Energy Jobline ZR
Quality Inspector - Electromechanical - Level 2 in Denver
Energy Jobline ZR, Denver, Colorado, United States, 80285
Energy Jobline is the largest and fastest growing global Energy Job Board and Energy Hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.
We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.
Job DescriptionJob DescriptionFor almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors.
Key Responsibilities
Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements.
Perform incoming inspections from external providers of products and services (e.g., nickel plating).
Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run).
Compile final inspection sign-off sheets and inspection packages.
Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent.
Review and validate the justification for parts not inspected at final inspection.
Audit and validate the execution of inspection plans as applicable.
Document non-conformances using approved methods and submit non-conformance reports for customer disposition.
Verify hardware cleanliness and absence of internal or external foreign object debris.
Verify fasteners are properly installed; assure torque stripe is continuous and of correct color.
Assure products are free of gaps, mismatches, fairing, and of acceptable contour and waviness.
Ensure products are of good workmanship and meet specified standards (e.g., oil canning, riding conditions, loose fasteners, drill starts, scratches, dings, burrs, fastener edge distance).
Review and validate First Article Inspection (FAI) documentation, including completeness, traceability, and compliance.
Ensure the protection and preservation of inspected products for subsequent processing and shipment.
Verify applicable shipping documentation for legibility and completeness, including part number, serial number, configuration change letter, and shipping destination.
Required Qualifications
Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise.
Proficiency in dimensional inspection of precision tolerance parts.
Strong knowledge and hands‑on experience with all inspection tools.
Ability to understand and interpret complex GD&T requirements and validate complex assemblies.
Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.).
To conform to U.S. Government export regulations, applicant must be a (i) U.S. or , (ii) U.S. lawful permanent (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.
Qualifications
Certified or previously certified in GD&T ASME Y-14.5.
5 years of experience in the manufacturing industry, with at least 2 years as a Mechanical Inspector.
Mileage Compensation ($0.70 per mile driven)
Note:
This position requires access to ITAR‑controlled technical data and/or defense articles. As such, the candidate must be a U.S. or U.S. lawful permanent (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role.
SQA Services is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by , color, , , origin, veteran status, , age, , , marital status, or any other legally protected status.
#ZR
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
If you are interested in applying for this job please press the Apply Button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.
#J-18808-Ljbffr
We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.
Job DescriptionJob DescriptionFor almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors.
Key Responsibilities
Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements.
Perform incoming inspections from external providers of products and services (e.g., nickel plating).
Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run).
Compile final inspection sign-off sheets and inspection packages.
Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent.
Review and validate the justification for parts not inspected at final inspection.
Audit and validate the execution of inspection plans as applicable.
Document non-conformances using approved methods and submit non-conformance reports for customer disposition.
Verify hardware cleanliness and absence of internal or external foreign object debris.
Verify fasteners are properly installed; assure torque stripe is continuous and of correct color.
Assure products are free of gaps, mismatches, fairing, and of acceptable contour and waviness.
Ensure products are of good workmanship and meet specified standards (e.g., oil canning, riding conditions, loose fasteners, drill starts, scratches, dings, burrs, fastener edge distance).
Review and validate First Article Inspection (FAI) documentation, including completeness, traceability, and compliance.
Ensure the protection and preservation of inspected products for subsequent processing and shipment.
Verify applicable shipping documentation for legibility and completeness, including part number, serial number, configuration change letter, and shipping destination.
Required Qualifications
Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise.
Proficiency in dimensional inspection of precision tolerance parts.
Strong knowledge and hands‑on experience with all inspection tools.
Ability to understand and interpret complex GD&T requirements and validate complex assemblies.
Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.).
To conform to U.S. Government export regulations, applicant must be a (i) U.S. or , (ii) U.S. lawful permanent (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.
Qualifications
Certified or previously certified in GD&T ASME Y-14.5.
5 years of experience in the manufacturing industry, with at least 2 years as a Mechanical Inspector.
Mileage Compensation ($0.70 per mile driven)
Note:
This position requires access to ITAR‑controlled technical data and/or defense articles. As such, the candidate must be a U.S. or U.S. lawful permanent (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role.
SQA Services is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by , color, , , origin, veteran status, , age, , , marital status, or any other legally protected status.
#ZR
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
If you are interested in applying for this job please press the Apply Button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.
#J-18808-Ljbffr