EMCOR Group
Engineering and Fabrication Director
Headquartered in Conyers, Georgia, Batchelor & Kimball takes pride in partnering with our clients to deliver excellent results from engineering and construction to operations and maintenance. We offer design/build and turnkey construction services, including teaming with selected subcontractors for electrical and general construction.
There's not a lot of BS here, and not a lot of turnover. Good people work at Batchelor & Kimball. We're good at our jobs, and good to each other. We have high expectations because the work is challenging, but we know the most valuable thing about the work is the people who do it. If this sounds like a good fit for you, we'd like to meet you!
If you are looking to grow your career and thrive in a team environment, then we invite you to apply for this position. Candidates with experience in Mechanical Construction or Consulting Engineering will strongly be considered and interviewed.
This is a new division within Batchelor & Kimball that will focus on all aspects of consulting engineering and manufacturing. The director will be responsible for the development of a team that will engineer, manufacture, and deliver fabricated systems based on conceptual information specifically tailored to each client. The candidate will be responsible for the profitability of the product from concept design, through fabrication, and ultimately to installation. While the position is located in Conyers, GA, the director will be an integral part of our business development strategy by attending interviews, surveying existing facilities, offering on-site engineering support, and development of manufacturing opportunities.
Job Responsibilities/Accountabilities:
Champion development of a manufacturing strategy to produce skidded (repeatable) MEP systems. These systems will be specially targeted during the bid process and developed with the design team. Systems may include, but are not limited to:
o Mission critical manufacturing
Hot aisle containment racks
CDU Skids
CRAH Skids
Cooling Tower Skids
Chiller Skids
Umbilical services
o Multi-trade racks
o Equipment Skids
o Multi-service modules
o Vertical Risers
o Prefabricated Plants
Lead and mentor a group of managers, foreman, and VDC personnel to develop manufactured systems for the following facilities:
o Healthcare
o Laboratories
o Mission Critical
o Manufacturing
o Complex and exciting unknowns
Collaborate with the preconstruction team to develop and draw piping, duct, insulation, and controls systems from conceptual level information (Bluebeam and / or Revit) for the following facilities:
o Healthcare
o Laboratories
o Mission Critical
o Manufacturing
o (Again) Complex and exciting unknowns
Evaluate design proposals, engineering plans, equipment and specifications for prefabrication opportunities with the preconstruction and operations team
Present life cycle / cost benefit analysis of various mechanical solutions to owners and contractors
Demonstrate an exhaustive knowledge of NFPA, IBC, IMC, ASHRAE, and other relevant local, state, and federal codes
Strong Leadership Skills
Operates with a continuous improvement mentality
Development and participation in project interviews
Willingly takes ownership and accountability for projects under their direction.
Build, Review, and approve manufacturing estimates (labor, material, and subcontractors) to determine allocation of resources (manpower, equipment, and materials) from start to finish within the fabrication shop
Provide leadership and oversight, internal and external, regarding the successful execution of the manufacturing project workflow and task management with the collective team.
In depth understanding of schedule, construction procedures, material procurement, and project management
Maintains manufacturing consistency across all regions
o Development and maintenance of Operational KPIs
o Development and maintenance of Financial KPIs
o Manufacturing drawings, BOMs, schedules, cost, and execution
o Develop standard LOD400 and LOD500 skid modules
Verify compliance of all VDC drawings produced for spooling prior to sending them to spooling. Work with the Prefabrication VDC Manager and fabrication facility Superintendent to eliminate waste and drive efficiency.
Knowledge, skill and ability requirements (minimum competencies required for job performance)
Strong verbal, written and interpersonal skills
Consistent dependability and availability
Ability to work in a fast-paced construction office environment
Ability to organize and curate documents related work orders and personnel
Aptitude to learn new systems
Mechanical Knowledge
Project Management
Train estimating staff on technical aspects of Consulting Engineering
Understand company resource production capabilities and implement in the construction process
Professionally solicit vendors and suppliers during the procurement process
Prior work experience and educational requirements
Bachelor's degree from a four-year college or university; or 10 + years of manufacturing experience and/or training; or equivalent combination of education and experience
Construction Management, Construction Science, Mechanical Engineering, or similar degree highly preferred
EIT, Certified Plumbing Designer, or Licensed engineer is a plus
Experience in a manufacturing environment
Experience with Autobid software and Revit
Advanced skills in Excel
Energy modeling proficiency
LEED AP BD+C Certification
Certified Energy Manager
Lean Manufacturing Proficiency
NOTE: This job description is not intended to be all-inclusive. The duties described may change at the discretion of management, and the employee may be required to perform duties that are not listed in the job description.
We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled.
