jordan, Utah or Houston, Texas on a full-time basis. The team will work with a diverse set of global clients and projects in Environmental Infrastructure facilities, Oil & Gas, surface and underground mine infrastructure including dewatering, material handling, fuel and lube, maintenance shops, pumping stations, industrial facilities, water and wastewater industries, landfills and contaminated soils sites. Location: Depending on candidate preference, this individual can work in our Tempe, AZ, South Jordan, UT or Houston, TX offices. Responsibilities
Develop a variety of I&C design documents such as design drawings, technical specifications, and design basis calculations with a high level of competence and minimal oversight. Demonstrate clear and prompt communication and foster leadership. Work independently and collaborate in cross-discipline teams to meet project goals. Ensure compliance with codes and standards, governing regulations, industry practices, and internal procedures. Develop and perform quality reviews for detailed engineering documents and technical specifications. Mentor junior team members in technical excellence and career growth. Review instrument and control systems vendor drawings and interface with suppliers, clients, and other engineering disciplines, detailers/designers. Participate in the development and design review of P&IDs. Prepare and review control deliverables such as control narratives, cause and effect diagrams, system architecture diagrams, instrument location layouts, installation details, wiring and interconnection diagrams, PLC layouts, and loop drawings. Prepare and review instrument datasheets, I/O lists, instrument index, instrument selection, and hazardous area classification. Provide configuration of and develop programming for controls equipment, including PLCs, HMIs, DCS Systems, SCADA, etc. Participate in client and project review meetings and prepare technical bid evaluations; attend FAT. Collaborate with project management and engineering disciplines to develop project budgets, schedules, scoping documents, design criteria, and list of project deliverables. Promote engineering professionalism and maintain positive relationships internally and externally. Qualifications
Required Qualifications
Bachelor of Science Degree in Electrical Engineering (or related field) from ABET accredited program. 5 - 7+ years of relevant experience. Advanced knowledge of Instrumentation Engineering. Advanced knowledge of design standards such as API, NFPA, ISA, PIP, IEC, IEEE, ISO, NACE, NESC. Strong written and verbal communication and people management skills. Proficient in SPI (Intools), AutoCAD, and other instrumentation design tools. Strong understanding of control systems (PLC, DCS) and industrial networking protocols. Demonstrate advanced ability to work with others in supplying information and seeking assistance as necessary. A team player attitude and the ability to work on multiple projects. Must pass background check. Desired Qualifications
Professional Engineer (PE) registration, or the ability to secure within twelve (12) months of hire is a plus. Master of Science Degree in Electrical Engineering (or related field) from ABET accredited program. Up-to-date NCEES record. Design-Build project execution experience. Lead the design and specification of field instrumentation, control valves, and analyzers for oil & gas, mining, heavy industries, water industries and process facilities. AutoCAD, Revit, and other design program competence. About WSP
WSP USA is the U.S. operating company of WSP, one of the world's leading engineering and professional services firms. We are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper. WSP provides a flexible and agile workplace model while meeting client needs. Employees are also afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings focused on providing health and financial stability throughout the employees career. At WSP, we want to give our employees the challenges they seek to grow their careers and knowledge base. Your daily contributions to your team will be essential in meeting client objectives, goals and challenges. Are you ready to get started? WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status. The selected candidate must be authorized to work in the United States. Notice To Third Party Agencies
WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to WSP in the absence of a signed Service Agreement where WSP has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service. #J-18808-Ljbffr
Senior Instrumentation and Controls (I&C) Engineer Join to apply for the Senior Instrumentation and Controls (I&C) Engineer role at WSP in the U.S. JOB DESCRIPTION: WSP is not just a place to work, it is a promise of a living, dynamic environment where people collaborate, innovate, build enduring relationships, excel, and grow professionally in a strong culture. Role Overview: Our team is seeking an energetic and responsive Senior Instrumentation and Controls (I&C) Engineer for our multidisciplinary Process Infrastructure and Design team based in Tempe, Arizona, South Jordan, Utah or Houston, Texas on a full-time basis. The team will work with a diverse set of global clients and projects in Environmental Infrastructure facilities, Oil & Gas, surface and underground mine infrastructure including dewatering, material handling, fuel and lube, maintenance shops, pumping stations, industrial facilities, water and wastewater industries, landfills and contaminated soils sites. Location: Depending on candidate preference, this individual can work in our Tempe, AZ, South Jordan, UT or Houston, TX offices. Responsibilities
Develop a variety of I&C design documents such as design drawings, technical specifications, and design basis calculations with a high level of competence and minimal oversight. Demonstrate clear and prompt communication and foster leadership. Work independently and collaborate in cross-discipline teams to meet project goals. Ensure compliance with codes and standards, governing regulations, industry practices, and internal procedures. Develop and perform quality reviews for detailed engineering documents and technical specifications. Mentor junior team members in technical excellence and career growth. Review instrument and control systems vendor drawings and interface with suppliers, clients, and other engineering disciplines, detailers/designers. Participate in the development and design review of P&IDs. Prepare and review control deliverables such as control narratives, cause and effect diagrams, system architecture diagrams, instrument location layouts, installation details, wiring and interconnection diagrams, PLC layouts, and loop drawings. Prepare and review instrument datasheets, I/O lists, instrument index, instrument selection, and hazardous area classification. Provide configuration of and develop programming for controls equipment, including PLCs, HMIs, DCS Systems, SCADA, etc. Participate in client and project review meetings and prepare technical bid evaluations; attend FAT. Collaborate with project management and engineering disciplines to develop project budgets, schedules, scoping documents, design criteria, and list of project deliverables. Promote engineering professionalism and maintain positive relationships internally and externally. Qualifications
Required Qualifications
Bachelor of Science Degree in Electrical Engineering (or related field) from ABET accredited program. 5 - 7+ years of relevant experience. Advanced knowledge of Instrumentation Engineering. Advanced knowledge of design standards such as API, NFPA, ISA, PIP, IEC, IEEE, ISO, NACE, NESC. Strong written and verbal communication and people management skills. Proficient in SPI (Intools), AutoCAD, and other instrumentation design tools. Strong understanding of control systems (PLC, DCS) and industrial networking protocols. Demonstrate advanced ability to work with others in supplying information and seeking assistance as necessary. A team player attitude and the ability to work on multiple projects. Must pass background check. Desired Qualifications
Professional Engineer (PE) registration, or the ability to secure within twelve (12) months of hire is a plus. Master of Science Degree in Electrical Engineering (or related field) from ABET accredited program. Up-to-date NCEES record. Design-Build project execution experience. Lead the design and specification of field instrumentation, control valves, and analyzers for oil & gas, mining, heavy industries, water industries and process facilities. AutoCAD, Revit, and other design program competence. About WSP
WSP USA is the U.S. operating company of WSP, one of the world's leading engineering and professional services firms. We are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper. WSP provides a flexible and agile workplace model while meeting client needs. Employees are also afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings focused on providing health and financial stability throughout the employees career. At WSP, we want to give our employees the challenges they seek to grow their careers and knowledge base. Your daily contributions to your team will be essential in meeting client objectives, goals and challenges. Are you ready to get started? WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status. The selected candidate must be authorized to work in the United States. Notice To Third Party Agencies
WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to WSP in the absence of a signed Service Agreement where WSP has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service. #J-18808-Ljbffr