Infosoft Health
Job Title:
Principal Electrical Engineer Pay Rate:
$80 to $95/HR Duration:
12 months Job Requisition:
JP00077323 Location:
Shoreview, MN
Travel: Quarterly travel to Austin, TX (approx. once per quarter)
This position is for the
Healthcare Diagnostics
division.
We are looking for a Principal Electrical Engineer . This individual will support all phases of new platform development, ranging from concept and technology development through commercialization and post-market support.
The Principal Electrical Engineer will be responsible for helping the team
architect, design,
select, and evaluate critical system components,
prototype, test , and release to production
electronics for needles and consoles.
In addition to electronic
circuit board design
using
embedded processors , RF communications, display technologies,
pump and motor technologies , this individual will develop test techniques to
test amplifiers ,
antennas , high-frequency
interconnects , etc. Additionally, the Principal Electrical Engineer will collaborate with other engineers in creating and improving designs based on test results and optimizing performance.
Architect, design, develop, test, and transfer to production electro mechanical systems and disposables for product development activities. This includes system diagrams, architecture development, component selection and sub-system design, prototype creation, V&V activities, production tool planning and design, and test fixtures for class 2
medical devices.
Specific tasks to include e lectronic architecture design,
block diagram
creation, patient isolation design,
power distribution design , component and processing platform selection , schematic
entry,
layout
support/oversight, prototype build oversight, prototype testing, and transfer to production support.
Research product development solutions and provide analysis for product direction.
Consult and solicit feedback from internal stakeholders to identify customer needs and translate these requirements into engineering designs.
Optimize design and work collaboratively with other design engineers to optimize design based on test results.
Work with external vendors and partners to speed up product development and testing.
Develop necessary
fixtures
and use off-the-shelf equipment to create
test environments
for evaluating the performance of new ablation systems. This may include testing in phantoms, ex vivo tissue testing, in vivo testing, SAR field mapping, etc.
Create related documentation and support materials in conjunction with design and development activities.
Ensure that all interactions and engagements are carried out with the highest ethical and professional standards and that all work is accomplished with quality and in accordance with Varian values
Be a hands-on technical resource for mechanical, electrical, and software engineering teams by contributing to design ideas, problem-solving solving and leading by example
Must-Have Skills:
Over 10 years of experience in
electromechanical
systems design
Extensive background in
medical device
development
Proficient in
IEC 60601
compliance and standards
Skilled in
schematic capture
and
PCB layout
using
Altium Designer
Electromechanical Systems Design Engineer
Requirements
Minimum of a B.S.
degree
in
ElectricalEngineering .
10+ years’ experience
in
electronics design
and system design for new product development.
Experience developing software-driven electromechanical medical devices.
Having previous experience with
ablation devices
is a strong plus.
Experience with electrical engineering design process & tools ( Altium Designer ):
schematic capture ,
PCB layout ,
circuit simulation,
component selection, patient/user safety, power distribution architecture, and design.
Experience with various
wireless communications
technologies such as
Bluetooth ,
Wi-Fi,
and
RFID .
Expert at using
spectrum analyzer , high-frequency scopes, and other test instrumentation.
Hands-on prototyping and troubleshooting experience.
Experience working in an ISO 13845 quality management system is desired. Experience working with Nationally Recognized Testing Laboratories (NRTL) for IEC 60601 compliance is desired.
Experience designing equipment for MRI-compatibility is desired.
Ability to create clear product design documentation, such as concept diagrams, specifications, requirements, test plans, and V&V reports.
Experience working in a team-distributed, collaborative environment.
Extensive hands-on experience with building, testing, and debugging prototype devices.
Experience in transferring new product designs into production.
Highly self-motivated with keen attention to detail.
Ability to adapt and learn new technologies with proven analytical and problem-solving abilities.
Ability to exercise independent judgment and discretion by effectively prioritizing, planning, tracking, and executing team activities in a high-pressure environment.
