Turbine Air Systems, Ltd.
Quality Control Inspector page is loaded## Quality Control Inspectorlocations:
US-Airport A (TAS)time type:
Full timeposted on:
Posted Yesterdayjob requisition id:
JR104404**POSITION OVERVIEW:**The Quality Control Inspector shall perform quality control inspection of structural and piping welding, piping fabrication and assembly of fabricated structures. The inspections shall consist of visual, dimensional, assembly, testing verification as well as some field inspection, if required.**KEY JOB RESPONSIBILITIES:*** Perform visual inspection of welded parts and assemblies in accordance with the applicable design requirements* Interprets Drawings, procedures, instructions, and specifications for determining the acceptance of the product undergoing examination* Perform dimensional inspection on piece parts and assemblies in accordance with applicable design documents within the manufacturing facility, at suppliers, or at the customer site* Monitor and records results of component testing (hydrostatic testing, coating etc.), witness, or process audits in accordance with documented procedures* Prepares nonconformance reports, where applicable, and completes all other documentation requirements* Ensure documentation of inspection and testing is performed* Assist in the training of other personnel as required by the appropriate management personnel or as required by the specific task being performed* Other responsibilities as assigned by TAS.**JOB SKILLS:*** Good writing skills.* Good organizational and communication skills.* Knowledge of MS Word, Excel, PowerPoint, and Outlook.* Ability to read and interpret documents such as drawings, safety rules, operating and maintenance instructions, procedures, and specifications.* Ability to communicate clearly, written and verbal, with various levels of management, customers, vendors, and other employees.* Ability to use basic mathematics in all units of measure, using whole numbers, common fractions, and decimals.* Ability to define problems collects data, establish facts, and draw valid conclusions.* Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.* Ability to use business software such as Microsoft Office etc.* Work with minimal supervision in the accomplishment of duties.**RELEVANT WORK EXPERIENCE****:*** Minimum of two years’ experience in quality assurance, quality control or quality management* Minimum of two years’ experience with ISO-9000 or similar quality management systems.* Minimum of two years’ experience with ASME Section VIII, IX, V, ASME B31.9, ASME B31.5, ISO-9000, AWS Dl .1, SSPC, or similar welding, construction, and Quality codes.**EDUCATION AND TRAINING****:*** High School Diploma or Equivalent* Associates Degree in Applied Science is a plus**MINIMUM REQUIREMENTS:*** Certified Quality Inspector required within one year of employment**PREFERRED REQUIREMENTS:*** Qualifications in NDE methods or a Certified level II* CWI or ACWI is a plus**PHYSICAL REQUIREMENTS/WORK ENVIRONMENT:**Ability to exert up to 30 pounds of force occasionally and/or negligible amount of force frequently, push, pull or otherwise move objects. Visual acuity requirements include color, depth perception and field of vision necessary to prepare and analyze data and figures, operate a computer terminal, and conduct extensive reading.**COMPANY OVERVIEW:**Join a team driven to excel in all that we do!
When you join TAS, you join a Houston-headquartered company that is part of a large Houston-headquartered publicly traded company, Comfort Systems USA, with a solid reputation built on outstanding value, integrity, and customer focus.
We offer our customers and employees the best of both worlds:
a small company feel with the resources, talent, process, and international reach of a large company.TAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, and commercial/industrial utility system applications.
TAS has successfully delivered and commissioned over 520 packages to over 33 countries.
The company is headquartered in Houston, TX and has five ISO 9001 certified manufacturing facilities in Houston, encompassing 1.2m sq. feet with proximity to major shipping ports and interstate highways.
TAS manages all logistics and transportation facilitating accelerated construction at customer’s facilities.TAS’ fastest growing business is the data center market.
By applying deep expertise in cooling, thermodynamics, and power, TAS has developed an entire product line that revolutionizes data center delivery.With our tremendous market potential, advanced technological systems, entrepreneurial culture as well as a talented and productive workforce, we continue to set and exceed aggressive market penetration and financial goals.
