Advantage Technical
Facilities Automation Technician
Scope of work: Facilities automation controls wiring.
Project Overview The purpose of this project is to install, terminate, and test low-voltage controls wiring for a building automation system (BAS) within a facility. The work must be performed by a qualified facilities automation technician with a strong understanding of commercial HVAC and controls systems. The technician must adhere to all applicable national, state, and local electrical codes, as well as manufacturer specifications and project drawings.
General Requirements
Safety:
The technician must follow all Occupational Safety and Health Administration (OSHA) regulations and site‑specific safety protocols, including the use of proper personal protective equipment (PPE).
Tools and equipment:
The technician is responsible for providing all standard controls‑related tools, including multi‑meters, wire strippers, benders, crimpers, and personal safety equipment. Specialized tools will be provided or agreed upon in advance.
Coordination:
The technician is expected to coordinate their work with other trades on site, including electricians, HVAC mechanics, and commissioning agents, to ensure a smooth workflow and avoid conflicts.
Documentation:
All work must be completed according to the latest project plans, schematics, and wiring diagrams. The technician must also maintain accurate records of tasks completed.
Workmanship:
All wiring and terminations must be completed in a neat, organized, and professional manner, following industry best practices.
Tasks and Responsibilities 3.1 Wiring installation
Install all necessary electrical raceways, including conduit (EMT, rigid, flexible) and cable tray, to support controls wiring.
Pull low‑voltage wires, including multi‑conductor cables, communication wiring (e.g., Cat5e, Cat6), and shielded cables, between controllers and field devices.
Securely mount all controls devices, including sensors, actuators, and controllers, to the specified location on mechanical equipment or structural surfaces.
3.2 Controls device wiring
Run and terminate controls wiring for modulating and two‑position actuators on valves and dampers.
Install and terminate low‑voltage controls wiring for VFDs, including start/stop signals, speed control signals (e.g., 0‑10 VDC), and status feedback.
Run and terminate wiring for temperature and humidity sensors (e.g., wall sensors, duct sensors, immersion sensors).
Run and terminate wiring for pressure transducers or switches for monitoring air or water pressure.
Install and wire other field sensing devices as required by the project plans (e.g., flow switches, current sensors, smoke detectors).
3.3 Termination and labeling
Terminate all field wiring at the designated controls panels, labeling each wire with its corresponding source and destination.
Neatly and correctly terminate all wires at the field devices, following the manufacturer's installation instructions.
Use a multi‑meter to test for proper voltage and ensure continuity and connectivity of all wires, verifying all circuits are free of shorts or opens.
Deliverables
A fully wired controls system with properly terminated and labeled cables, ready for the commissioning phase.
A red‑lined set of project drawings reflecting any changes or modifications made during installation.
Documentation of wire tests conducted and any identified issues or resolutions.
Qualifications and Experience
Minimum of 3–5 years of commercial or industrial electrical and controls experience.
Proven ability to read and interpret complex electrical schematics, mechanical diagrams, and controls plans.
Expertise in installing and troubleshooting low‑voltage (24 V AC/DC) control circuits.
Knowledge of standard communication protocols used in building automation (e.g., BACnet, Modbus).
Proficiency in the proper and safe use of electrical testing equipment.
Strong understanding of National Electrical Code (NEC) and local code requirements.
Advantage Technical is committed to providing equal employment opportunity for all persons regardless of race, color, religion (including religious dress and grooming practices), sex, sexual orientation, gender, gender identity, gender expression, age, marital status, national origin, ancestry, citizenship status, pregnancy, medical condition, genetic information, mental and physical disability, political affiliation, union membership, status as a parent, military or veteran status, or other non‑merit based factors. We will provide reasonable accommodations throughout the application, interviewing and employment process. If you require a reasonable accommodation, contact your local branch. Advantage Technical is an E‑Verify employer. This policy is applicable to all phases of the employment relationship, including hiring, transfers, promotions, training, terminations, working conditions, compensation, benefits, and other terms and conditions of employment.
#J-18808-Ljbffr
Project Overview The purpose of this project is to install, terminate, and test low-voltage controls wiring for a building automation system (BAS) within a facility. The work must be performed by a qualified facilities automation technician with a strong understanding of commercial HVAC and controls systems. The technician must adhere to all applicable national, state, and local electrical codes, as well as manufacturer specifications and project drawings.
General Requirements
Safety:
The technician must follow all Occupational Safety and Health Administration (OSHA) regulations and site‑specific safety protocols, including the use of proper personal protective equipment (PPE).
Tools and equipment:
The technician is responsible for providing all standard controls‑related tools, including multi‑meters, wire strippers, benders, crimpers, and personal safety equipment. Specialized tools will be provided or agreed upon in advance.
Coordination:
The technician is expected to coordinate their work with other trades on site, including electricians, HVAC mechanics, and commissioning agents, to ensure a smooth workflow and avoid conflicts.
Documentation:
All work must be completed according to the latest project plans, schematics, and wiring diagrams. The technician must also maintain accurate records of tasks completed.
Workmanship:
All wiring and terminations must be completed in a neat, organized, and professional manner, following industry best practices.
Tasks and Responsibilities 3.1 Wiring installation
Install all necessary electrical raceways, including conduit (EMT, rigid, flexible) and cable tray, to support controls wiring.
Pull low‑voltage wires, including multi‑conductor cables, communication wiring (e.g., Cat5e, Cat6), and shielded cables, between controllers and field devices.
Securely mount all controls devices, including sensors, actuators, and controllers, to the specified location on mechanical equipment or structural surfaces.
3.2 Controls device wiring
Run and terminate controls wiring for modulating and two‑position actuators on valves and dampers.
Install and terminate low‑voltage controls wiring for VFDs, including start/stop signals, speed control signals (e.g., 0‑10 VDC), and status feedback.
Run and terminate wiring for temperature and humidity sensors (e.g., wall sensors, duct sensors, immersion sensors).
Run and terminate wiring for pressure transducers or switches for monitoring air or water pressure.
Install and wire other field sensing devices as required by the project plans (e.g., flow switches, current sensors, smoke detectors).
3.3 Termination and labeling
Terminate all field wiring at the designated controls panels, labeling each wire with its corresponding source and destination.
Neatly and correctly terminate all wires at the field devices, following the manufacturer's installation instructions.
Use a multi‑meter to test for proper voltage and ensure continuity and connectivity of all wires, verifying all circuits are free of shorts or opens.
Deliverables
A fully wired controls system with properly terminated and labeled cables, ready for the commissioning phase.
A red‑lined set of project drawings reflecting any changes or modifications made during installation.
Documentation of wire tests conducted and any identified issues or resolutions.
Qualifications and Experience
Minimum of 3–5 years of commercial or industrial electrical and controls experience.
Proven ability to read and interpret complex electrical schematics, mechanical diagrams, and controls plans.
Expertise in installing and troubleshooting low‑voltage (24 V AC/DC) control circuits.
Knowledge of standard communication protocols used in building automation (e.g., BACnet, Modbus).
Proficiency in the proper and safe use of electrical testing equipment.
Strong understanding of National Electrical Code (NEC) and local code requirements.
Advantage Technical is committed to providing equal employment opportunity for all persons regardless of race, color, religion (including religious dress and grooming practices), sex, sexual orientation, gender, gender identity, gender expression, age, marital status, national origin, ancestry, citizenship status, pregnancy, medical condition, genetic information, mental and physical disability, political affiliation, union membership, status as a parent, military or veteran status, or other non‑merit based factors. We will provide reasonable accommodations throughout the application, interviewing and employment process. If you require a reasonable accommodation, contact your local branch. Advantage Technical is an E‑Verify employer. This policy is applicable to all phases of the employment relationship, including hiring, transfers, promotions, training, terminations, working conditions, compensation, benefits, and other terms and conditions of employment.
#J-18808-Ljbffr