International
Validation Project Engineer – TRATON R&D US, LLC
International, Elmendorf, Texas, United States, 78112
Validation Project Engineer – TRATON R&D US, LLC
International
Position Overview TRATON, through its brands Scania, MAN, International and Volkswagen Truck & Bus, is a leading commercial vehicle manufacturer. The company has integrated the independent R&D organizations of its brands into a single global TRATON R&D organization to accelerate the introduction of new technologies and solutions. This opportunity is for a Validation Project Engineer on the TRATON USA R&D Team. The role focuses on physical testing, validation, and development of commercial vehicle components—including cabs, doors, interiors, exteriors, hoods, steering systems, and more. The candidate will collaborate closely with Design and Analysis teams to ensure tests align with overall validation strategies and performance objectives.
Responsibilities
Test Preparation:
Work closely with design, analysis, and program teams to develop test plans to achieve desired outcomes.
Coordinate test assembly and inspections with Lab Technician.
Test Assembly:
Utilize hand and power tools to assemble test setups.
Fixture Design:
Design test fixtures using NX, AutoCAD, or other CAD systems.
Select appropriate materials for durability and performance.
Fixture Fabrication:
Perform basic fabrication tasks needed for test preparations.
Construct fixtures using Unistrut, angle plates, etc.
Electronics & Controls:
Build and design controller boxes.
Solder, wire, connect, and power various sensor systems.
Programming & Data Acquisition:
Develop scripts/programs using Arduino, Excel, VBA, nCode, LabView, and MTS software.
Pneumatic Systems:
Install pneumatic fittings, air lines, valves, needle valves, and solenoids.
Instrumentation:
Set up and operate sensors such as accelerometers, load cells, LVDTs, strain gauges and more.
Reporting:
Generate detailed engineering reports summarizing test plans, procedures, results, and data interpretation.
Minimum Requirements
Bachelor’s degree in Engineering, Engineering Technology or Computer Science.
At least 5 years of experience in product design/development and/or computer science experience.
OR
Master’s degree in Engineering, Engineering Technology or Computer Science.
At least 3 years of experience in product design/development and/or computer science experience.
OR
PhD in Engineering, Engineering Technology or Computer Science.
Additional Requirements
Qualified candidates, excluding current employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. No work‑sponsorship will be provided.
Desired Skills
Experience: 3 years in testing and validation (automotive or mechanical preferred).
Experience in heavy vehicle or automotive components & design.
Technical Skills:
Hands‑on experience with hydraulic systems (MTS systems a plus).
Strong proficiency in Microsoft Office (Excel, Word, PowerPoint).
Arduino and/or Raspberry Pi programming.
Solid CAD skills (NX preferred).
Instrumentation & Electronics:
Comfortable working with test instrumentation and custom sensor setups.
Mechanical Aptitude:
Demonstrated ability in mechanical fabrication, assembly, and troubleshooting.
Communication:
Strong written and verbal communication skills, especially in technical reporting.
Benefits & Compensation We provide a competitive total rewards package including market-based compensation, health benefits, 401(k) match, tuition assistance, EAP, legal insurance, an employee discount program, and more. Salary range will be commensurate with candidate’s skills, knowledge, and experience.
Learn more about our comprehensive benefits package at
our benefits page .
Company Overview TRATON SE is the parent and holding company of the TRATON GROUP, a global leader in commercial vehicles. The Group’s product portfolio comprises trucks, buses, and light‑duty commercial vehicles. “Transforming Transportation Together. For a sustainable world.”
About International International Motors, LLC (d/b/a International Motors USA) builds International® trucks and engines, IC Bus® school and commercial buses, and develops Fleetrite® aftermarket parts. Our vision is to accelerate sustainable mobility for a cleaner, safer world.
EEO Statement We are an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. If you require a reasonable accommodation due to a disability, please email
hub@international.com
with job title, location, and contact information.