More information is available on the company website at: .*****IMPORTANT NOTICE**:*** *TAS has a tobacco-free workplace policy, under which individuals are not allowed to smoke or use tobacco or nicotine products on the TAS premises, while conducting TAS business off premises or take "smoking" breaks during working hours. “smoking” and “tobacco or nicotine products” includes, but is not limited to, product such as cigarettes, e-cigarettes, cigars, pipes, vaping, all forms of smokeless tobacco (chewing tobacco, snuff, dip) and clove cigarettes**The above declarations are not intended to be an all-inclusive list of the duties and responsibilities of the job described, nor are they intended to be such a listing of the skills and abilities required to do the job. Rather, they are intended only to describe the general nature of the job.**Applications and resumes will be kept on file for a limited time and that the Company is under no duty or obligation to contact applicants if they are not selected for the job applied for or if other jobs become available in the future. Applicants that desire to apply for a job that becomes available at the Company in the future, should submit a new employment application or resume.**TAS Energy Inc. guarantees equal employment opportunity to all qualified applicants. All qualified applicants will receive consideration for employment, without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.* #J-18808-Ljbffr
US-Airport A (TAS)time type:
Full timeposted on:
Posted Yesterdayjob requisition id:
JR104404**POSITION OVERVIEW:**The Quality Control Inspector shall perform quality control inspection of structural and piping welding, piping fabrication and assembly of fabricated structures. The inspections shall consist of visual, dimensional, assembly, testing verification as well as some field inspection, if required.**KEY JOB RESPONSIBILITIES:*** Perform visual inspection of welded parts and assemblies in accordance with the applicable design requirements* Interprets Drawings, procedures, instructions, and specifications for determining the acceptance of the product undergoing examination* Perform dimensional inspection on piece parts and assemblies in accordance with applicable design documents within the manufacturing facility, at suppliers, or at the customer site* Monitor and records results of component testing (hydrostatic testing, coating etc.), witness, or process audits in accordance with documented procedures* Prepares nonconformance reports, where applicable, and completes all other documentation requirements* Ensure documentation of inspection and testing is performed* Assist in the training of other personnel as required by the appropriate management personnel or as required by the specific task being performed* Other responsibilities as assigned by TAS.**JOB SKILLS:*** Good writing skills.* Good organizational and communication skills.* Knowledge of MS Word, Excel, PowerPoint, and Outlook.* Ability to read and interpret documents such as drawings, safety rules, operating and maintenance instructions, procedures, and specifications.* Ability to communicate clearly, written and verbal, with various levels of management, customers, vendors, and other employees.* Ability to use basic mathematics in all units of measure, using whole numbers, common fractions, and decimals.* Ability to define problems collects data, establish facts, and draw valid conclusions.* Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.* Ability to use business software such as Microsoft Office etc.* Work with minimal supervision in the accomplishment of duties.**RELEVANT WORK EXPERIENCE****:*** Minimum of two years’ experience in quality assurance, quality control or quality management* Minimum of two years’ experience with ISO-9000 or similar quality management systems.* Minimum of two years’ experience with ASME Section VIII, IX, V, ASME B31.9, ASME B31.5, ISO-9000, AWS Dl .1, SSPC, or similar welding, construction, and Quality codes.**EDUCATION AND TRAINING****:*** High School Diploma or Equivalent* Associates Degree in Applied Science is a plus**MINIMUM REQUIREMENTS:*** Certified Quality Inspector required within one year of employment**PREFERRED REQUIREMENTS:*** Qualifications in NDE methods or a Certified level II* CWI or ACWI is a plus**PHYSICAL REQUIREMENTS/WORK ENVIRONMENT:**Ability to exert up to 30 pounds of force occasionally and/or negligible amount of force frequently, push, pull or otherwise move objects. Visual acuity requirements include color, depth perception and field of vision necessary to prepare and analyze data and figures, operate a computer terminal, and conduct extensive reading.**COMPANY OVERVIEW:**Join a team driven to excel in all that we do!
When you join TAS, you join a Houston-headquartered company that is part of a large Houston-headquartered publicly traded company, Comfort Systems USA, with a solid reputation built on outstanding value, integrity, and customer focus.
We offer our customers and employees the best of both worlds:
a small company feel with the resources, talent, process, and international reach of a large company.TAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, and commercial/industrial utility system applications.
TAS has successfully delivered and commissioned over 520 packages to over 33 countries.
The company is headquartered in Houston, TX and has five ISO 9001 certified manufacturing facilities in Houston, encompassing 1.2m sq. feet with proximity to major shipping ports and interstate highways.
TAS manages all logistics and transportation facilitating accelerated construction at customer’s facilities.TAS’ fastest growing business is the data center market.
By applying deep expertise in cooling, thermodynamics, and power, TAS has developed an entire product line that revolutionizes data center delivery.With our tremendous market potential, advanced technological systems, entrepreneurial culture as well as a talented and productive workforce, we continue to set and exceed aggressive market penetration and financial goals.
More information is available on the company website at: .*****IMPORTANT NOTICE**:*** *TAS has a tobacco-free workplace policy, under which individuals are not allowed to smoke or use tobacco or nicotine products on the TAS premises, while conducting TAS business off premises or take "smoking" breaks during working hours. “smoking” and “tobacco or nicotine products” includes, but is not limited to, product such as cigarettes, e-cigarettes, cigars, pipes, vaping, all forms of smokeless tobacco (chewing tobacco, snuff, dip) and clove cigarettes**The above declarations are not intended to be an all-inclusive list of the duties and responsibilities of the job described, nor are they intended to be such a listing of the skills and abilities required to do the job. Rather, they are intended only to describe the general nature of the job.**Applications and resumes will be kept on file for a limited time and that the Company is under no duty or obligation to contact applicants if they are not selected for the job applied for or if other jobs become available in the future. Applicants that desire to apply for a job that becomes available at the Company in the future, should submit a new employment application or resume.**TAS Energy Inc. guarantees equal employment opportunity to all qualified applicants. All qualified applicants will receive consideration for employment, without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.* #J-18808-Ljbffr