Bay
CLASS A CDL and NCCCO (or equivalent) required
The Crane Operator is responsible for operating a mobile or stationary crane to lift, move, position, and reposition loads while safely operating and transferring heavy objects from one location to another.
ESSENTIAL FUNCTIONS
Operate hydraulic and conventional crawler cranes from 80 to 1200 tons. Review and follow lift plan for proper loading/unloading of equipment/objects and selecting the appropriate crane confirmation to meet the lift requirements. Calculate load capacity, determine weight of items to be moved in relation to the maximum capacity of crane based on manufacturers specifications. Safely manipulate crane controls to regulate speed and direction of crane and hoist movement safely and according to written, verbal or signal instructions. Inspect clearances, overhead lines, and other possible obstructions to ensure there will be no accidents or damage to employees, buildings, loads, or equipment. Inspect and assesses ground conditions to ensure that the crane can be set up safely. Properly set up per the manufacturer's operators manual and company safety guidelines as required to perform job requirements. Inform supervision of any hazardous or dangerous conditions observed before or during crane operations. Receive direction from riggers and/or site supervision verbally or by hand signals to determine required load movement. Unload crane accessories from trailer(s) or support vehicle(s). Performs safety inspections of crane, wire rope, hooks, slings and rigging. Assess/monitor weather conditions prior to and during operations. Properly shutdown/secure the crane when unattended. Understand and properly fill out job ticket for customer to accept responsibility for jobsite and billing. Cease crane operations if an unsafe situation or condition is present. Follow appropriate safety procedures and maintain logs of vehicle repair status and working hours per Federal Motor Carrier Safety Administration (FMCSA). Perform routine maintenance, pre- and post-trip inspections along with daily and monthly equipment inspections inspecting cranes for defects and wear; performs necessary repairs or maintenance. Direct activities of truck drivers or helpers in setting up and knocking down crane equipment. Wear personal protective equipment (PPE) and properly barricades counterweight tail swing radius. Complies with all applicable federal, state, and company safety laws, guidelines, and best practices. Ensure compliance of all safety procedures and policies while promoting company's safety culture. Perform other duties as requested, directed, or assigned EDUCATION, CERTIFICATIONS, AVAILABILITY AND EXPERIENCE REQUIREMENTS
Minimum High School Diploma or GED required Valid class A CDL required Current NCCCO or equivalent crane operator certification required 3+ years of heavy crane operation required Possess valid state license to operate heavy equipment required Clean motor vehicle record Ability to pass pre-employment qualifications such as drug test, background check, and/or fit-for-duty test Overtime and weekend work required Local and out of town stay work SKILLS / KEY COMPETENCIES
Excellent verbal and written communication skills Knowledgeable of OSHA regulations pertaining to crane operations Excellent time-management skills to plan, organize, and prioritize tasks and responsibilities to meet deadlines and adjust to changing priorities Ability to work cooperatively across all levels delivering on commitments - results oriented Ability to complete work with a high degree of accuracy and attention to detail Ability to work under pressure to meet department targets and deadlines Able to work non-routine hours, when necessary Ability and willingness to travel as required PHYSICAL REQUIREMENTS
Ability to work outdoors, exposed to heat and humidity, cold and rain, and around heavy traffic areas Work long hours with moving about to accomplish tasks or moving from one worksite to another constantly perform repeating motions with feet, leg, wrists, hands and/or fingers to include walking, standing, kneeling, crouching, twisting, bending, gripping, climbing, depressing Excellent depth perception and reaction time Visual acuity to follow hand signals, maintain logs, and inspect and maintain machinery Ability to wear required and appropriate PPE equipment Occasionally exposed to extreme temperatures, fumes, or airborne particles Exposure to moderate noise level in the workplace Ability to operate job related tools Ability to frequently walk on uneven surfaces, including natural ground in varying weather conditions. Work that includes moving and/or lifting objects up to 50 pounds, carry at least 30 pounds and up to 150 pounds with help
Bay Ltd. is an Equal Opportunity Employer
The Crane Operator is responsible for operating a mobile or stationary crane to lift, move, position, and reposition loads while safely operating and transferring heavy objects from one location to another.
