Primient
Electrical
Power Systems & Distribution
Experience with AC and DC voltages: 161kV, 13.2kV, 4160V, 480V, 277V, 240/120V, 24V, and 12V.
Main substation switching - 13.2kV to 480V distribution operations.
Main yard switching and safe handling of high-voltage power equipment and
switches
161kV to 13.8kV.
Expertise
with Siemens Allis 1600A and 3200A breakers, as well as fuse sizing and breaker sizing.
Grounding, arc fault cleaning, and arc flash safety practices, including full competency in Arc Flash PPE up to 40Cal suits.
Motor Systems & Starters
Wiring and troubleshooting 480V starter buckets, 4160V synchronous motor starters, and general motor wiring.
Proficiency
in motor testing, motor sizing, and advanced fault troubleshooting.
Skilled in motor starters - wye/delta starters, autotransformers, soft starts, part winding,
vfd’s
.
Control Systems & Drives
Control wiring installation, repair, and troubleshooting.
Reading and interpreting wiring schematics.
Proficiency
in Siemens, Allen-Bradley (AB), and ABB variable frequency drives (VFDs).
PLC wiring and troubleshooting, including communication protocols and communication troubleshooting.
Competence in low voltage controls and advanced troubleshooting techniques.
Testing & Reliability
Circuit testing, conductive testing, and high-voltage testing.
Overload and wire sizing calculations for safe system design.
Infrared scanning for preventive maintenance.
Skilled with diagnostic tools such as the Fluke II 900.
Expertise
in fault
locating
, failure root cause analysis, and serving as a failure investigations resource.
Providing leadership in electrical reliability programs.
Field Electrical Work
Installation and maintenance of heat trace systems and lighting systems.
HV and MV cable terminations.
Conduit bending, wire pulling, and rigging for heavy electrical equipment.
Working with generators and related switching equipment.
Ins
trumentation Transmitters & Measurement Devices
Pressure, level, temperature, flow, pH,
conductivity
and dissolved oxygen (DO) transmitters.
Proficiency
in calibration, configuration, and troubleshooting.
Valves & Actuators
Analog valves and digital valves installation and tuning.
Expertise
in gas valves and control systems related to burner operations.
Switches & Safety Devices
Pressure, temperature, flow, level, limit, and explosion-proof switches.
Advanced knowledge of safety interlocks and fail-safe systems.
Actuation Systems
Pneumatic and hydraulic cylinders, troubleshooting and integration into automated systems.
Burner management systems commissioning, troubleshooting, and compliance.
Instrumentation Reliability
Preventive and predictive maintenance to ensure instrumentation integrity.
Skilled in tubing bending and installing for process instrumentation.
Systems, Software & Analytical Tools Proficiency
in SAP for maintenance management (CMMS) and PI Vision for process monitoring and data analysis. Integration of instrumentation with PLC and control systems for optimized plant performance
.
Additional Competencies Serve as an E&I Trainer, mentoring and developing junior technicians.
Knowledge
in
both
electrical and instrumentation reliability programs.
Participate in failure investigations and provide technical
expertise
for root cause analysis.
Strict adherence to safety regulations, with professional competence in arc flash protection, lockout/tagout, and hazard analysis.
P
referred
Qualifi
cations & Experience
3
+ years’ experience in industrial Electrical & Instrumentation
Advanced knowledge of high, medium, and low voltage systems.
Proficiency
with both electrical power distribution and process instrumentation systems in heavy industrial environments.
Demonstrated success in troubleshooting complex issues, leading reliability initiatives, and training others.
Strong analytical skills
Physical Requirements Lift up to 55
lbs
without
assistance
Climb ladders (up to 15 ft) and multiple flights of stairs
Stand for up to 1 hour without sitting
Perform bending and twisting motions
Work flexible schedules and respond to on-call needs
Work Environment Exposure to mechanical parts, vibration, airborne particles, and loud noise
Work in both industrial and office settings
Outdoor work in inclement weather, heat, humidity, and dust
Use of standard office equipment (computers, phones, etc.)
FES Duty of Care Food Safety Ensure products meet food safety, legal, and quality standards
Environment Comply with
environmental procedures and report violations or near misses
Health & Safety Follow site safety policies and
participate
in safety programs
Experience with AC and DC voltages: 161kV, 13.2kV, 4160V, 480V, 277V, 240/120V, 24V, and 12V.
