Cushman & Wakefield
Overview
Mobile Operating Engineer role at
Cushman & Wakefield . Responsible to ensure the efficient operation and maintenance of HVAC, mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include maintaining a clean and safe working environment, performing rounds, conducting routine assessments, day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties. Responsibilities
Perform all plumbing, electrical, or HVAC requirements of the building(s). Maintain heating equipment, up to and including chillers (air and/or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings. Verify field conditions and perform any necessary repairs or adjustments. Monitor energy management. Repair doors, ceilings, hand rails, floors and other general repairs, adjustments and installations about the property. Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.). Perform preventive maintenance in accordance with Cushman & Wakefield standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing bearings, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, signage; maintain rooms clear of obstructions and debris. Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, Cushman & Wakefield standards, building protocol and as directed by superiors and property management. Document and report activities to supervisor. Respond immediately to emergency situations (fire, evacuation, equipment failure) and customer concerns. Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits. Complete all required Cushman & Wakefield Safety Training as scheduled annually. Comply with Cushman & Wakefield Uniform Dress Code while on the property and maintain a neat and clean appearance. Key Competencies
Technical Proficiency Initiative Flexibility Multi-Tasking Sense of Urgency Education
High School Diploma or GED equivalent Graduate of apprentice program or trade school preferred Experience
5+ years of related work experience in operating HVAC, plumbing, mechanical systems in a commercial property setting Additional Eligibility Qualifications
Appropriate license/permit for trade as may be required, e.g., Journeyman or Master Electrician License or City Licenses (such as Refrigeration Certificate of Fitness, High-Pressure Boiler License, High-Pressure Steam Operator). May be required to have certification as a Universal Technician for CFCs depending on market licensure requirements. Possess and maintain a valid driver’s license and good driving record (where applicable). Basic computing skills in Outlook, Excel & Word. Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. Knowledgeable in energy management systems, techniques and operations. Thorough knowledge in all building systems operations, maintenance and repair. May be the only maintenance staff member on duty during certain shifts; may be required to work extended periods without relief when responding to priority/emergency situations; may require shift work and/or on-call duties. Work Environment
This job operates in a professional office environment. Regular travel between properties in varying weather conditions. Physical Demands
Stooping, standing, climbing; frequently lift a minimum of 50 lbs of equipment (pumps, tools, ladders) and safely install rigging/lifting devices. Regularly crouch and reach to install/move equipment by bending forward at the waist. Move between departments, floors, and properties to facilitate work. Speak clearly; read and understand information presented orally and in writing. Vision abilities to read printed material, drawings, and schematics. AAP/EEO STATEMENT: Cushman & Wakefield provides equal employment opportunity to all individuals regardless of race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by law. Discrimination of any type will not be tolerated. Other Duties
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities. Other duties, responsibilities and activities may be assigned at any time with or without notice. Compensation
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $31.00 - $35.00.
#J-18808-Ljbffr
Mobile Operating Engineer role at
Cushman & Wakefield . Responsible to ensure the efficient operation and maintenance of HVAC, mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include maintaining a clean and safe working environment, performing rounds, conducting routine assessments, day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties. Responsibilities
Perform all plumbing, electrical, or HVAC requirements of the building(s). Maintain heating equipment, up to and including chillers (air and/or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings. Verify field conditions and perform any necessary repairs or adjustments. Monitor energy management. Repair doors, ceilings, hand rails, floors and other general repairs, adjustments and installations about the property. Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.). Perform preventive maintenance in accordance with Cushman & Wakefield standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing bearings, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, signage; maintain rooms clear of obstructions and debris. Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, Cushman & Wakefield standards, building protocol and as directed by superiors and property management. Document and report activities to supervisor. Respond immediately to emergency situations (fire, evacuation, equipment failure) and customer concerns. Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits. Complete all required Cushman & Wakefield Safety Training as scheduled annually. Comply with Cushman & Wakefield Uniform Dress Code while on the property and maintain a neat and clean appearance. Key Competencies
Technical Proficiency Initiative Flexibility Multi-Tasking Sense of Urgency Education
High School Diploma or GED equivalent Graduate of apprentice program or trade school preferred Experience
5+ years of related work experience in operating HVAC, plumbing, mechanical systems in a commercial property setting Additional Eligibility Qualifications
Appropriate license/permit for trade as may be required, e.g., Journeyman or Master Electrician License or City Licenses (such as Refrigeration Certificate of Fitness, High-Pressure Boiler License, High-Pressure Steam Operator). May be required to have certification as a Universal Technician for CFCs depending on market licensure requirements. Possess and maintain a valid driver’s license and good driving record (where applicable). Basic computing skills in Outlook, Excel & Word. Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. Knowledgeable in energy management systems, techniques and operations. Thorough knowledge in all building systems operations, maintenance and repair. May be the only maintenance staff member on duty during certain shifts; may be required to work extended periods without relief when responding to priority/emergency situations; may require shift work and/or on-call duties. Work Environment
This job operates in a professional office environment. Regular travel between properties in varying weather conditions. Physical Demands
Stooping, standing, climbing; frequently lift a minimum of 50 lbs of equipment (pumps, tools, ladders) and safely install rigging/lifting devices. Regularly crouch and reach to install/move equipment by bending forward at the waist. Move between departments, floors, and properties to facilitate work. Speak clearly; read and understand information presented orally and in writing. Vision abilities to read printed material, drawings, and schematics. AAP/EEO STATEMENT: Cushman & Wakefield provides equal employment opportunity to all individuals regardless of race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by law. Discrimination of any type will not be tolerated. Other Duties
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities. Other duties, responsibilities and activities may be assigned at any time with or without notice. Compensation
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $31.00 - $35.00.
#J-18808-Ljbffr