Varite
Pay Rate Range - $50.38 - 68.18/hr.
GBaMS ReqID: 10106943
EXPERIENCED ATE TEST AND EVALUATION ENGINEER
US Citizen only ITAR requirements On-site! Aerospace Exp is a must! 10+ years of Exp
THIS IS THE FEEDBACK FROM THE CUSTOMER AND ARE THE TOP PRIORITIES FOR THIS ROLE
For ATE => Following are a must => Software : NI Labview/ NI Teststand. Software development on NI Test stand for ATP/ESS tests. Hardware : National Instruments PXIe/PXI/PCI Protocols: Arinc 429, MIL 1553, CAN, RS 232/485 Tools: MKS, Enovia, Doors etc.
Job Duties:
Handle National Instrument PXI based test equipment. ( Repair & upgrade) Support and maintain acceptance test stations in production and support Integrate 3rd Party hardware to existing test equipment for performance improvements. Provided high level technical support for all testing related issues - diagnosis and priority resolution of "line-down" situations Develop automation system architectures, frameworks, and test tools Develop LabView applications to test production hardware Manufacturing personnel including operator training in software use and system calibration Design Production databases for optimal structure and long-term usage Advise technicians on procedural questions or issues Review questionable test results and provide recommended actions Author and maintain procedural documents for test operators to reference in the performance of production testing
Job Requirements:
10+ years overall experience in test system software & test hardware development Strong knowledge in handling NI PXI, PCI Hardware ( DAQ Cards, Chassis). Integrate 3rd party hardware. Experience in development/ Upgrading automated test equipment , avionics, aerospace programs is a plus. High level of expertise in developing automated testing equipment for production testing of mixed-signal products and sub-assemblies for MIL/Aerospace applications including analog circuits, embedded microprocessors and FPGAs, and supporting circuitry and power supplies. Experience or knowledge of RS422/RS232, ARINC, AFDX interface knowledge, TCP/IP & Ethernet, UDP and such communication standards, protocols and/or interfaces is desirable Experience in managing Software code repositories and Continuous Integration/Deployment is highly desirable Strong verbal and written communication skills. Common I/O protocols (I2C, SPI, JTAG, RS-232, RS-422, RS-485, Arinc 429, MIL-STD-1553, etc). Solid foundation of LabView expertise High level of experience with hands-on troubleshooting and turn-on of new test systems, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc. Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents Skilled in the use of common test bench equipment such as multimeters, DAQs, oscilloscopes, power supplies, RF and optical spectrum analyzers Hands-on and extremely strong in system bring-up, troubleshooting, calibration, etc. High level of expertise in NI LabVIEW , Test Stand & Phyton Experience in reading schematics Experience in test equipment failure analysis and troubleshooting skills in a production environment. Experience with prototyping solutions and bench testing methodology Experience in testing to MIL-STD-810, MIL-STD-461, MIL-STD-1275, RTCA/DO-160 and IPC-610 requirements. Able to handle ITAR data. Must be US Citizen
MFG-NAR/ Seyed Skills: Category Name Required Importance Experience SkillCategoryTest1_MN EIS : LabVIEW Yes 1 7+ years
EXPERIENCED ATE TEST AND EVALUATION ENGINEER
US Citizen only ITAR requirements On-site! Aerospace Exp is a must! 10+ years of Exp
THIS IS THE FEEDBACK FROM THE CUSTOMER AND ARE THE TOP PRIORITIES FOR THIS ROLE
For ATE => Following are a must => Software : NI Labview/ NI Teststand. Software development on NI Test stand for ATP/ESS tests. Hardware : National Instruments PXIe/PXI/PCI Protocols: Arinc 429, MIL 1553, CAN, RS 232/485 Tools: MKS, Enovia, Doors etc.
Job Duties:
Handle National Instrument PXI based test equipment. ( Repair & upgrade) Support and maintain acceptance test stations in production and support Integrate 3rd Party hardware to existing test equipment for performance improvements. Provided high level technical support for all testing related issues - diagnosis and priority resolution of "line-down" situations Develop automation system architectures, frameworks, and test tools Develop LabView applications to test production hardware Manufacturing personnel including operator training in software use and system calibration Design Production databases for optimal structure and long-term usage Advise technicians on procedural questions or issues Review questionable test results and provide recommended actions Author and maintain procedural documents for test operators to reference in the performance of production testing
Job Requirements:
10+ years overall experience in test system software & test hardware development Strong knowledge in handling NI PXI, PCI Hardware ( DAQ Cards, Chassis). Integrate 3rd party hardware. Experience in development/ Upgrading automated test equipment , avionics, aerospace programs is a plus. High level of expertise in developing automated testing equipment for production testing of mixed-signal products and sub-assemblies for MIL/Aerospace applications including analog circuits, embedded microprocessors and FPGAs, and supporting circuitry and power supplies. Experience or knowledge of RS422/RS232, ARINC, AFDX interface knowledge, TCP/IP & Ethernet, UDP and such communication standards, protocols and/or interfaces is desirable Experience in managing Software code repositories and Continuous Integration/Deployment is highly desirable Strong verbal and written communication skills. Common I/O protocols (I2C, SPI, JTAG, RS-232, RS-422, RS-485, Arinc 429, MIL-STD-1553, etc). Solid foundation of LabView expertise High level of experience with hands-on troubleshooting and turn-on of new test systems, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc. Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents Skilled in the use of common test bench equipment such as multimeters, DAQs, oscilloscopes, power supplies, RF and optical spectrum analyzers Hands-on and extremely strong in system bring-up, troubleshooting, calibration, etc. High level of expertise in NI LabVIEW , Test Stand & Phyton Experience in reading schematics Experience in test equipment failure analysis and troubleshooting skills in a production environment. Experience with prototyping solutions and bench testing methodology Experience in testing to MIL-STD-810, MIL-STD-461, MIL-STD-1275, RTCA/DO-160 and IPC-610 requirements. Able to handle ITAR data. Must be US Citizen
MFG-NAR/ Seyed Skills: Category Name Required Importance Experience SkillCategoryTest1_MN EIS : LabVIEW Yes 1 7+ years