Airbus Helicopters, Inc.
Quality Inspector A (Contract)
Airbus Helicopters, Inc., Grand Prairie, Texas, United States, 75051
Job Description
This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America.
Airbus Helicopter's is looking for a Quality Inspector A to join the quality team in Grand Prairie, Texas.
In this role, you will be responsible for ensuring compliance with Airbus Helicopters Inc. policies, procedures and FAA/EASA regulations. You will perform preliminary, hidden damage, in-process and final inspections; perform receiving inspections approving or rejecting incoming materials through established receiving inspection processes while recording quality inspection results.
Meet The Team From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen.
Your Working Environment A suburb just outside the Dallas‑Fort Worth metropolitan area is home to Airbus Helicopters U.S. regional headquarters, where we have more than 1,000 employees. You may even see a special, custom Airbus helicopter dedicated to the Dallas Cowboys flying during home games.
Your Challenges Inspection: 60%
Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts
Perform in-process inspections for components in electrical back‑shop, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint
Perform detailed inspections of manufactured components such as but not limited to dimensional checks and acoustic tap testing
Inspect aircraft aluminum, titanium or steel structures for cracks, corrosion, damage and improper assembly
Determine proper shimming and joining of structures with rivets or other hardware in accordance with design drawings, engineering disposition, and other approved data
Detect hidden damage during inspections of airframe structures, components and sub‑assemblies that could occur during shipping, receiving, or manufacturing
Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings
Physically and systematically quarantine non‑conforming components and assemblies identified during inspections
Monitor the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle
Perform stock inspections/purges when notified of possible non‑conforming/suspected unapproved material
Evaluate and disposition sales returns
Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals
Accomplish in-process and final quality inspections for conformity, maintenance, repair, modification, rework and overhaul of aircraft components and sub‑assemblies
Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components
Inspect multiple airframe components to determine proper fit, form and function
Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data
Qualify dynamic component parts applying visual inspection and precision measurement methods
Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications
Ensure compliance with all applicable calendar/hourly inspections, life limited or cycle limited components, airworthiness directives and alert service bulletins
Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43
Documentation: 30%
Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories
Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness
Create, distribute, track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as directed
Create QN/NCs for non‑conforming material detected and coordinate with Quality Engineers on non‑conformity resolution
Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance)
Process Goods Receipts during receiving of material
Document applicable maintenance actions for airframe, engine, accessories and components in accordance with FAA and EASA approved regulations and company procedures
Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and/or components
Read and validate engineering drawings, reports, and test specifications
Properly identify and document items in quality quarantine cage
Document and prepare airframe, engine, accessories or components for return to service after production, maintenance, overhaul, repair, inspection, test or modification
Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems
Quality Department Support/Continuous Improvement: 10%
Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability
Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion
Review quality procedures, processes, documents and forms used during daily activities for accuracy and completeness
Ensure compliance with company policies, procedures and FAA & EASA Regulations
Support Company events, departmental meetings, special projects and team meetings
Demonstrate creativity by proposing innovations using lean methodologies to ensure that top company objectives (TCOs) are met
Your Boarding Pass
High School Diploma or equivalent
4 years of quality inspection on aircraft components and systems OR 6 years as a certificated aviation maintenance technician (AMT) on aircraft components systems
Current/Valid FAA Airframe & Power Plant License
(MUST HAVE)
15% Domestic and International travel expectation
Must be a US Person under ITAR definition (U.S. Citizen, green card holder or person covered under existing ITAR license)
Preferred Education/Skills
Associates Degree in Aviation or related industry
Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector
FAA Inspection Authorization (IA)
FCC 2nd Class License
Non Destructive Inspection (NDI) Certificate
SAP
Physical Requirements
Onsite: 100% unless on business travel
Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable
Hearing: able to hear to participate in conversations in person and via teleconference or phone and able to hear sounds on production floor including safety warnings or alarms daily
Speaking: able to speak in conversations and meetings, deliver information and participate in communications daily
Equipment Operation: able to operate most office and personal electronic equipment and some tools daily
Carrying: able to carry documents, tools, drawings, electronic equipment up to 30 lbs/14 kgs daily
Lifting: able to lift documents, tools, drawings, electronic equipment up to 30 lbs/14 kgs daily
Pushing / Pulling: able to push and pull small office furniture and some equipment and tools daily
Sitting: able to sit for long periods of time in meetings, working on computer several times a week
Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Daily
Standing: able to stand for discussions in offices or on production floor daily
Travel: able to travel independently and at short notice 15% or less yearly
Walking: able to walk through office and production areas including uneven surfaces daily
Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site
Take your career to a new level and apply online now!
A full job description will be provided to candidates who progress to the interview stage or any candidate upon request.
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.
Company Airbus Helicopters, Inc.
Employment Type: Agency / Temporary
Experience Level: Professional
Remote Type: On‑site
Job Family: Quality Inspection
Job Posting End Date: 11.15.2025
Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment. This assignment description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com.
