Precision Castparts Corp. (PCC)
Quality Technician - Level 1 (1st Shift)
Precision Castparts Corp. (PCC), San Leandro, California, United States, 94579
Location
United States of America, California, San Leandro
Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description GENERAL PURPOSE
Under general supervision, marks parts and performs pre-packing functions on castings to assure conformance of casting to customer requirements following established safety and operating procedures in accordance with quality standards. Ensures that documentation, tooling and parts are correctly matched to paperwork.
ESSENTIAL FUNCTIONS
Inspector Visual (FID) Objective: To set up and perform marking, pre-packing, and packing functions on castings conforming to visual and dimensional specifications on technique cards.
Follow established housekeeping and safety practices to maintain the quality of the work.
Demonstrate ability to log on main computer system, extract information, log time, enter inventory amount and forward to next operation.
Program, design tooling, and perform set‑ups of pin marking equipment, and offer instruction to lesser skilled people.
Transport castings into and out of FID, responsibility for verification of proper paper work for the area.
Understand the Divisional Quality Policy, identify the location of the QCP'S, Quality System Manual, and OPC's and display a willingness and interest to learn through on the job training.
Identify, mark castings, and inventory area stamps as required by specification, instructions, and/or tech cards.
Count parts to ensure proper number of castings are sent to customer.
Complete all necessary paperwork and records as required and verify correct procedures of those lesser skilled.
Offer procedural improvements to Supervisor and assist other personnel as may be required.
Be responsible for calibration of all equipment in area (maintain appropriate records), and address any discrepancies in counts or improper stamps, following QCPs and OPCs, or out of date marking conditions.
Identify and mark castings as required by specification, instructions, and/or tech cards.
Report any discrepancies, or out of date marking condition to supervisor.
Be able to operate pin marking equipment, vibro‑etcher, and electro‑etcher.
Perform most marking jobs without instructions from the area lead.
Maintain an excellent part marking proficiency with zero tolerance for error.
Successfully comply with Customer Acceptance Criteria on a consistent basis.
Research pertinent data to support the generation of accurate tech cards for the department.
Understand and explain all paperwork associated with the job and demonstrate a high rate of accuracy in completing all required documents, including scrap/rework tickets, PCAR's, DCAR's, travelers, and daily "WIP" reports.
Pack castings according to customer requirements, without direct supervision, to preclude damage in shipment.
Perform all other duties assigned.
Qualifications
Experience and/or training are included in considerations.
Ability to communicate effectively in English, both verbally and in writing, read, follows and interprets instructions on technique cards, code sheets as well as other verbal or written instructions.
Ability to perform basic mathematical calculations.
Ability to use simple to complex measuring devices and fixtures.
Physical ability to perform the essential job functions.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
For informational purposes only, the range of pay for this role is $19.25 to $28.75 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company’s medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.
#J-18808-Ljbffr
Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description GENERAL PURPOSE
Under general supervision, marks parts and performs pre-packing functions on castings to assure conformance of casting to customer requirements following established safety and operating procedures in accordance with quality standards. Ensures that documentation, tooling and parts are correctly matched to paperwork.
ESSENTIAL FUNCTIONS
Inspector Visual (FID) Objective: To set up and perform marking, pre-packing, and packing functions on castings conforming to visual and dimensional specifications on technique cards.
Follow established housekeeping and safety practices to maintain the quality of the work.
Demonstrate ability to log on main computer system, extract information, log time, enter inventory amount and forward to next operation.
Program, design tooling, and perform set‑ups of pin marking equipment, and offer instruction to lesser skilled people.
Transport castings into and out of FID, responsibility for verification of proper paper work for the area.
Understand the Divisional Quality Policy, identify the location of the QCP'S, Quality System Manual, and OPC's and display a willingness and interest to learn through on the job training.
Identify, mark castings, and inventory area stamps as required by specification, instructions, and/or tech cards.
Count parts to ensure proper number of castings are sent to customer.
Complete all necessary paperwork and records as required and verify correct procedures of those lesser skilled.
Offer procedural improvements to Supervisor and assist other personnel as may be required.
Be responsible for calibration of all equipment in area (maintain appropriate records), and address any discrepancies in counts or improper stamps, following QCPs and OPCs, or out of date marking conditions.
Identify and mark castings as required by specification, instructions, and/or tech cards.
Report any discrepancies, or out of date marking condition to supervisor.
Be able to operate pin marking equipment, vibro‑etcher, and electro‑etcher.
Perform most marking jobs without instructions from the area lead.
Maintain an excellent part marking proficiency with zero tolerance for error.
Successfully comply with Customer Acceptance Criteria on a consistent basis.
Research pertinent data to support the generation of accurate tech cards for the department.
Understand and explain all paperwork associated with the job and demonstrate a high rate of accuracy in completing all required documents, including scrap/rework tickets, PCAR's, DCAR's, travelers, and daily "WIP" reports.
Pack castings according to customer requirements, without direct supervision, to preclude damage in shipment.
Perform all other duties assigned.
Qualifications
Experience and/or training are included in considerations.
Ability to communicate effectively in English, both verbally and in writing, read, follows and interprets instructions on technique cards, code sheets as well as other verbal or written instructions.
Ability to perform basic mathematical calculations.
Ability to use simple to complex measuring devices and fixtures.
Physical ability to perform the essential job functions.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
For informational purposes only, the range of pay for this role is $19.25 to $28.75 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company’s medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.
#J-18808-Ljbffr