Eaton
Manufacturing Technician I - 2nd Shift
Eaton, Fayetteville, North Carolina, United States, 28305
Join to apply for the
Manufacturing Technician I - 2nd Shift
role at
Eaton .
Eaton’s ES AMER ARS PDCAD division is currently seeking a Manufacturing Technician I - 2nd Shift.
Shift hours: 2:30pm - 11pm Monday - Friday (overtime may exceed these hours and can be mandatory at times).
The hourly rate for this position is $16.00 per hour, plus a $1/hour increase for 2nd shift. Salaries are based on candidate skills, experience, and qualifications, and business considerations.
What You’ll Do
Work from oral or written instructions from supervision and/or prints, inspection reports, manufacturing information sheets, and standard or near standard wiring diagrams.
Utilize manufacturing information sheets, determine necessary parts, write requisitions, and obtain materials from stock areas.
Read shop orders and drawings to determine assembly procedures such as component types and configuration, mounting locations and clearances required.
Assemble and fit parts and components to form sub-assemblies, or completed assemblies.
Assemble and wire control devices, cutting wires to length.
Make adjustments to ensure correct alignment and clearances.
Install units, pan assemblies and cover up steel, meters, kirk keys, pull boxes, reactors, relays, fuses, MTB assemblies, panel boards, space heaters, transformers, etc. by mounting/bolting into place. Assemble and install bus work such as lug adapters, cross over bus, splices, etc.
Make pre-bent cable unit, MTB and control panel harnesses using pre-cable boards, control panels and hand crimp lugs if necessary.
Modify standard assemblies or doors as received. May alter hole cutouts, etc. using hand or power tools.
Make wiring changes as required.
Use floor operated overhead and jib cranes to move units, harnesses, device panels, etc. from one area to another.
Determine quality of work, report problems to area supervisor or Quality Control personnel, maintain piece count and associated records where applicable.
Mark wires, devices or terminals as required. Identify harness and/or panels with job and unit number. Apply component ID labels such as "Brady Markers" or "Dymo" labels if required and maintain work records.
Wear all safety equipment and observe all hygiene requirements as specified and directed.
Qualifications Required (Basic) Qualifications
Must have a high school diploma or General Equivalency Degree (GED) from an accredited institution.
Eaton will not consider applicants for immigration sponsorship or support for this position.
No relocation benefit is being offered; candidates must reside within 50 miles of the work location (Active-Duty Military Service members are exempt).
Preferred Qualifications
Minimum of 3 months previous experience in a manufacturing environment.
Experience reading schematic drawings/blueprints.
Position Criteria
Work with individuals and groups to effectively participate within team environment.
Willing to work flexible hours and overtime in support of business needs.
Demonstrated comprehension of wiring diagrams and schematics.
Utilize various hand tools to assemble and wire products in a lean environment.
Self-driven and able to produce desired results with minimal direction.
Able to stand; walk; sit; reach at or above shoulder level; grip; and use hands to handle and feel.
Able to frequently lift/carry up to 35 pounds and push/pull up to 35 pounds.
Adequate far and close vision with depth perception and color discrimination.
Seniority level
Entry level
Employment type
Full-time
Job function
Other
Industries: Appliances, Electrical, and Electronics Manufacturing
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based on job-related reasons regardless of protected status. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered consistent with the Los Angeles County Fair Chance Ordinance and California Fair Chance Act. To request a disability-related reasonable accommodation, please call 1-800-836-6345. Eaton provides various health and welfare benefits, retirement benefits, and paid/unpaid time off. Please see Eaton Benefits Overview for detail.
#J-18808-Ljbffr
Manufacturing Technician I - 2nd Shift
role at
Eaton .
Eaton’s ES AMER ARS PDCAD division is currently seeking a Manufacturing Technician I - 2nd Shift.
Shift hours: 2:30pm - 11pm Monday - Friday (overtime may exceed these hours and can be mandatory at times).
The hourly rate for this position is $16.00 per hour, plus a $1/hour increase for 2nd shift. Salaries are based on candidate skills, experience, and qualifications, and business considerations.
What You’ll Do
Work from oral or written instructions from supervision and/or prints, inspection reports, manufacturing information sheets, and standard or near standard wiring diagrams.
Utilize manufacturing information sheets, determine necessary parts, write requisitions, and obtain materials from stock areas.
Read shop orders and drawings to determine assembly procedures such as component types and configuration, mounting locations and clearances required.
Assemble and fit parts and components to form sub-assemblies, or completed assemblies.
Assemble and wire control devices, cutting wires to length.
Make adjustments to ensure correct alignment and clearances.
Install units, pan assemblies and cover up steel, meters, kirk keys, pull boxes, reactors, relays, fuses, MTB assemblies, panel boards, space heaters, transformers, etc. by mounting/bolting into place. Assemble and install bus work such as lug adapters, cross over bus, splices, etc.
Make pre-bent cable unit, MTB and control panel harnesses using pre-cable boards, control panels and hand crimp lugs if necessary.
Modify standard assemblies or doors as received. May alter hole cutouts, etc. using hand or power tools.
Make wiring changes as required.
Use floor operated overhead and jib cranes to move units, harnesses, device panels, etc. from one area to another.
Determine quality of work, report problems to area supervisor or Quality Control personnel, maintain piece count and associated records where applicable.
Mark wires, devices or terminals as required. Identify harness and/or panels with job and unit number. Apply component ID labels such as "Brady Markers" or "Dymo" labels if required and maintain work records.
Wear all safety equipment and observe all hygiene requirements as specified and directed.
Qualifications Required (Basic) Qualifications
Must have a high school diploma or General Equivalency Degree (GED) from an accredited institution.
Eaton will not consider applicants for immigration sponsorship or support for this position.
No relocation benefit is being offered; candidates must reside within 50 miles of the work location (Active-Duty Military Service members are exempt).
Preferred Qualifications
Minimum of 3 months previous experience in a manufacturing environment.
Experience reading schematic drawings/blueprints.
Position Criteria
Work with individuals and groups to effectively participate within team environment.
Willing to work flexible hours and overtime in support of business needs.
Demonstrated comprehension of wiring diagrams and schematics.
Utilize various hand tools to assemble and wire products in a lean environment.
Self-driven and able to produce desired results with minimal direction.
Able to stand; walk; sit; reach at or above shoulder level; grip; and use hands to handle and feel.
Able to frequently lift/carry up to 35 pounds and push/pull up to 35 pounds.
Adequate far and close vision with depth perception and color discrimination.
Seniority level
Entry level
Employment type
Full-time
Job function
Other
Industries: Appliances, Electrical, and Electronics Manufacturing
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based on job-related reasons regardless of protected status. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered consistent with the Los Angeles County Fair Chance Ordinance and California Fair Chance Act. To request a disability-related reasonable accommodation, please call 1-800-836-6345. Eaton provides various health and welfare benefits, retirement benefits, and paid/unpaid time off. Please see Eaton Benefits Overview for detail.
#J-18808-Ljbffr