Empirical Systems Aerospace, Inc
Manufacturing Engineer
Empirical Systems Aerospace, Inc, San Luis Obispo, California, us, 93403
MANUFACTURING ENGINEER
The Manufacturing Engineer will provide critical engineering support to ensure efficient, high-quality production of the company’s products. This role partners closely with design, procurement, quality assurance, and assembly teams to translate engineered designs into manufacturable assemblies, optimize production processes, and support new product development. The Manufacturing Engineer will define assembly documentation, establish work instructions, develop and improve manufacturing processes, and help train personnel to ensure consistent quality, safety, and efficiency.
Essential Duties and Responsibilities
Primary responsibility is to provide engineering support the company's manufacturing
Develop and maintain assembly documentation to maintain high quality standards in our products
As a member of the “Integrated Product Team”, represent manufacturing interests.
Work with design engineers to partition new products into assemblies which can effectively be built with minimum variation by assembly personnel
Work with IPT to ensure that “Design for Manufacture” principals and methods are utilized in the design of new products
Work with procurement and quality assurance to qualify new suppliers
Work with assembly, test, and engineering personnel to build prototype units and ensure that the documentation accurately reflects the “as built” condition
Define and revise assembly and test routings for work orders
Act as engineering interface to resolve manufacturing problems on the assembly floor
Help train assembly personnel in proper use of tools, equipment, and assembly techniques
Make improvements throughout the assembly process which will reduce cost, reduce variation, or improve reliability
Make sure that assembly processes clearly identify any potential safety hazards, and design processes and fixtures which will minimize safety risks
Help define/develop assembly aids/fixtures to increase efficiency and quality
Required Qualifications and Skills
Bachelor Degree in Manufacturing or Mechanical Engineering
This position requires a minimum of 2-5+ years of experience in manufacturing engineering.
Hands-on experience in a manufacturing environment is necessary.
Ability to extract manufacturing information from a computerized inventory control system
Knowledge of transitioning prototypes into production builds
Must be able to work in a small, effective manufacturing team
Knowledge to translate an engineered design into build instructions which can be used by assembly and test personnel to duplicate the required product performance
Ability to determine cost effective and reliable means of assembly in an electronics environment
Take responsibility for establishing and maintaining assembly documentation
Ability to comprehend specification sheets
Familiarity with windows based personal computers
Must be able to work with a minimum of supervision
Desired Qualifications and Skills
Additional experience working with new product developments.
Familiarity with electronics manufacturing.
Specific experience with sheet metal fabrication, plastics, and printed circuit board manufacture.
Knowledge of computerized MRP/ERP systems, an understanding of inventory control methods and production control techniques.
Experience with supplier management and procurement (such as SOWs, RFPs, and/or vendor management)
Knowledge of Lean Principles
Comprehensive Benefits & Perks
Health & Wellness: Choose from three health, dental, and vision plans - including a 100% employer-paid option covering both employees and their families.
Paid Time Off: Enjoy 120 hours of PTO, 80 hours accrued plus an additional 40 hours of holiday break pay in addition to Christmas Eve, Christmas Day, and New Year’s Day off.
Life Insurance: $25,000 employer-paid life insurance policy, with the option to purchase additional coverage for employees and their families.
Supplemental Coverage: Access optional benefits such as Critical Illness, Hospital Indemnity, Accident Insurance, and Critical Illness with Skin Cancer coverage.
Health Savings Account (HSA): Take advantage of a tax-advantaged HSA to manage medical expenses.
Retirement Savings: 401(k) with a company match to support your financial future.
Paid Holidays: Enjoy 9 paid holidays throughout the year.
Work Environment: A casual dress code, complimentary snacks, and a welcoming company culture.
Ideal Location: Work in an area that offers an outstanding quality of life - a perfect place to live, work, and play!
Company Overview Empirical Systems Aerospace, Inc (ESAero) is a leader in aerospace engineering, product development, and manufacturing, dedicated to delivering high-quality, innovative, and cost-effective solutions to the industry. We specialize in cutting-edge system design, rapid product development, precision manufacturing, comprehensive testing, and technology demonstrations to support the evolving needs of the aerospace community. Committed to excellence, on-time delivery, and continuous growth, we invest in infrastructure to expand our manufacturing and aftermarket capabilities while maintaining the highest standards of engineering services.
At ESAero, we don’t just build products, we engineer solutions that propel the
aerospace industry forward.