ESSENTIAL FUNCTIONS
Operate hydraulic and conventional crawler cranes from 80 to 1200 tons. Review and follow lift plan for proper loading/unloading of equipment/objects and selecting the appropriate crane confirmation to meet the lift requirements. Calculate load capacity, determine weight of items to be moved in relation to the maximum capacity of crane based on manufacturers specifications. Safely manipulate crane controls to regulate speed and direction of crane and hoist movement safely and according to written, verbal or signal instructions. Inspect clearances, overhead lines, and other possible obstructions to ensure there will be no accidents or damage to employees, buildings, loads, or equipment. Inspect and assesses ground conditions to ensure that the crane can be set up safely. Properly set up per the manufacturer's operators manual and company safety guidelines as required to perform job requirements. Inform supervision of any hazardous or dangerous conditions observed before or during crane operations. Receive direction from riggers and/or site supervision verbally or by hand signals to determine required load movement. Unload crane accessories from trailer(s) or support vehicle(s). Performs safety inspections of crane, wire rope, hooks, slings and rigging. Assess/monitor weather conditions prior to and during operations. Properly shutdown/secure the crane when unattended. Understand and properly fill out job ticket for customer to accept responsibility for jobsite and billing. Cease crane operations if an unsafe situation or condition is present. Follow appropriate safety procedures and maintain logs of vehicle repair status and working hours per Federal Motor Carrier Safety Administration (FMCSA). Perform routine maintenance, pre- and post-trip inspections along with daily and monthly equipment inspections inspecting cranes for defects and wear; performs necessary repairs or maintenance. Direct activities of truck drivers or helpers in setting up and knocking down crane equipment. Wear personal protective equipment (PPE) and properly barricades counterweight tail swing radius. Complies with all applicable federal, state, and company safety laws, guidelines, and best practices. Ensure compliance of all safety procedures and policies while promoting company's safety culture. Perform other duties as requested, directed, or assigned EDUCATION, CERTIFICATIONS, AVAILABILITY AND EXPERIENCE REQUIREMENTS
Minimum High School Diploma or GED required Valid class A CDL required Current NCCCO or equivalent crane operator certification required 3+ years of heavy crane operation required Possess valid state license to operate heavy equipment required Clean motor vehicle record Ability to pass pre-employment qualifications such as drug test, background check, and/or fit-for-duty test Overtime and weekend work required Local and out of town stay work SKILLS / KEY COMPETENCIES
Excellent verbal and written communication skills Knowledgeable of OSHA regulations pertaining to crane operations Excellent time-management skills to plan, organize, and prioritize tasks and responsibilities to meet deadlines and adjust to changing priorities Ability to work cooperatively across all levels delivering on commitments - results oriented Ability to complete work with a high degree of accuracy and attention to detail Ability to work under pressure to meet department targets and deadlines Able to work non-routine hours, when necessary Ability and willingness to travel as required PHYSICAL REQUIREMENTS
Ability to work outdoors, exposed to heat and humidity, cold and rain, and around heavy traffic areas Work long hours with moving about to accomplish tasks or moving from one worksite to another constantly perform repeating motions with feet, leg, wrists, hands and/or fingers to include walking, standing, kneeling, crouching, twisting, bending, gripping, climbing, depressing Excellent depth perception and reaction time Visual acuity to follow hand signals, maintain logs, and inspect and maintain machinery Ability to wear required and appropriate PPE equipment Occasionally exposed to extreme temperatures, fumes, or airborne particles Exposure to moderate noise level in the workplace Ability to operate job related tools Ability to frequently walk on uneven surfaces, including natural ground in varying weather conditions. Work that includes moving and/or lifting objects up to 50 pounds, carry at least 30 pounds and up to 150 pounds with help
Bay Ltd. is an Equal Opportunity Employer