#BandK #Onsite
Department
BKI Georgia Main Office
Employment Type
Office Employees
Minimum Experience
Executive
Compensation
Commensurate on Experience
Headquartered in Conyers, Georgia, Batchelor & Kimball takes pride in partnering with our clients to deliver excellent results from engineering and construction to operations and maintenance. We offer design/build and turnkey construction services, including teaming with selected subcontractors for electrical and general construction.
There's not a lot of BS here, and not a lot of turnover. Good people work at Batchelor & Kimball. We're good at our jobs, and good to each other. We have high expectations because the work is challenging, but we know the most valuable thing about the work is the people who do it. If this sounds like a good fit for you, we'd like to meet you!
If you are looking to grow your career and thrive in a team environment, then we invite you to apply for this position. Candidates with experience in Mechanical Construction or Consulting Engineering will strongly be considered and interviewed.
This is a new division within Batchelor & Kimball that will focus on all aspects of consulting engineering and manufacturing. The director will be responsible for the development of a team that will engineer, manufacture, and deliver fabricated systems based on conceptual information specifically tailored to each client. The candidate will be responsible for the profitability of the product from concept design, through fabrication, and ultimately to installation. While the position is located in Conyers, GA, the director will be an integral part of our business development strategy by attending interviews, surveying existing facilities, offering on-site engineering support, and development of manufacturing opportunities.
Job Responsibilities/Accountabilities:
Champion development of a manufacturing strategy to produce skidded (repeatable) MEP systems. These systems will be specially targeted during the bid process and developed with the design team. Systems may include, but are not limited to:
o Mission critical manufacturing
Hot aisle containment racks
CDU Skids
CRAH Skids
Cooling Tower Skids
Chiller Skids
Umbilical services
o Multi-trade racks
o Equipment Skids
o Multi-service modules
o Vertical Risers
o Prefabricated Plants
Lead and mentor a group of managers, foreman, and VDC personnel to develop manufactured systems for the following facilities:
o Healthcare
o Laboratories
o Mission Critical
o Manufacturing
o Complex and exciting unknowns
Collaborate with the preconstruction team to develop and draw piping, duct, insulation, and controls systems from conceptual level information (Bluebeam and / or Revit) for the following facilities:
o Healthcare
o Laboratories
o Mission Critical
o Manufacturing
o (Again) Complex and exciting unknowns
Evaluate design proposals, engineering plans, equipment and specifications for prefabrication opportunities with the preconstruction and operations team
Present life cycle / cost benefit analysis of various mechanical solutions to owners and contractors
Demonstrate an exhaustive knowledge of NFPA, IBC, IMC, ASHRAE, and other relevant local, state, and federal codes
Strong Leadership Skills
Operates with a continuous improvement mentality
Development and participation in project interviews
Willingly takes ownership and accountability for projects under their direction.
Build, Review, and approve manufacturing estimates (labor, material, and subcontractors) to determine allocation of resources (manpower, equipment, and materials) from start to finish within the fabrication shop
Provide leadership and oversight, internal and external, regarding the successful execution of the manufacturing project workflow and task management with the collective team.
In depth understanding of schedule, construction procedures, material procurement, and project management
Maintains manufacturing consistency across all regions
o Development and maintenance of Operational KPIs
o Development and maintenance of Financial KPIs
o Manufacturing drawings, BOMs, schedules, cost, and execution
o Develop standard LOD400 and LOD500 skid modules
Verify compliance of all VDC drawings produced for spooling prior to sending them to spooling. Work with the Prefabrication VDC Manager and fabrication facility Superintendent to eliminate waste and drive efficiency.
Knowledge, skill and ability requirements (minimum competencies required for job performance)
Strong verbal, written and interpersonal skills
Consistent dependability and availability
Ability to work in a fast-paced construction office environment
Ability to organize and curate documents related work orders and personnel
Aptitude to learn new systems
Mechanical Knowledge
Project Management
Train estimating staff on technical aspects of Consulting Engineering
Understand company resource production capabilities and implement in the construction process
Professionally solicit vendors and suppliers during the procurement process
Prior work experience and educational requirements
Bachelor's degree from a four-year college or university; or 10 + years of manufacturing experience and/or training; or equivalent combination of education and experience
Construction Management, Construction Science, Mechanical Engineering, or similar degree highly preferred
EIT, Certified Plumbing Designer, or Licensed engineer is a plus
Experience in a manufacturing environment
Experience with Autobid software and Revit
Advanced skills in Excel
Energy modeling proficiency
LEED AP BD+C Certification
Certified Energy Manager
Lean Manufacturing Proficiency
NOTE: This job description is not intended to be all-inclusive. The duties described may change at the discretion of management, and the employee may be required to perform duties that are not listed in the job description.
We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled.
#BandK #Onsite
Department
BKI Georgia Main Office
Employment Type
Office Employees
Minimum Experience
Executive
Compensation
Commensurate on Experience