Main substation switching - 13.2kV to 480V distribution operations.
Main yard switching and safe handling of high-voltage power equipment and
switches
161kV to 13.8kV.
Expertise
with Siemens Allis 1600A and 3200A breakers, as well as fuse sizing and breaker sizing.
Grounding, arc fault cleaning, and arc flash safety practices, including full competency in Arc Flash PPE up to 40Cal suits.
Motor Systems & Starters
Wiring and troubleshooting 480V starter buckets, 4160V synchronous motor starters, and general motor wiring.
Proficiency
in motor testing, motor sizing, and advanced fault troubleshooting.
Skilled in motor starters - wye/delta starters, autotransformers, soft starts, part winding,
vfd’s
.
Control Systems & Drives
Control wiring installation, repair, and troubleshooting.
Reading and interpreting wiring schematics.
Proficiency
in Siemens, Allen-Bradley (AB), and ABB variable frequency drives (VFDs).
PLC wiring and troubleshooting, including communication protocols and communication troubleshooting.
Competence in low voltage controls and advanced troubleshooting techniques.
Testing & Reliability
Circuit testing, conductive testing, and high-voltage testing.
Overload and wire sizing calculations for safe system design.
Infrared scanning for preventive maintenance.
Skilled with diagnostic tools such as the Fluke II 900.
Expertise
in fault
locating
, failure root cause analysis, and serving as a failure investigations resource.
Providing leadership in electrical reliability programs.
Field Electrical Work
Installation and maintenance of heat trace systems and lighting systems.
HV and MV cable terminations.
Conduit bending, wire pulling, and rigging for heavy electrical equipment.
Working with generators and related switching equipment.
Ins
trumentation Transmitters & Measurement Devices
Pressure, level, temperature, flow, pH,
conductivity
and dissolved oxygen (DO) transmitters.
Proficiency
in calibration, configuration, and troubleshooting.
Valves & Actuators
Analog valves and digital valves installation and tuning.
Expertise
in gas valves and control systems related to burner operations.
Switches & Safety Devices
Pressure, temperature, flow, level, limit, and explosion-proof switches.
Advanced knowledge of safety interlocks and fail-safe systems.
Actuation Systems
Pneumatic and hydraulic cylinders, troubleshooting and integration into automated systems.
Burner management systems commissioning, troubleshooting, and compliance.
Instrumentation Reliability
Preventive and predictive maintenance to ensure instrumentation integrity.
Skilled in tubing bending and installing for process instrumentation.
Systems, Software & Analytical Tools Proficiency
in SAP for maintenance management (CMMS) and PI Vision for process monitoring and data analysis. Integration of instrumentation with PLC and control systems for optimized plant performance
.
Additional Competencies Serve as an E&I Trainer, mentoring and developing junior technicians.
Knowledge
in
both
electrical and instrumentation reliability programs.
Participate in failure investigations and provide technical
expertise
for root cause analysis.
Strict adherence to safety regulations, with professional competence in arc flash protection, lockout/tagout, and hazard analysis.
P
referred
Qualifi
cations & Experience
3
+ years’ experience in industrial Electrical & Instrumentation
Advanced knowledge of high, medium, and low voltage systems.
Proficiency
with both electrical power distribution and process instrumentation systems in heavy industrial environments.
Demonstrated success in troubleshooting complex issues, leading reliability initiatives, and training others.
Strong analytical skills
Physical Requirements Lift up to 55
lbs
without
assistance
Climb ladders (up to 15 ft) and multiple flights of stairs
Stand for up to 1 hour without sitting
Perform bending and twisting motions
Work flexible schedules and respond to on-call needs
Work Environment Exposure to mechanical parts, vibration, airborne particles, and loud noise
Work in both industrial and office settings
Outdoor work in inclement weather, heat, humidity, and dust
Use of standard office equipment (computers, phones, etc.)
FES Duty of Care Food Safety Ensure products meet food safety, legal, and quality standards
Environment Comply with
environmental procedures and report violations or near misses
Health & Safety Follow site safety policies and
participate
in safety programs