Epsilon Systems Solutions, Inc
Corrosion Control Technician I
Epsilon Systems Solutions, Inc, San Diego, California, United States, 92189
Corrosion Control Technician I
Job ID:
2025-381 Date Posted:
2025-10-31T00:00:00 Location:
San Diego, California Minimum Experience:
1 year Education:
High School Diploma or Equivalent
Epsilon Systems Solutions, Inc. is seeking a full-time position for a Corrosion Control Technician I in San Diego, CA.
Summary: Support contractor personnel shall support the Corrosion Control Product Line/Shop in successfully accomplishing its mission to provide corrosion control services to U.S. Navy ships, shore commands, and other units in an attempt to extend the service life of shipboard components.
Duties and Responsibilities
Performs ship-checks
Performs shipboard pickups and drop-offs
Loads and unloads burn-off ovens
Sandblasts components
Sands, grinds, feather-ins, and vacuums
Masks, installs protection, and hangs components in preparation for powder coating
Powder coats components in accordance with the required technical specifications under instruction
Conducts blast profile, chloride, and coating thickness tests in accordance with SOP/UIPI under instruction
Removes masking and protection
Removes finished products and stage in the finished product area with protective wrapping
Loads finished products on truck for delivery
Delivers products to the piers or the ships as required, and occasionally the local shipyards
Uses and maintains the following equipment and instruments: Burn-off Ovens, Curing Ovens, Blast Booths, Powder Coating Booths, Compressors, Hopper's and Media, Gantry Crane, Fork Lift, Hydraulic Lift tables, Table Saw, wash down booth, Dip Tank, Fluidize Bed Tank, Decontamination Trailer, Coating Thickness Gauge, Infrared Thermometer, Dew Point Humidity Gauge, Single Rail Mobility Device (Monorail System).
Uses and maintains the following instruments: Abrasive blast nozzle, Powder coating gun, Powder coat panel, Micrometer, Press-o-film, Tape, Plugs, Rubber Mallet, Razor blade or knife, Sand paper, Pneumatic grinder and sander, Floor dolly, Tag machine, Wire cutters, Pyrometer, DS-108, Thickness gauge, Powder coat holiday detector, Hooks and wire, Automatic embossing machine system Matica C 400, Shop vacuum cleaner, Power floor sweeper.
Adheres to shops' Standard Operating Procedures for equipment and shop processes.
Washes down all products in wash down rack before burn process.
Follows all safety requirements in accordance with shop, SWRMC, and OSHA standards.
Assists any shop work stations in their responsibilities.
Recognizes proper equipment operation/s and reports any abnormal conditions (leaks, malfunctions, hose condition, lighting, calibration, e.g.)
Documents all in process square footage (blast only and finished goods).
Required Qualifications
High school diploma or equivalent.
Minimum 1 year of related experience
Knowledge of standard items, test procedures and test memos
Ability to read blueprints, technical manuals, and repair standards
Ability to use abrasive to blast all products using various blast media
Ability to powder coat all products using various types of coatings
Ability to qualify as a fork lift operator
Ability to obtain and DOD Secret Clearance
Preferred Qualifications
Military experience preferred
Pay Range The pay range for this role is $25.48-26.26 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.
ADA Limitations
Requires walking, reaching, sitting and concentration in the presence of occasional noise
Regular communication (hearing/speaking)
Ability to lift, carry and move objects up to 50 lbs. in weight
Ability to quickly move your hand, your hand together with your arm, or your two hands to grasp
Ability to stand, stoop, bend, kneel, and work in tiring and uncomfortable positions
Ability to wear a respirator
Frequently lifts, carries and helps setup tools, equipment, and parts that weigh up to 45 pounds
Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
#J-18808-Ljbffr
2025-381 Date Posted:
2025-10-31T00:00:00 Location:
San Diego, California Minimum Experience:
1 year Education:
High School Diploma or Equivalent
Epsilon Systems Solutions, Inc. is seeking a full-time position for a Corrosion Control Technician I in San Diego, CA.
Summary: Support contractor personnel shall support the Corrosion Control Product Line/Shop in successfully accomplishing its mission to provide corrosion control services to U.S. Navy ships, shore commands, and other units in an attempt to extend the service life of shipboard components.
Duties and Responsibilities
Performs ship-checks
Performs shipboard pickups and drop-offs
Loads and unloads burn-off ovens
Sandblasts components
Sands, grinds, feather-ins, and vacuums
Masks, installs protection, and hangs components in preparation for powder coating
Powder coats components in accordance with the required technical specifications under instruction
Conducts blast profile, chloride, and coating thickness tests in accordance with SOP/UIPI under instruction
Removes masking and protection
Removes finished products and stage in the finished product area with protective wrapping
Loads finished products on truck for delivery
Delivers products to the piers or the ships as required, and occasionally the local shipyards
Uses and maintains the following equipment and instruments: Burn-off Ovens, Curing Ovens, Blast Booths, Powder Coating Booths, Compressors, Hopper's and Media, Gantry Crane, Fork Lift, Hydraulic Lift tables, Table Saw, wash down booth, Dip Tank, Fluidize Bed Tank, Decontamination Trailer, Coating Thickness Gauge, Infrared Thermometer, Dew Point Humidity Gauge, Single Rail Mobility Device (Monorail System).
Uses and maintains the following instruments: Abrasive blast nozzle, Powder coating gun, Powder coat panel, Micrometer, Press-o-film, Tape, Plugs, Rubber Mallet, Razor blade or knife, Sand paper, Pneumatic grinder and sander, Floor dolly, Tag machine, Wire cutters, Pyrometer, DS-108, Thickness gauge, Powder coat holiday detector, Hooks and wire, Automatic embossing machine system Matica C 400, Shop vacuum cleaner, Power floor sweeper.
Adheres to shops' Standard Operating Procedures for equipment and shop processes.
Washes down all products in wash down rack before burn process.
Follows all safety requirements in accordance with shop, SWRMC, and OSHA standards.
Assists any shop work stations in their responsibilities.
Recognizes proper equipment operation/s and reports any abnormal conditions (leaks, malfunctions, hose condition, lighting, calibration, e.g.)
Documents all in process square footage (blast only and finished goods).
Required Qualifications
High school diploma or equivalent.
Minimum 1 year of related experience
Knowledge of standard items, test procedures and test memos
Ability to read blueprints, technical manuals, and repair standards
Ability to use abrasive to blast all products using various blast media
Ability to powder coat all products using various types of coatings
Ability to qualify as a fork lift operator
Ability to obtain and DOD Secret Clearance
Preferred Qualifications
Military experience preferred
Pay Range The pay range for this role is $25.48-26.26 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.
ADA Limitations
Requires walking, reaching, sitting and concentration in the presence of occasional noise
Regular communication (hearing/speaking)
Ability to lift, carry and move objects up to 50 lbs. in weight
Ability to quickly move your hand, your hand together with your arm, or your two hands to grasp
Ability to stand, stoop, bend, kneel, and work in tiring and uncomfortable positions
Ability to wear a respirator
Frequently lifts, carries and helps setup tools, equipment, and parts that weigh up to 45 pounds
Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
#J-18808-Ljbffr