Monogram Foods
Join to apply for the
Engineer, Continuous Improvement
role at
Monogram Foods Join to apply for the
Engineer, Continuous Improvement
role at
Monogram Foods Direct message the job poster from Monogram Foods Manager, Organizational Development – Talent Resourcing
Position Overview
The Continuous Improvement Engineer (CIE) is responsible for engaging, executing and delivering cost reduction, quality improvement and cycle time reduction in the areas of line performance, yields, defect, waste reduction and other opportunities. They utilize DMAIC Six-Sigma technologies, approaches, tools to isolate causes of variation and then work to apply variation and other waste reduction solutions that deliver financial and other established results.
Responsibilities include but may not be limited to the following:
Investigate, experiment and implement processes to maximize productivity Provide tactical coaching on Lean Methodology and Continuous Improvement Techniques (Six Sigma) Provides manufacturing with packaging and technical engineering support to implement new products and processes into production Create and maintain an environment of continuous improvement by actively managing projects to improve overall quality Continuously challenges the status quo understood as a day-to-day activity in the section / business unit Proactive problem solving on the basis statistical analysis of corrective actions / assigned by Manufacturing Manager, QA, EHS projects Implementation of technical, technological developments based on proactive problem solving - assigned by Manufacturing Manager, QA, EHS projects Acting according to the EHS agreement guidelines Selection and development of tools and fixtures for improvements Detailed technical specifications with EHS, ABS and quality aspects for tools and fixtures
NOTE: This list presents only the principal duties of the position and is not intended to be comprehensive. The duties and responsibilities listed above may be changed or supplemented at any time in accordance with business needs and conditions
The Ideal Candidate Will Have The Following
Education and Experience:
Lean Deployment experience is a plus Bachelor’s Degree in Supply Chain/Logistics, Operations, Business Management, Mechanical or Industrial Engineering and Food Science preferred Union labor management is a plus SAP experience and user knowledge preferred, but not required Experience in Lean Six Sigma, TPM and/or 5S is a plus Candidates with fluency in both Spanish and English are highly preferred Must be over 18 Years old
Competencies And Skills
Strong verbal and written communication skills. Ability to deal with internal and external customers and provide positive solutions. Proficient with a variety of computer applications such as MS Word, MS Excel, and specialized software designed to facilitate the tracking of raw materials, finished goods and inventory. Hands-on experience preparing financial spreadsheets and extracting data from databases to prepare reports for analysis. Must have strong interpersonal skills to support all inter-related functions with strong customer service techniques, practices and principles. Strong ability to plan and organize work to meet changing priorities and deadlines. Must be able to effectively perform multiple, concurrent tasks with constant interruptions. Experience working in plant environment preferred Advanced user of Excel preferred Demonstrated ability to read, write and perform mathematical calculations at an intermediate level
Physical Demands
The physical requirements listed in this section include, but are not limited, to the motor/physical abilities and skills require of position in order to successfully undertake the essential duties and responsibilities of this position. In accordance with the Americans with Disabilities Act (ADA), reasonable accommodations may be made to empower individuals with disabilities to undertake the essential duties and responsibilities of the position. While performing the duties of this job, the employee is regularly required to walk, sit, stand ; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear 8-9 hours per day. The employee must regularly lift and/or move up to 5 lbs., and occasionally lift and/or move more than 40 lbs. Must be able to sit for up to 8-9 hours per day. Use keyboard, mouse, visually see, and look at computer monitors up to 8-9 hours per day.
NOTE: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Seniority level
Seniority level Associate Employment type
Employment type Full-time Job function
Job function Manufacturing, Engineering, and Project Management Industries Food and Beverage Manufacturing and Manufacturing Referrals increase your chances of interviewing at Monogram Foods by 2x Inferred from the description for this job
Medical insurance Vision insurance 401(k) Paid maternity leave Get notified about new Continuous Improvement Engineer jobs in
Wilmington, MA . Senior Quality Engineer (including machined parts)
Acton, MA $89,000.00-$101,000.00 4 days ago Cambridge, MA $76,000.00-$105,000.00 4 days ago Westford, MA $90,000.00-$120,000.00 1 week ago Continuous Improvement Engineer - Packaging Manufacturer
Marlborough, MA $75,000.00-$90,000.00 2 weeks ago Ipswich, MA $130,000.00-$150,000.00 1 month ago Bedford, MA $80,000.00-$110,000.00 2 weeks ago Andover, MA $82,000.00-$164,000.00 4 days ago Watertown, MA $99,500.00-$144,500.00 1 month ago Marlborough, MA $75,000.00-$80,000.00 2 weeks ago Entry Level Industrial Engineer, application via RippleMatch
Andover, MA $101,000.00-$203,000.00 4 days ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr
Engineer, Continuous Improvement
role at
Monogram Foods Join to apply for the
Engineer, Continuous Improvement
role at
Monogram Foods Direct message the job poster from Monogram Foods Manager, Organizational Development – Talent Resourcing
Position Overview
The Continuous Improvement Engineer (CIE) is responsible for engaging, executing and delivering cost reduction, quality improvement and cycle time reduction in the areas of line performance, yields, defect, waste reduction and other opportunities. They utilize DMAIC Six-Sigma technologies, approaches, tools to isolate causes of variation and then work to apply variation and other waste reduction solutions that deliver financial and other established results.