This position is fully on-site at ESAero in San Luis Obispo, CA
___________________________________________________________________________
ESAero is an equal opportunity employer. E-Verify participation required for employment. Must present proof of authorization to work in the United States. Must be able to pass background check. Hiring Range: $80k-120k(DOE)
#J-18808-Ljbffr
Essential Duties and Responsibilities
Primary responsibility is to provide engineering support the company's manufacturing
Develop and maintain assembly documentation to maintain high quality standards in our products
As a member of the “Integrated Product Team”, represent manufacturing interests.
Work with design engineers to partition new products into assemblies which can effectively be built with minimum variation by assembly personnel
Work with IPT to ensure that “Design for Manufacture” principals and methods are utilized in the design of new products
Work with procurement and quality assurance to qualify new suppliers
Work with assembly, test, and engineering personnel to build prototype units and ensure that the documentation accurately reflects the “as built” condition
Define and revise assembly and test routings for work orders
Act as engineering interface to resolve manufacturing problems on the assembly floor
Help train assembly personnel in proper use of tools, equipment, and assembly techniques
Make improvements throughout the assembly process which will reduce cost, reduce variation, or improve reliability
Make sure that assembly processes clearly identify any potential safety hazards, and design processes and fixtures which will minimize safety risks
Help define/develop assembly aids/fixtures to increase efficiency and quality
Required Qualifications and Skills
Bachelor Degree in Manufacturing or Mechanical Engineering
This position requires a minimum of 2-5+ years of experience in manufacturing engineering.
Hands-on experience in a manufacturing environment is necessary.
Ability to extract manufacturing information from a computerized inventory control system
Knowledge of transitioning prototypes into production builds
Must be able to work in a small, effective manufacturing team
Knowledge to translate an engineered design into build instructions which can be used by assembly and test personnel to duplicate the required product performance
Ability to determine cost effective and reliable means of assembly in an electronics environment
Take responsibility for establishing and maintaining assembly documentation
Ability to comprehend specification sheets
Familiarity with windows based personal computers
Must be able to work with a minimum of supervision
Desired Qualifications and Skills
Additional experience working with new product developments.
Familiarity with electronics manufacturing.
Specific experience with sheet metal fabrication, plastics, and printed circuit board manufacture.
Knowledge of computerized MRP/ERP systems, an understanding of inventory control methods and production control techniques.
Experience with supplier management and procurement (such as SOWs, RFPs, and/or vendor management)
Knowledge of Lean Principles
Comprehensive Benefits & Perks
Health & Wellness: Choose from three health, dental, and vision plans - including a 100% employer-paid option covering both employees and their families.
Paid Time Off: Enjoy 120 hours of PTO, 80 hours accrued plus an additional 40 hours of holiday break pay in addition to Christmas Eve, Christmas Day, and New Year’s Day off.
Life Insurance: $25,000 employer-paid life insurance policy, with the option to purchase additional coverage for employees and their families.
Supplemental Coverage: Access optional benefits such as Critical Illness, Hospital Indemnity, Accident Insurance, and Critical Illness with Skin Cancer coverage.
Health Savings Account (HSA): Take advantage of a tax-advantaged HSA to manage medical expenses.
Retirement Savings: 401(k) with a company match to support your financial future.
Paid Holidays: Enjoy 9 paid holidays throughout the year.
Work Environment: A casual dress code, complimentary snacks, and a welcoming company culture.
Ideal Location: Work in an area that offers an outstanding quality of life - a perfect place to live, work, and play!
Company Overview Empirical Systems Aerospace, Inc (ESAero) is a leader in aerospace engineering, product development, and manufacturing, dedicated to delivering high-quality, innovative, and cost-effective solutions to the industry. We specialize in cutting-edge system design, rapid product development, precision manufacturing, comprehensive testing, and technology demonstrations to support the evolving needs of the aerospace community. Committed to excellence, on-time delivery, and continuous growth, we invest in infrastructure to expand our manufacturing and aftermarket capabilities while maintaining the highest standards of engineering services.
At ESAero, we don’t just build products, we engineer solutions that propel the
aerospace industry forward.
This position is fully on-site at ESAero in San Luis Obispo, CA
___________________________________________________________________________
ESAero is an equal opportunity employer. E-Verify participation required for employment. Must present proof of authorization to work in the United States. Must be able to pass background check. Hiring Range: $80k-120k(DOE)
#J-18808-Ljbffr