#J-18808-Ljbffr
Principal Electrical Engineer Pay Rate:
$80 to $95/HR Duration:
12 months Job Requisition:
JP00077323 Location:
Shoreview, MN
Travel: Quarterly travel to Austin, TX (approx. once per quarter)
This position is for the
Healthcare Diagnostics
division.
We are looking for a Principal Electrical Engineer . This individual will support all phases of new platform development, ranging from concept and technology development through commercialization and post-market support.
The Principal Electrical Engineer will be responsible for helping the team
architect, design,
select, and evaluate critical system components,
prototype, test , and release to production
electronics for needles and consoles.
In addition to electronic
circuit board design
using
embedded processors , RF communications, display technologies,
pump and motor technologies , this individual will develop test techniques to
test amplifiers ,
antennas , high-frequency
interconnects , etc. Additionally, the Principal Electrical Engineer will collaborate with other engineers in creating and improving designs based on test results and optimizing performance.
Architect, design, develop, test, and transfer to production electro mechanical systems and disposables for product development activities. This includes system diagrams, architecture development, component selection and sub-system design, prototype creation, V&V activities, production tool planning and design, and test fixtures for class 2
medical devices.
Specific tasks to include e lectronic architecture design,
block diagram
creation, patient isolation design,
power distribution design , component and processing platform selection , schematic
entry,
layout
support/oversight, prototype build oversight, prototype testing, and transfer to production support.
Research product development solutions and provide analysis for product direction.
Consult and solicit feedback from internal stakeholders to identify customer needs and translate these requirements into engineering designs.
Optimize design and work collaboratively with other design engineers to optimize design based on test results.
Work with external vendors and partners to speed up product development and testing.
Develop necessary
fixtures
and use off-the-shelf equipment to create
test environments
for evaluating the performance of new ablation systems. This may include testing in phantoms, ex vivo tissue testing, in vivo testing, SAR field mapping, etc.
Create related documentation and support materials in conjunction with design and development activities.
Ensure that all interactions and engagements are carried out with the highest ethical and professional standards and that all work is accomplished with quality and in accordance with Varian values
Be a hands-on technical resource for mechanical, electrical, and software engineering teams by contributing to design ideas, problem-solving solving and leading by example
Must-Have Skills:
Over 10 years of experience in
electromechanical
systems design
Extensive background in
medical device
development
Proficient in
IEC 60601
compliance and standards
Skilled in
schematic capture
and
PCB layout
using
Altium Designer
Electromechanical Systems Design Engineer
Requirements
Minimum of a B.S.
degree
in
ElectricalEngineering .
10+ years’ experience
in
electronics design
and system design for new product development.
Experience developing software-driven electromechanical medical devices.
Having previous experience with
ablation devices
is a strong plus.
Experience with electrical engineering design process & tools ( Altium Designer ):
schematic capture ,
PCB layout ,
circuit simulation,
component selection, patient/user safety, power distribution architecture, and design.
Experience with various
wireless communications
technologies such as
Bluetooth ,
Wi-Fi,
and
RFID .
Expert at using
spectrum analyzer , high-frequency scopes, and other test instrumentation.
Hands-on prototyping and troubleshooting experience.
Experience working in an ISO 13845 quality management system is desired. Experience working with Nationally Recognized Testing Laboratories (NRTL) for IEC 60601 compliance is desired.
Experience designing equipment for MRI-compatibility is desired.
Ability to create clear product design documentation, such as concept diagrams, specifications, requirements, test plans, and V&V reports.
Experience working in a team-distributed, collaborative environment.
Extensive hands-on experience with building, testing, and debugging prototype devices.
Experience in transferring new product designs into production.
Highly self-motivated with keen attention to detail.
Ability to adapt and learn new technologies with proven analytical and problem-solving abilities.
Ability to exercise independent judgment and discretion by effectively prioritizing, planning, tracking, and executing team activities in a high-pressure environment.
#J-18808-Ljbffr