Howmet Aerospace
Processing Tech IV- 2nd Shift
Location: Fullerton, CA
Position Summary Under guidance of supervisor or trained personnel, set‑up and operate heat treating furnaces, baths, and quenching equipment to soften, harden, temper, anneal, case harden, normalize, or otherwise alter the physical or chemical properties of precision metal fasteners and tooling. Identify material samples, lots of fasteners, or tooling to be heat treated and obtain specifications for treatment required by reviewing materials and documents.
Essential Duties
Identify material samples, lots of fasteners, or tooling to be heat treated and obtain specifications for treatment required by reviewing materials and documents.
Segregate orders and material samples according to specified heat‑treat temperature, and place fasteners and samples into charge baskets and trays, organizing each charge for most efficient use of furnace. Record pertinent data on appropriate forms.
Set furnace controls to assure specified temperature, dew point, vacuum, timing, etc., and record settings on chart and/or production log.
Load charges onto conveyor or directly into furnace. Set controls.
Verify proper operation of furnace by observing pyrometer and other instruments on furnace. Adjust controls as required.
Remove charge trays from furnace after specified time.
Rinse, quench and/or cool materials and perform hardness test as required and record results on appropriate forms.
Remove treated materials from charge trays to appropriate pans or other containers.
Place travelling documents with completed work orders and move to holding area.
Heat‑treat material samples for laboratory testing and determination of effects of various temperatures on materials for future reference in heat‑treating products.
Record part and processing data on proper form on a daily basis.
Perform routine maintenance of heat‑treat equipment such as draining and replenishing water, oil, and solvents, checking contents of argon and nitrogen tanks and requesting replenishment, changing gas and air filters and flow raters.
Qualifications
High school diploma or GED (Preferred.)
Working knowledge in manufacturing and quality processes and procedures.
Ability to read and interpret blueprints, work instructions and policies and procedures.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position entails access to export‑controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items.
Preferred Qualifications
One year certificate from college or technical school; or three to six months related to experience and/or training; or equivalent combination and experience.
Must be able to monitor furnace and verify instrumentation.
Should be familiar with furnaces, generators and auxiliary equipment. Understand the procedures of loading, timing, heating and quenching.
Physical Demands
Must be able to lift/move 30 lbs. (may not exceed per EHS policies).
Able to work in extreme hot environment.
Must be able to stand for long periods of time.
Able to use a respirator occasionally.
Benefits & Salary The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $21.17 to $35.99.
About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about how Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.
Equal Opportunity Employer Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com.
Additional Information
Seniority level: Entry level
Employment type: Full‑time
Job function: Management and Manufacturing
Industries: Aviation and Aerospace Component Manufacturing
#J-18808-Ljbffr
Position Summary Under guidance of supervisor or trained personnel, set‑up and operate heat treating furnaces, baths, and quenching equipment to soften, harden, temper, anneal, case harden, normalize, or otherwise alter the physical or chemical properties of precision metal fasteners and tooling. Identify material samples, lots of fasteners, or tooling to be heat treated and obtain specifications for treatment required by reviewing materials and documents.
Essential Duties
Identify material samples, lots of fasteners, or tooling to be heat treated and obtain specifications for treatment required by reviewing materials and documents.
Segregate orders and material samples according to specified heat‑treat temperature, and place fasteners and samples into charge baskets and trays, organizing each charge for most efficient use of furnace. Record pertinent data on appropriate forms.
Set furnace controls to assure specified temperature, dew point, vacuum, timing, etc., and record settings on chart and/or production log.
Load charges onto conveyor or directly into furnace. Set controls.
Verify proper operation of furnace by observing pyrometer and other instruments on furnace. Adjust controls as required.
Remove charge trays from furnace after specified time.
Rinse, quench and/or cool materials and perform hardness test as required and record results on appropriate forms.
Remove treated materials from charge trays to appropriate pans or other containers.
Place travelling documents with completed work orders and move to holding area.
Heat‑treat material samples for laboratory testing and determination of effects of various temperatures on materials for future reference in heat‑treating products.
Record part and processing data on proper form on a daily basis.
Perform routine maintenance of heat‑treat equipment such as draining and replenishing water, oil, and solvents, checking contents of argon and nitrogen tanks and requesting replenishment, changing gas and air filters and flow raters.
Qualifications
High school diploma or GED (Preferred.)
Working knowledge in manufacturing and quality processes and procedures.
Ability to read and interpret blueprints, work instructions and policies and procedures.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position entails access to export‑controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items.
Preferred Qualifications
One year certificate from college or technical school; or three to six months related to experience and/or training; or equivalent combination and experience.
Must be able to monitor furnace and verify instrumentation.
Should be familiar with furnaces, generators and auxiliary equipment. Understand the procedures of loading, timing, heating and quenching.
Physical Demands
Must be able to lift/move 30 lbs. (may not exceed per EHS policies).
Able to work in extreme hot environment.
Must be able to stand for long periods of time.
Able to use a respirator occasionally.
Benefits & Salary The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $21.17 to $35.99.
About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about how Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.
Equal Opportunity Employer Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com.
Additional Information
Seniority level: Entry level
Employment type: Full‑time
Job function: Management and Manufacturing
Industries: Aviation and Aerospace Component Manufacturing
#J-18808-Ljbffr