BD
Overview
Be part of something bigger! BD is one of the largest global medical technology companies in the world and is advancing the world of health by improving medical discovery, diagnostics and the delivery of care. We have over 65,000 employees and a presence in virtually every country around the world to address some of the most challenging global health issues.
Summary of Position with General Responsibilities: This role shall support Quality Assurance Inspection and/or Laboratory activities through inspection and verification of manufactured product, materials, and documentation associated with the manufacture of medical devices at this facility. In addition, this position shall support the Non-Conforming Product, Supplier Controls, and Validation Programs by performing such activities as investigating and processing MRRs, placing product on Quality Hold, managing rework, trending data, and creating and processing Change Requests.
What You Will Do Provide Quality Engineering support to Manufacturing teams. Support Material Review Board in areas of responsibility to investigate and correct quality failures. Work collaboratively to manage/prioritize workflow for self and others in area of responsibility to ensure Team and Plant goals are attained in a manner that optimizes workflow and productivity.
Assist in writing test and inspection procedures.
Assist in the development of appropriate corrective actions to prevent recurrence.
Set up, maintain (PM Tasks), and operate complex inspection and test equipment (i.e., automated inspection equipment, Quadra-Check DROs, etc.).
Develop and perform complex inspection methods, i.e., multi-point diameters & radii, bolt-hole circles, intersection points, angles, etc.
Communicate effectively (orally and in writing) with co-workers, manufacturing teams, Engineering, and Management.
Actively apply Quality control concepts to meet compliance needs. (i.e., GMP, OSHA, Divisional and Corporate guidelines).
Manage/prioritize workflow for self and others in area of responsibility to ensure Team and Plant goals are attained.
Perform other related duties as assigned.
May generate CRs and Test Method Validations and perform MOB activities as needed.
Basic Qualifications
Excellent communications skill with ability to work collaboratively with partners and stakeholders
Mechanical aptitude, capable of operating inspection/test equipment.
Must be able to understand laboratory test method instructions.
Must be able to read and understand technical documents and blueprints
Ability to generate technical documents such as protocols and reports with assistance
Proficient in Microsoft Office Suite.
Statistical math skills up to trigonometry (must understand mean, std. deviations).
Demonstrated ability to understand and apply GMP and GDP principles and follow procedures
Preferred Qualifications
ASQ certification
Demonstrate an understanding of basic GD&T references (i.e., straightness, flatness, roundness, concentricity, runout, datum, etc.).
Demonstrate an understanding of Statistical process control and ability to use SPC software
Demonstrated leadership in area(s) of responsibility and/or fully trained in one or more of the following areas:
Education and/or Experience
Four-year degree in science or technical related field of study. --or-- Two-year degree and three (3) years of experience as a Quality Control Technician or equivalent inspection experience. --or-- HS Diploma, GED and a minimum of five (5) years of experience as a Quality Control Technician or equivalent inspection experience.
Proficiency in reading, writing, and math skills including algebra, statistical math skills up to trigonometry. (Must understand mean and standard deviations).
Previous medical device manufacturing or inspection experience
Physical Demands Occasionally requires light physical effort as in periods of prolonged standing, sitting at machines or worktables or bending, stooping, or reaching and/or lifting of object from desk to chair weighing 30 lbs, above shoulder weighing 30 lbs, push/pull 64 lbs, chair to floor 50 lbs., carry 50 lbs (2 hands); 25 lbs. one hand. Will require some exposure to chemicals used in manufacturing processes
Work Environment Some minor physical inconvenience or discomfort occasionally present in the work situation (moderate noise, disagreeable odors, etc.). OR occasional exposure to minor injury or other health hazard requiring some precaution.
Training Requirements On-the-Job, SOP’s required for position and GMP.
At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting.
For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.
Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.
To learn more about BD visit our careers page. (Note: remove placeholder link in final)
Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics.
Required Skills
Optional Skills
Primary Work Location: USA NY - Glens Falls | Additional Locations | Work Shift: US BD 1st Shift 8am-4pm (United States of America)
Salary information: The salary range includes $22.70 - $35.20 USD per hour. Salary ranges may vary by location and role.
