Precision Castparts Corp. (PCC)
Quality Inspector 3 - Weekday Night Shift - Bothell
Precision Castparts Corp. (PCC), Bothell, Washington, United States, 98021
Overview
Location: Bothell, WA; Division: Aerostructures; Company: Auburn; Function: Quality; Workplace Type: On-Site; Position Type: Full Time. Opportunity
Position: Quality Inspector - Level 3. The role requires intermediate to advanced inspection skills, with the ability to perform Quality Inspector - Level 1 and 2 duties, operate CMMs, and interpret results. Inspects machined parts, assemblies, raw material, heat treat, and outside processing as part of a broad range of inspection activities. Shift
Monday-Thursday, 3:30pm-2:00am, with training shift Monday-Friday, 7:00am-3:30pm for approximately 2-3 weeks. There is an additional $2.50/hr shift differential for the night shift. Reporting Relationships
The Quality Inspector - Level 3 reports directly to the Inspection Supervisor. Primary Duties & Responsibilities
Inspect fastener installation, sealant, raw material, machine parts, bushings installations, and standards, assemblies, outside processing (NDT, finishes, finish coatings, thermal processing, etc.). Document FAI report Document non-conformances Perform First Part inspections Perform final inspections May occasionally perform special projects Other duties as assigned Required Skills/Experience
Ability to be certified with hardness and eddy current, sealant, bushing and bearing installation, electrical bonding, and fastener installation. Proficient in basic computer skills First part inspection of machined parts utilizing DCC CMMs and/or manual inspection methods (PCDMIS experience preferred) Good knowledge and understanding of Geometric Dimensioning and Tolerancing (GD&T) methods per ASME 14.5; knowledge of common inspection measuring equipment including surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines (PCDMIS software). Experienced in reading and correctly interpreting complex blueprints and engineering requirements Experience in applying basic shop math such as trigonometry to calculate dimensions Identify and segregate non-conforming product Basic understanding of BQMS (Business Quality Management System) processes and procedures Understanding of machine shop and aerospace assembly terminology and nomenclature Fully experienced with all basic and advanced manual inspection tools Enter data using Syteline/ESI or other ERP systems as directed Ability to read and comprehend instructions and write simple correspondence Ability to read and write in English Ability to read and understand technical and engineering material and communicate effectively with coworkers Self-motivated with ability to work alone or in a team Ability to maintain a positive focus and earnest approach in meeting responsibilities and goals 2+ years with recent aircraft machine shop experience Level of Education
High School Diploma or equivalent education Equal Opportunity
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Compensation and Benefits
For informational purposes only, the range of pay for this role is $26.50 to $39.00 USD hourly. This role is eligible to participate in the Company\'s Quarterly Cash Bonus Plan, paid out based on quarterly performance. Employees will receive 120 hours paid time off per year, 10 paid holidays, and eligibility for medical, dental, vision, basic life insurance, and 401(k). Security and Compliance
This position requires use of information or access to production processes subject to national security controls under ITAR and EAR. To be qualified to work in this facility, a U.S. Person must supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a license or permission from the relevant government agency. A U.S. Person is defined as a U.S. Citizen, U.S. National, U.S. Permanent Resident, and certain categories of asylees and refugees.
#J-18808-Ljbffr
Location: Bothell, WA; Division: Aerostructures; Company: Auburn; Function: Quality; Workplace Type: On-Site; Position Type: Full Time. Opportunity
Position: Quality Inspector - Level 3. The role requires intermediate to advanced inspection skills, with the ability to perform Quality Inspector - Level 1 and 2 duties, operate CMMs, and interpret results. Inspects machined parts, assemblies, raw material, heat treat, and outside processing as part of a broad range of inspection activities. Shift
Monday-Thursday, 3:30pm-2:00am, with training shift Monday-Friday, 7:00am-3:30pm for approximately 2-3 weeks. There is an additional $2.50/hr shift differential for the night shift. Reporting Relationships
The Quality Inspector - Level 3 reports directly to the Inspection Supervisor. Primary Duties & Responsibilities
Inspect fastener installation, sealant, raw material, machine parts, bushings installations, and standards, assemblies, outside processing (NDT, finishes, finish coatings, thermal processing, etc.). Document FAI report Document non-conformances Perform First Part inspections Perform final inspections May occasionally perform special projects Other duties as assigned Required Skills/Experience
Ability to be certified with hardness and eddy current, sealant, bushing and bearing installation, electrical bonding, and fastener installation. Proficient in basic computer skills First part inspection of machined parts utilizing DCC CMMs and/or manual inspection methods (PCDMIS experience preferred) Good knowledge and understanding of Geometric Dimensioning and Tolerancing (GD&T) methods per ASME 14.5; knowledge of common inspection measuring equipment including surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines (PCDMIS software). Experienced in reading and correctly interpreting complex blueprints and engineering requirements Experience in applying basic shop math such as trigonometry to calculate dimensions Identify and segregate non-conforming product Basic understanding of BQMS (Business Quality Management System) processes and procedures Understanding of machine shop and aerospace assembly terminology and nomenclature Fully experienced with all basic and advanced manual inspection tools Enter data using Syteline/ESI or other ERP systems as directed Ability to read and comprehend instructions and write simple correspondence Ability to read and write in English Ability to read and understand technical and engineering material and communicate effectively with coworkers Self-motivated with ability to work alone or in a team Ability to maintain a positive focus and earnest approach in meeting responsibilities and goals 2+ years with recent aircraft machine shop experience Level of Education
High School Diploma or equivalent education Equal Opportunity
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Compensation and Benefits
For informational purposes only, the range of pay for this role is $26.50 to $39.00 USD hourly. This role is eligible to participate in the Company\'s Quarterly Cash Bonus Plan, paid out based on quarterly performance. Employees will receive 120 hours paid time off per year, 10 paid holidays, and eligibility for medical, dental, vision, basic life insurance, and 401(k). Security and Compliance
This position requires use of information or access to production processes subject to national security controls under ITAR and EAR. To be qualified to work in this facility, a U.S. Person must supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a license or permission from the relevant government agency. A U.S. Person is defined as a U.S. Citizen, U.S. National, U.S. Permanent Resident, and certain categories of asylees and refugees.
#J-18808-Ljbffr