Airtech Vacuum
Summary
The Quality Inspector Level I is responsible for performing standardized quality control checks on products to ensure they meet the required legal and company standards for safety and quality. Other requirements include maintaining calibrated test equipment and preparing test data.
Essential Duties And Responsibilities
Ensure parts are inspected to meet production goals, including cycle time, quantity and quality.
Operate Aberlink and Zeiss automated Coordinate Measuring Machine (CMM) software to measure and analyze data.
Accurately align parts on the CMM and identify relevant features for measurement.
Interpret CMM measurement data and identify potential quality issues.
Perform dimensional inspection as per applicable inspection plan. Measure and check dimensions and tolerances using measuring devices, including (but not limited to) calipers, micrometers and gauges.
Read and interpret basic engineering drawings.
Complete inspection reports with results as displayed on the equipment.
Record non-conforming material within the proper logs and alert supervisor as required.
Perform necessary transactions in ERP system to maintain accurate inventory.
Perform daily maintenance on CMM equipment; conduct routine checks to ensure equipment is within calibration and functioning safely and properly.
Maintain a clean and safe workplace. Perform daily 6S activities to ensure organization and cleanliness of work area.
Other duties as assigned
Education And/or Experience
High school diploma or GED or related experience and/or training: or equivalent combination of education and experience
2+ years of relevant experience in a high-volume manufacturing environment
Basic understanding on automated inspection equipment (CMM, vision system)
Basic understanding of Geometric Dimensioning and Tolerancing (GD&T) preferred
Previous experience working within an ISO9001 certified facility preferred
Qualifications
Proficient in the use of basic measuring equipment (caliper, micrometer, air gauge, etc.)
Ability to read and understand basic engineering drawings
Ability to assess visual drawing requirements
Ability to work alone with minimal supervision
Ability to collect data and interpret results
Must demonstrate a good attention to detail and the ability to communicate effectively both verbally and in writing
Basic math, computer, and keyboard skills to work within the ERP system
Must be 18 years of age or older
Must be authorized to work in the US
Physical Demands
Ability to lift up to 50 pounds.
Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.
Working Conditions
Shop floor working environment.
Employee may work in a loud environment.
Appropriate Personal Protective Equipment (PPE) is required at all times in the shop floor.
Noise Level is minimal with intervals of spikes.
Total Rewards The compensation range for this position is $35,800.00 - $53,600.00, depending on experience. This position may be eligible for performance based bonus plan.
Benefits Package Our comprehensive U.S. benefit offerings include: Health benefits, 401(k) retirement savings program with company match, PTO, and more. More information on our benefits and rewards can be found on our career page: https://www.idexcorp.com/careers/our-benefits-and-rewards/
IDEX is an Equal Opportunity Employer IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws.
Attention Applicants If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at lfcareers@idexcorp.com for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application.
Seniority Level Entry level
Employment Type Full-time
Job Function Quality Assurance
Industries Machinery Manufacturing
Job Family: Operations
Business Unit: Airtech
#J-18808-Ljbffr
Essential Duties And Responsibilities
Ensure parts are inspected to meet production goals, including cycle time, quantity and quality.
Operate Aberlink and Zeiss automated Coordinate Measuring Machine (CMM) software to measure and analyze data.
Accurately align parts on the CMM and identify relevant features for measurement.
Interpret CMM measurement data and identify potential quality issues.
Perform dimensional inspection as per applicable inspection plan. Measure and check dimensions and tolerances using measuring devices, including (but not limited to) calipers, micrometers and gauges.
Read and interpret basic engineering drawings.
Complete inspection reports with results as displayed on the equipment.
Record non-conforming material within the proper logs and alert supervisor as required.
Perform necessary transactions in ERP system to maintain accurate inventory.
Perform daily maintenance on CMM equipment; conduct routine checks to ensure equipment is within calibration and functioning safely and properly.
Maintain a clean and safe workplace. Perform daily 6S activities to ensure organization and cleanliness of work area.
Other duties as assigned
Education And/or Experience
High school diploma or GED or related experience and/or training: or equivalent combination of education and experience
2+ years of relevant experience in a high-volume manufacturing environment
Basic understanding on automated inspection equipment (CMM, vision system)
Basic understanding of Geometric Dimensioning and Tolerancing (GD&T) preferred
Previous experience working within an ISO9001 certified facility preferred
Qualifications
Proficient in the use of basic measuring equipment (caliper, micrometer, air gauge, etc.)
Ability to read and understand basic engineering drawings
Ability to assess visual drawing requirements
Ability to work alone with minimal supervision
Ability to collect data and interpret results
Must demonstrate a good attention to detail and the ability to communicate effectively both verbally and in writing
Basic math, computer, and keyboard skills to work within the ERP system
Must be 18 years of age or older
Must be authorized to work in the US
Physical Demands
Ability to lift up to 50 pounds.
Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.
Working Conditions
Shop floor working environment.
Employee may work in a loud environment.
Appropriate Personal Protective Equipment (PPE) is required at all times in the shop floor.
Noise Level is minimal with intervals of spikes.
Total Rewards The compensation range for this position is $35,800.00 - $53,600.00, depending on experience. This position may be eligible for performance based bonus plan.
Benefits Package Our comprehensive U.S. benefit offerings include: Health benefits, 401(k) retirement savings program with company match, PTO, and more. More information on our benefits and rewards can be found on our career page: https://www.idexcorp.com/careers/our-benefits-and-rewards/
IDEX is an Equal Opportunity Employer IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws.
Attention Applicants If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at lfcareers@idexcorp.com for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application.
Seniority Level Entry level
Employment Type Full-time
Job Function Quality Assurance
Industries Machinery Manufacturing
Job Family: Operations
Business Unit: Airtech
#J-18808-Ljbffr