Chugach Government Solutions, LLC
Overview
Mechanical Engineer I position at Nova Space Solutions, LLC (a joint venture of Wolf Creek Federal Services, Inc. and Amentum Technology, Inc.). The role is located at NASA John C. Stennis Space Center, Mississippi. The ideal candidate will assist in the design and analysis of new test site, test facility systems or modifications to existing site. Responsibilities
Development of mechanical designs for construction of new or modification to existing facilities. Monitor and report weekly on the status of all current design projects; design schedule and actual cost. Prepare plans and specifications in conjunction with other project team members for construction packages. Develops fluid and thermal analysis models, component calibration models, and test data review packages in support of rocket propulsion testing. Participation in the entire design cycle of fluid subsystems including conceptual design, thermo-fluid modeling, structural layout and analysis, integration, and test and mission support. Designing and routing individual fluid subsystems (i.e. propellant feed, pressurization, pneumatics, discharge and capture) including discrepancy resolution. Designing fluid component groups (i.e. solenoid valves, regulators, pressure vessels) including specification, procurement, processing, and discrepancy resolution of specific components. Prepares plans and drawings using design software. Performs analyses, including dimensional, thermal, and structural, qualification, integration, etc., to assist in the identification of correct configuration, integrity and feasibility of design(s). Structural design and analysis of fluid subsystems including developing 3D models, assembly and detail drawings. Fluid component and subsystem and system level testing including test planning, test execution, data reduction, and data analysis. Project planning, scheduling, and cost estimation. Develop heat load analysis models, flow models, etc. as required for the design of facility systems (e.g., Cryogenic and gas systems). Assist in the review of vendor/contractor submittals, RFIs and change orders to bring product design from engineering phase to completed construction. Perform trade studies and conceptual design studies to support site-wide improvements. Assist other departments as needed with engineering support. Job Requirements
Mandatory:
Bachelor's degree in mechanical engineering from an ABET-accredited university MS degree in mechanical or aerospace engineering is a plus Working knowledge of fluid components such as valves, regulators, and fittings Knowledge of fabrication, integration processes and quality control relative to tubes/piping and machined components 1-4 years of experience in mechanical engineering Must be a U.S. Citizen in order to obtain required NASA badge Must be able to provide a certified Birth Certificate (with state seal), Passport, or INS Citizenship documents on date of hire Must have the ability to communicate the English language, both verbally and written, effectively Must have and maintain a valid driver’s license Must be able to lift and carry up to 50 lbs Dexterity to operate office equipment as required by the position Special Knowledge and Skills Required
Prior knowledge of NASA site; experience with government installations preferred Knowledge of software/codes (Visual BASIC, FORTRAN, C, etc.) a plus Experience in design of piping systems; knowledge of process piping standards (ASME B31.3) and pressure vessel codes (ASME BPVC Section VIII) is a plus Coursework or experience related to aerospace propulsion systems Good organizational and planning skills Good communication skills Ability to work independently but follow specific detailed instructions Ability to interface with various levels of personnel in a multi-cultural, team-oriented environment Proficient in the use of Microsoft Office (Word, Excel, PowerPoint) Ability to present to large groups Physical Requirements
Dexterity to operate office equipment, and ability to access field locations as required by the position Reasonable Accommodation
CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ada@chugachgov.com. Equal Employment Opportunity
Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law. Seniority level
Entry level Employment type
Full-time Job function
Engineering and Information Technology Industries Defense and Space Manufacturing Mississippi, United States – posted salary range and timing information were present in the source, but not required for the refined description.
#J-18808-Ljbffr
Mechanical Engineer I position at Nova Space Solutions, LLC (a joint venture of Wolf Creek Federal Services, Inc. and Amentum Technology, Inc.). The role is located at NASA John C. Stennis Space Center, Mississippi. The ideal candidate will assist in the design and analysis of new test site, test facility systems or modifications to existing site. Responsibilities
Development of mechanical designs for construction of new or modification to existing facilities. Monitor and report weekly on the status of all current design projects; design schedule and actual cost. Prepare plans and specifications in conjunction with other project team members for construction packages. Develops fluid and thermal analysis models, component calibration models, and test data review packages in support of rocket propulsion testing. Participation in the entire design cycle of fluid subsystems including conceptual design, thermo-fluid modeling, structural layout and analysis, integration, and test and mission support. Designing and routing individual fluid subsystems (i.e. propellant feed, pressurization, pneumatics, discharge and capture) including discrepancy resolution. Designing fluid component groups (i.e. solenoid valves, regulators, pressure vessels) including specification, procurement, processing, and discrepancy resolution of specific components. Prepares plans and drawings using design software. Performs analyses, including dimensional, thermal, and structural, qualification, integration, etc., to assist in the identification of correct configuration, integrity and feasibility of design(s). Structural design and analysis of fluid subsystems including developing 3D models, assembly and detail drawings. Fluid component and subsystem and system level testing including test planning, test execution, data reduction, and data analysis. Project planning, scheduling, and cost estimation. Develop heat load analysis models, flow models, etc. as required for the design of facility systems (e.g., Cryogenic and gas systems). Assist in the review of vendor/contractor submittals, RFIs and change orders to bring product design from engineering phase to completed construction. Perform trade studies and conceptual design studies to support site-wide improvements. Assist other departments as needed with engineering support. Job Requirements
Mandatory:
Bachelor's degree in mechanical engineering from an ABET-accredited university MS degree in mechanical or aerospace engineering is a plus Working knowledge of fluid components such as valves, regulators, and fittings Knowledge of fabrication, integration processes and quality control relative to tubes/piping and machined components 1-4 years of experience in mechanical engineering Must be a U.S. Citizen in order to obtain required NASA badge Must be able to provide a certified Birth Certificate (with state seal), Passport, or INS Citizenship documents on date of hire Must have the ability to communicate the English language, both verbally and written, effectively Must have and maintain a valid driver’s license Must be able to lift and carry up to 50 lbs Dexterity to operate office equipment as required by the position Special Knowledge and Skills Required
Prior knowledge of NASA site; experience with government installations preferred Knowledge of software/codes (Visual BASIC, FORTRAN, C, etc.) a plus Experience in design of piping systems; knowledge of process piping standards (ASME B31.3) and pressure vessel codes (ASME BPVC Section VIII) is a plus Coursework or experience related to aerospace propulsion systems Good organizational and planning skills Good communication skills Ability to work independently but follow specific detailed instructions Ability to interface with various levels of personnel in a multi-cultural, team-oriented environment Proficient in the use of Microsoft Office (Word, Excel, PowerPoint) Ability to present to large groups Physical Requirements
Dexterity to operate office equipment, and ability to access field locations as required by the position Reasonable Accommodation
CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ada@chugachgov.com. Equal Employment Opportunity
Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law. Seniority level
Entry level Employment type
Full-time Job function
Engineering and Information Technology Industries Defense and Space Manufacturing Mississippi, United States – posted salary range and timing information were present in the source, but not required for the refined description.
#J-18808-Ljbffr