#J-18808-Ljbffr
Summary of Position with General Responsibilities: This role shall support Quality Assurance Inspection and/or Laboratory activities through inspection and verification of manufactured product, materials, and documentation associated with the manufacture of medical devices at this facility. In addition, this position shall support the Non-Conforming Product, Supplier Controls, and Validation Programs by performing such activities as investigating and processing MRRs, placing product on Quality Hold, managing rework, trending data, and creating and processing Change Requests.
What You Will Do Provide Quality Engineering support to Manufacturing teams. Support Material Review Board in areas of responsibility to investigate and correct quality failures. Work collaboratively to manage/prioritize workflow for self and others in area of responsibility to ensure Team and Plant goals are attained in a manner that optimizes workflow and productivity.
Assist in writing test and inspection procedures.
Assist in the development of appropriate corrective actions to prevent recurrence.
Set up, maintain (PM Tasks), and operate complex inspection and test equipment (i.e., automated inspection equipment, Quadra-Check DROs, etc.).
Develop and perform complex inspection methods, i.e., multi-point diameters & radii, bolt-hole circles, intersection points, angles, etc.
Communicate effectively (orally and in writing) with co-workers, manufacturing teams, Engineering, and Management.
Actively apply Quality control concepts to meet compliance needs. (i.e., GMP, OSHA, Divisional and Corporate guidelines).
Manage/prioritize workflow for self and others in area of responsibility to ensure Team and Plant goals are attained.
Perform other related duties as assigned.
May generate CRs and Test Method Validations and perform MOB activities as needed.
Basic Qualifications
Excellent communications skill with ability to work collaboratively with partners and stakeholders
Mechanical aptitude, capable of operating inspection/test equipment.
Must be able to understand laboratory test method instructions.
Must be able to read and understand technical documents and blueprints
Ability to generate technical documents such as protocols and reports with assistance
Proficient in Microsoft Office Suite.
Statistical math skills up to trigonometry (must understand mean, std. deviations).
Demonstrated ability to understand and apply GMP and GDP principles and follow procedures
Preferred Qualifications
ASQ certification
Demonstrate an understanding of basic GD&T references (i.e., straightness, flatness, roundness, concentricity, runout, datum, etc.).
Demonstrate an understanding of Statistical process control and ability to use SPC software
Demonstrated leadership in area(s) of responsibility and/or fully trained in one or more of the following areas:
Education and/or Experience
Four-year degree in science or technical related field of study. --or-- Two-year degree and three (3) years of experience as a Quality Control Technician or equivalent inspection experience. --or-- HS Diploma, GED and a minimum of five (5) years of experience as a Quality Control Technician or equivalent inspection experience.
Proficiency in reading, writing, and math skills including algebra, statistical math skills up to trigonometry. (Must understand mean and standard deviations).
Previous medical device manufacturing or inspection experience
Physical Demands Occasionally requires light physical effort as in periods of prolonged standing, sitting at machines or worktables or bending, stooping, or reaching and/or lifting of object from desk to chair weighing 30 lbs, above shoulder weighing 30 lbs, push/pull 64 lbs, chair to floor 50 lbs., carry 50 lbs (2 hands); 25 lbs. one hand. Will require some exposure to chemicals used in manufacturing processes
Work Environment Some minor physical inconvenience or discomfort occasionally present in the work situation (moderate noise, disagreeable odors, etc.). OR occasional exposure to minor injury or other health hazard requiring some precaution.
Training Requirements On-the-Job, SOP’s required for position and GMP.
At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting.
For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.
Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.
To learn more about BD visit our careers page. (Note: remove placeholder link in final)
Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics.
Required Skills
Optional Skills
Primary Work Location: USA NY - Glens Falls | Additional Locations | Work Shift: US BD 1st Shift 8am-4pm (United States of America)
Salary information: The salary range includes $22.70 - $35.20 USD per hour. Salary ranges may vary by location and role.
#J-18808-Ljbffr