Location & Salary San Antonio, TX Salary: $95,825 – $117,120 (approx.)
#J-18808-Ljbffr
Position Overview TRATON, through its brands Scania, MAN, International and Volkswagen Truck & Bus, is a leading commercial vehicle manufacturer. The company has integrated the independent R&D organizations of its brands into a single global TRATON R&D organization to accelerate the introduction of new technologies and solutions. This opportunity is for a Validation Project Engineer on the TRATON USA R&D Team. The role focuses on physical testing, validation, and development of commercial vehicle components—including cabs, doors, interiors, exteriors, hoods, steering systems, and more. The candidate will collaborate closely with Design and Analysis teams to ensure tests align with overall validation strategies and performance objectives.
Responsibilities
Test Preparation:
Work closely with design, analysis, and program teams to develop test plans to achieve desired outcomes.
Coordinate test assembly and inspections with Lab Technician.
Test Assembly:
Utilize hand and power tools to assemble test setups.
Fixture Design:
Design test fixtures using NX, AutoCAD, or other CAD systems.
Select appropriate materials for durability and performance.
Fixture Fabrication:
Perform basic fabrication tasks needed for test preparations.
Construct fixtures using Unistrut, angle plates, etc.
Electronics & Controls:
Build and design controller boxes.
Solder, wire, connect, and power various sensor systems.
Programming & Data Acquisition:
Develop scripts/programs using Arduino, Excel, VBA, nCode, LabView, and MTS software.
Pneumatic Systems:
Install pneumatic fittings, air lines, valves, needle valves, and solenoids.
Instrumentation:
Set up and operate sensors such as accelerometers, load cells, LVDTs, strain gauges and more.
Reporting:
Generate detailed engineering reports summarizing test plans, procedures, results, and data interpretation.
Minimum Requirements
Bachelor’s degree in Engineering, Engineering Technology or Computer Science.
At least 5 years of experience in product design/development and/or computer science experience.
OR
Master’s degree in Engineering, Engineering Technology or Computer Science.
At least 3 years of experience in product design/development and/or computer science experience.
OR
PhD in Engineering, Engineering Technology or Computer Science.
Additional Requirements
Qualified candidates, excluding current employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. No work‑sponsorship will be provided.
Desired Skills
Experience: 3 years in testing and validation (automotive or mechanical preferred).
Experience in heavy vehicle or automotive components & design.
Technical Skills:
Hands‑on experience with hydraulic systems (MTS systems a plus).
Strong proficiency in Microsoft Office (Excel, Word, PowerPoint).
Arduino and/or Raspberry Pi programming.
Solid CAD skills (NX preferred).
Instrumentation & Electronics:
Comfortable working with test instrumentation and custom sensor setups.
Mechanical Aptitude:
Demonstrated ability in mechanical fabrication, assembly, and troubleshooting.
Communication:
Strong written and verbal communication skills, especially in technical reporting.
Benefits & Compensation We provide a competitive total rewards package including market-based compensation, health benefits, 401(k) match, tuition assistance, EAP, legal insurance, an employee discount program, and more. Salary range will be commensurate with candidate’s skills, knowledge, and experience.
Learn more about our comprehensive benefits package at
our benefits page .
Company Overview TRATON SE is the parent and holding company of the TRATON GROUP, a global leader in commercial vehicles. The Group’s product portfolio comprises trucks, buses, and light‑duty commercial vehicles. “Transforming Transportation Together. For a sustainable world.”
About International International Motors, LLC (d/b/a International Motors USA) builds International® trucks and engines, IC Bus® school and commercial buses, and develops Fleetrite® aftermarket parts. Our vision is to accelerate sustainable mobility for a cleaner, safer world.
EEO Statement We are an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. If you require a reasonable accommodation due to a disability, please email
hub@international.com
with job title, location, and contact information.
Location & Salary San Antonio, TX Salary: $95,825 – $117,120 (approx.)
#J-18808-Ljbffr