GE Vernova
Join to apply for the
Instrumentation and Controls Technician
role at
GE Vernova .
Job Description Come and join our powerful, unified force with the energy to change the world. Our mission is BIG. Our TRANSFORMATION is key – bringing the right businesses together to LEAD the ENERGY TRANSITION. Our TEAM is ready. The instrumentation and controls technician is responsible for the calibration, troubleshooting, repair, maintenance, and installation of site instrumentation, controls, and electrical components within a Combined Cycle power plant.
Essential Responsibilities
Maintain and repair all electrical, instrumentation and control systems on site.
Perform calibration as required on all control system input and output devices. Example: transmitters, control valves, etc.
Maintain power distribution equipment including switchgear, motor control centers, power distribution panels, etc.
Assist in improvement of maintenance procedures and record keeping.
Maintain Gas Turbine Continuous Emissions Monitoring System.
Support Operations and Maintenance personnel as required.
Comply with all applicable environmental, health, and safety policies to maintain a safe working environment.
Qualifications / Requirements
Minimum high school diploma graduate or equivalent.
Minimum 4 years progressively responsible experience in power plant, marine, refinery, or similar industries.
Proficient in calibration and troubleshooting of Instrumentation.
Experience with repair or replacement of process control instrumentation.
Fundamental knowledge of programmable logic controllers or distributed control systems.
Fundamental knowledge of electrical distribution equipment.
Able to use test instruments for electrical testing and troubleshooting.
Available for call‑outs during the week and weekends.
Willing to learn equipment operation, troubleshooting and repair from Manufacturers Manuals or other information.
Able to climb ladders and stairs to access equipment installed within the power plant.
Able to pass a pre‑hire background check, drug screening, and physical exam.
Desired Characteristics
Installation, setup, and troubleshooting of networks and network switches.
Demonstrated knowledge in calibration and troubleshooting of instrumentation with record of success outside of school.
Experience in Maintenance Management System.
Experience with troubleshooting and repair without established procedures.
Knowledge of Modbus concept.
Familiarization with the National Electrical Code.
Associate of Applied Science (AAS) degree in Electronics Technology or Electronics Engineering Technology.
Willing to share knowledge and experience with other technicians in the group.
Proficient in using computers running Microsoft Windows 7 and Microsoft programs Word, Excel, etc.
Flexible, adapts well to changes in scope and schedule.
Thrives on variety, learning, and cooperation.
Collaborates effectively in a team setting.
Qualified to operate aerial lift, scissor lift, forklift.
This position is at Kalaeloa Cogen located in Kapolei, Hawaii, a combined cycle power plant comprised of 2 gas turbines and 1 steam turbine.
About Us At GE, we believe in the value of your unique identity, background and experiences. We are committed to fostering an
inclusive
culture
where everyone feels empowered to do their best work because they feel accepted, respected and that they belong.
Pay The U.S. based candidates only, pay range for this position is $27 - $38 per hour. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set.
The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas.
This position will stay open on the career website until at least 11/5/2025.
Benefits Available To You
Our compensation & benefits are designed to help you manage your personal and family needs, while rewarding high performers. We offer a robust benefits package depending on your employment status and your national requirements.
A healthy, balanced lifestyle can mean different things to different people. We’ve created programs that support the way you live and work today.
GE invests to provide opportunities to grow your career by providing a path for continued on‑the‑job learning and development.
The Healthcare benefit includes medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services.
Retirement benefits include the GE Retirement Savings Plan, a tax‑advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants.
Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time‑off for vacation or illness.
Relocation Assistance Provided: No
Job Details
Seniority level: Mid‑Senior level
Employment type: Full‑time
Job function: Engineering and Information Technology
Industries: Electric Power Generation
EEO Statement GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
#J-18808-Ljbffr
Instrumentation and Controls Technician
role at
GE Vernova .
Job Description Come and join our powerful, unified force with the energy to change the world. Our mission is BIG. Our TRANSFORMATION is key – bringing the right businesses together to LEAD the ENERGY TRANSITION. Our TEAM is ready. The instrumentation and controls technician is responsible for the calibration, troubleshooting, repair, maintenance, and installation of site instrumentation, controls, and electrical components within a Combined Cycle power plant.
Essential Responsibilities
Maintain and repair all electrical, instrumentation and control systems on site.
Perform calibration as required on all control system input and output devices. Example: transmitters, control valves, etc.
Maintain power distribution equipment including switchgear, motor control centers, power distribution panels, etc.
Assist in improvement of maintenance procedures and record keeping.
Maintain Gas Turbine Continuous Emissions Monitoring System.
Support Operations and Maintenance personnel as required.
Comply with all applicable environmental, health, and safety policies to maintain a safe working environment.
Qualifications / Requirements
Minimum high school diploma graduate or equivalent.
Minimum 4 years progressively responsible experience in power plant, marine, refinery, or similar industries.
Proficient in calibration and troubleshooting of Instrumentation.
Experience with repair or replacement of process control instrumentation.
Fundamental knowledge of programmable logic controllers or distributed control systems.
Fundamental knowledge of electrical distribution equipment.
Able to use test instruments for electrical testing and troubleshooting.
Available for call‑outs during the week and weekends.
Willing to learn equipment operation, troubleshooting and repair from Manufacturers Manuals or other information.
Able to climb ladders and stairs to access equipment installed within the power plant.
Able to pass a pre‑hire background check, drug screening, and physical exam.
Desired Characteristics
Installation, setup, and troubleshooting of networks and network switches.
Demonstrated knowledge in calibration and troubleshooting of instrumentation with record of success outside of school.
Experience in Maintenance Management System.
Experience with troubleshooting and repair without established procedures.
Knowledge of Modbus concept.
Familiarization with the National Electrical Code.
Associate of Applied Science (AAS) degree in Electronics Technology or Electronics Engineering Technology.
Willing to share knowledge and experience with other technicians in the group.
Proficient in using computers running Microsoft Windows 7 and Microsoft programs Word, Excel, etc.
Flexible, adapts well to changes in scope and schedule.
Thrives on variety, learning, and cooperation.
Collaborates effectively in a team setting.
Qualified to operate aerial lift, scissor lift, forklift.
This position is at Kalaeloa Cogen located in Kapolei, Hawaii, a combined cycle power plant comprised of 2 gas turbines and 1 steam turbine.
About Us At GE, we believe in the value of your unique identity, background and experiences. We are committed to fostering an
inclusive
culture
where everyone feels empowered to do their best work because they feel accepted, respected and that they belong.
Pay The U.S. based candidates only, pay range for this position is $27 - $38 per hour. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set.
The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas.
This position will stay open on the career website until at least 11/5/2025.
Benefits Available To You
Our compensation & benefits are designed to help you manage your personal and family needs, while rewarding high performers. We offer a robust benefits package depending on your employment status and your national requirements.
A healthy, balanced lifestyle can mean different things to different people. We’ve created programs that support the way you live and work today.
GE invests to provide opportunities to grow your career by providing a path for continued on‑the‑job learning and development.
The Healthcare benefit includes medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services.
Retirement benefits include the GE Retirement Savings Plan, a tax‑advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants.
Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time‑off for vacation or illness.
Relocation Assistance Provided: No
Job Details
Seniority level: Mid‑Senior level
Employment type: Full‑time
Job function: Engineering and Information Technology
Industries: Electric Power Generation
EEO Statement GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
#J-18808-Ljbffr