#J-18808-Ljbffr
Airbus Helicopter's is looking for a Quality Inspector A to join the quality team in Grand Prairie, Texas.
In this role, you will be responsible for ensuring compliance with Airbus Helicopters Inc. policies, procedures and FAA/EASA regulations. You will perform preliminary, hidden damage, in-process and final inspections; perform receiving inspections approving or rejecting incoming materials through established receiving inspection processes while recording quality inspection results.
Meet The Team From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen.
Your Working Environment A suburb just outside the Dallas‑Fort Worth metropolitan area is home to Airbus Helicopters U.S. regional headquarters, where we have more than 1,000 employees. You may even see a special, custom Airbus helicopter dedicated to the Dallas Cowboys flying during home games.
Your Challenges Inspection: 60%
Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts
Perform in-process inspections for components in electrical back‑shop, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint
Perform detailed inspections of manufactured components such as but not limited to dimensional checks and acoustic tap testing
Inspect aircraft aluminum, titanium or steel structures for cracks, corrosion, damage and improper assembly
Determine proper shimming and joining of structures with rivets or other hardware in accordance with design drawings, engineering disposition, and other approved data
Detect hidden damage during inspections of airframe structures, components and sub‑assemblies that could occur during shipping, receiving, or manufacturing
Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings
Physically and systematically quarantine non‑conforming components and assemblies identified during inspections
Monitor the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle
Perform stock inspections/purges when notified of possible non‑conforming/suspected unapproved material
Evaluate and disposition sales returns
Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals
Accomplish in-process and final quality inspections for conformity, maintenance, repair, modification, rework and overhaul of aircraft components and sub‑assemblies
Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components
Inspect multiple airframe components to determine proper fit, form and function
Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data
Qualify dynamic component parts applying visual inspection and precision measurement methods
Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications
Ensure compliance with all applicable calendar/hourly inspections, life limited or cycle limited components, airworthiness directives and alert service bulletins
Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43
Documentation: 30%
Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories
Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness
Create, distribute, track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as directed
Create QN/NCs for non‑conforming material detected and coordinate with Quality Engineers on non‑conformity resolution
Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance)
Process Goods Receipts during receiving of material
Document applicable maintenance actions for airframe, engine, accessories and components in accordance with FAA and EASA approved regulations and company procedures
Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and/or components
Read and validate engineering drawings, reports, and test specifications
Properly identify and document items in quality quarantine cage
Document and prepare airframe, engine, accessories or components for return to service after production, maintenance, overhaul, repair, inspection, test or modification
Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems
Quality Department Support/Continuous Improvement: 10%
Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability
Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion
Review quality procedures, processes, documents and forms used during daily activities for accuracy and completeness
Ensure compliance with company policies, procedures and FAA & EASA Regulations
Support Company events, departmental meetings, special projects and team meetings
Demonstrate creativity by proposing innovations using lean methodologies to ensure that top company objectives (TCOs) are met
Your Boarding Pass
High School Diploma or equivalent
4 years of quality inspection on aircraft components and systems OR 6 years as a certificated aviation maintenance technician (AMT) on aircraft components systems
Current/Valid FAA Airframe & Power Plant License
(MUST HAVE)
15% Domestic and International travel expectation
Must be a US Person under ITAR definition (U.S. Citizen, green card holder or person covered under existing ITAR license)
Preferred Education/Skills
Associates Degree in Aviation or related industry
Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector
FAA Inspection Authorization (IA)
FCC 2nd Class License
Non Destructive Inspection (NDI) Certificate
SAP
Physical Requirements
Onsite: 100% unless on business travel
Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable
Hearing: able to hear to participate in conversations in person and via teleconference or phone and able to hear sounds on production floor including safety warnings or alarms daily
Speaking: able to speak in conversations and meetings, deliver information and participate in communications daily
Equipment Operation: able to operate most office and personal electronic equipment and some tools daily
Carrying: able to carry documents, tools, drawings, electronic equipment up to 30 lbs/14 kgs daily
Lifting: able to lift documents, tools, drawings, electronic equipment up to 30 lbs/14 kgs daily
Pushing / Pulling: able to push and pull small office furniture and some equipment and tools daily
Sitting: able to sit for long periods of time in meetings, working on computer several times a week
Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Daily
Standing: able to stand for discussions in offices or on production floor daily
Travel: able to travel independently and at short notice 15% or less yearly
Walking: able to walk through office and production areas including uneven surfaces daily
Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site
Take your career to a new level and apply online now!
A full job description will be provided to candidates who progress to the interview stage or any candidate upon request.
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.
Company Airbus Helicopters, Inc.
Employment Type: Agency / Temporary
Experience Level: Professional
Remote Type: On‑site
Job Family: Quality Inspection
Job Posting End Date: 11.15.2025
Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment. This assignment description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com.
#J-18808-Ljbffr