Responsibilities include but may not be limited to the following:
Investigate, experiment and implement processes to maximize productivity Provide tactical coaching on Lean Methodology and Continuous Improvement Techniques (Six Sigma) Provides manufacturing with packaging and technical engineering support to implement new products and processes into production Create and maintain an environment of continuous improvement by actively managing projects to improve overall quality Continuously challenges the status quo understood as a day-to-day activity in the section / business unit Proactive problem solving on the basis statistical analysis of corrective actions / assigned by Manufacturing Manager, QA, EHS projects Implementation of technical, technological developments based on proactive problem solving - assigned by Manufacturing Manager, QA, EHS projects Acting according to the EHS agreement guidelines Selection and development of tools and fixtures for improvements Detailed technical specifications with EHS, ABS and quality aspects for tools and fixtures
NOTE: This list presents only the principal duties of the position and is not intended to be comprehensive. The duties and responsibilities listed above may be changed or supplemented at any time in accordance with business needs and conditions
The Ideal Candidate Will Have The Following
Education and Experience:
Lean Deployment experience is a plus Bachelor’s Degree in Supply Chain/Logistics, Operations, Business Management, Mechanical or Industrial Engineering and Food Science preferred Union labor management is a plus SAP experience and user knowledge preferred, but not required Experience in Lean Six Sigma, TPM and/or 5S is a plus Candidates with fluency in both Spanish and English are highly preferred Must be over 18 Years old
Competencies And Skills
Strong verbal and written communication skills. Ability to deal with internal and external customers and provide positive solutions. Proficient with a variety of computer applications such as MS Word, MS Excel, and specialized software designed to facilitate the tracking of raw materials, finished goods and inventory. Hands-on experience preparing financial spreadsheets and extracting data from databases to prepare reports for analysis. Must have strong interpersonal skills to support all inter-related functions with strong customer service techniques, practices and principles. Strong ability to plan and organize work to meet changing priorities and deadlines. Must be able to effectively perform multiple, concurrent tasks with constant interruptions. Experience working in plant environment preferred Advanced user of Excel preferred Demonstrated ability to read, write and perform mathematical calculations at an intermediate level
Physical Demands
The physical requirements listed in this section include, but are not limited, to the motor/physical abilities and skills require of position in order to successfully undertake the essential duties and responsibilities of this position. In accordance with the Americans with Disabilities Act (ADA), reasonable accommodations may be made to empower individuals with disabilities to undertake the essential duties and responsibilities of the position. While performing the duties of this job, the employee is regularly required to walk, sit, stand ; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear 8-9 hours per day. The employee must regularly lift and/or move up to 5 lbs., and occasionally lift and/or move more than 40 lbs. Must be able to sit for up to 8-9 hours per day. Use keyboard, mouse, visually see, and look at computer monitors up to 8-9 hours per day.
NOTE: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Seniority level
Seniority level Associate Employment type
Employment type Full-time Job function
Job function Manufacturing, Engineering, and Project Management Industries Food and Beverage Manufacturing and Manufacturing Referrals increase your chances of interviewing at Monogram Foods by 2x Inferred from the description for this job
Medical insurance Vision insurance 401(k) Paid maternity leave Get notified about new Continuous Improvement Engineer jobs in
Wilmington, MA . Senior Quality Engineer (including machined parts)
Acton, MA $89,000.00-$101,000.00 4 days ago Cambridge, MA $76,000.00-$105,000.00 4 days ago Westford, MA $90,000.00-$120,000.00 1 week ago Continuous Improvement Engineer - Packaging Manufacturer
Marlborough, MA $75,000.00-$90,000.00 2 weeks ago Ipswich, MA $130,000.00-$150,000.00 1 month ago Bedford, MA $80,000.00-$110,000.00 2 weeks ago Andover, MA $82,000.00-$164,000.00 4 days ago Watertown, MA $99,500.00-$144,500.00 1 month ago Marlborough, MA $75,000.00-$80,000.00 2 weeks ago Entry Level Industrial Engineer, application via RippleMatch
Andover, MA $101,000.00-$203,000.00 4 days ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr