Energy Jobline ZR
Energy Jobline is the largest and fastest growing global Energy Job Board and Energy Hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.
We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.
Job DescriptionJob Description
Position Description:
Rosenblad Design Group (RDG) a manufacturer of evaporation and crystallization systems, is seeking several Fabricators / Welders to join our production team. The individuals will participate in partial and full system and equipment fabrication. The ideal candidates will have a minimum of ASME welding experience 3 years’ experience as a combination GTAW and GMAW welder.
Individuals must pass a pre-hire ASME Section 9 welder certification test. A GTAW tests will be a stainless pipe with a wall thickness of .343 welded in the 6G position.
Primary Duties and Responsibilities:
· Willingness to cross-train and perform the work of other job tasks in addition to the primary assigned position.
· Operate forklifts, overhead crane, hand power tools, slings, grinders, plasma cutter, and other hand tools.
· Keeps equipment and work area clean and orderly.
· Perform both GTAW and GMAW welding on large stainless steel components to ASME section 9 code requirements.
· Ability to follow a Welding Procedure Specification (WPS) for TIG and MIG welding 304L, 316L, 2101 Duplex, 2205 Duplex and additional higher alloys.
· GTAW weld Stainless Steel in the thickness range of .036 to .500 inch.
· GMAW welding Stainless Steel in the thickness range of 5/8 up to 1 inch.
· Ability to read and follow shop drawings, sketches, production drawings, welding symbols.
· Comfortable welding at times above ground from a man lift.
· Insuring that all material surfaces to be welded are clean and free of dirt, oils, paint, slag and other contaminants.
· Inspect and correct welds as necessary to meet product specifications.
· Detect faulty operation of equipment or defective materials and notify supervisors.
· Monitor the fitting and welding processes to avoid warping, shrinking, distortion.
PHYSICAL REQUIREMENTS:
Standing
Walking
Pulling and Pushing
Carrying
Grasping
Reaching
Stooping and Crouching
Welding Determination
Near Acuity
Occasional lifting 50 lbs.
WORK ENVIRONMENT:
This position requires work in a manufacturing environment facility and occasionally at field locations for installations.
The employee is occasionally exposed to fumes or airborne particles.
SAFETY:
Perform all duties in a safe and efficient manner according to company and OSHA safety guidelines.
Wear the proper personal protective equipment and use safe work habits.
Rosenblad has a zero alcohol and drug tolerance policy.
EDUCATION:
High school diploma or GED plus three years related work experience with ASME section 9 code as a combination welder. Completion of formal welding apprenticeship program is highly desired. Previous work history and employer references will be required.
Schedule:
Full Time / First Shift: 6:00am to 2:30pm (M-F) –position will be located at our facility in Yulee, FL. At times longer work hours and potentially some weekend overtime might be required to meet project deadlines.
Compensation:
To be determined based on applicants qualifications
Job Type: Full-time
Pay: $20.00 - $25.00 per hour
Expected hours: 40 – 80 per week
If you are interested in applying for this job please press the Apply Button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.
We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.
Job DescriptionJob Description
Position Description:
Rosenblad Design Group (RDG) a manufacturer of evaporation and crystallization systems, is seeking several Fabricators / Welders to join our production team. The individuals will participate in partial and full system and equipment fabrication. The ideal candidates will have a minimum of ASME welding experience 3 years’ experience as a combination GTAW and GMAW welder.
Individuals must pass a pre-hire ASME Section 9 welder certification test. A GTAW tests will be a stainless pipe with a wall thickness of .343 welded in the 6G position.
Primary Duties and Responsibilities:
· Willingness to cross-train and perform the work of other job tasks in addition to the primary assigned position.
· Operate forklifts, overhead crane, hand power tools, slings, grinders, plasma cutter, and other hand tools.
· Keeps equipment and work area clean and orderly.
· Perform both GTAW and GMAW welding on large stainless steel components to ASME section 9 code requirements.
· Ability to follow a Welding Procedure Specification (WPS) for TIG and MIG welding 304L, 316L, 2101 Duplex, 2205 Duplex and additional higher alloys.
· GTAW weld Stainless Steel in the thickness range of .036 to .500 inch.
· GMAW welding Stainless Steel in the thickness range of 5/8 up to 1 inch.
· Ability to read and follow shop drawings, sketches, production drawings, welding symbols.
· Comfortable welding at times above ground from a man lift.
· Insuring that all material surfaces to be welded are clean and free of dirt, oils, paint, slag and other contaminants.
· Inspect and correct welds as necessary to meet product specifications.
· Detect faulty operation of equipment or defective materials and notify supervisors.
· Monitor the fitting and welding processes to avoid warping, shrinking, distortion.
PHYSICAL REQUIREMENTS:
Standing
Walking
Pulling and Pushing
Carrying
Grasping
Reaching
Stooping and Crouching
Welding Determination
Near Acuity
Occasional lifting 50 lbs.
WORK ENVIRONMENT:
This position requires work in a manufacturing environment facility and occasionally at field locations for installations.
The employee is occasionally exposed to fumes or airborne particles.
SAFETY:
Perform all duties in a safe and efficient manner according to company and OSHA safety guidelines.
Wear the proper personal protective equipment and use safe work habits.
Rosenblad has a zero alcohol and drug tolerance policy.
EDUCATION:
High school diploma or GED plus three years related work experience with ASME section 9 code as a combination welder. Completion of formal welding apprenticeship program is highly desired. Previous work history and employer references will be required.
Schedule:
Full Time / First Shift: 6:00am to 2:30pm (M-F) –position will be located at our facility in Yulee, FL. At times longer work hours and potentially some weekend overtime might be required to meet project deadlines.
Compensation:
To be determined based on applicants qualifications
Job Type: Full-time
Pay: $20.00 - $25.00 per hour
Expected hours: 40 – 80 per week
If you are interested in applying for this job please press the Apply Button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.