Howmet Aerospace
Quality Tech III, Quality Specialist
Howmet Aerospace, California, Missouri, United States, 65018
Location
City of Industry, CA
Summary Howmet Fastening Systems (HFS) is seeking a Quality Tech III, Quality Specialist at our aerospace manufacturing facility in City of Industry, CA. Under general supervision performs inspection and calibration of gauges and tooling. Maintains all record and documentation pertaining to calibration system.
Essential Duties and Responsibilities
Good communication skills & know basic shop math
Ability to work in fast paced environment
Basic understanding of work instructions, routers, blueprints, drawings, and specifications in English
Ability to write routine reports and correspondence as required
Able to lift/move up to 30 pounds regularly
Able to follow and carry out instructions
Must be detailed oriented
Become familiar with the Daily Management board and understand covered topics as required
Basic computer skills
Ability to use/be trained on proper use and reading of micrometers and calipers
Must be able to pass vision test
Able to perform dimensional inspection of all characteristics of manufactured products
General knowledge of manufacturing operations and each department identification methods and requirements
Prepare inspection documentation
Demonstration of problem-solving techniques and ideas
Able to train Quality Tech I-III as required
Able to cross-train in other Quality activities as required
Able to write internal rejections for Quality Manufacturing and Vendors
General understanding of PRB process
Able to cross train in other Quality departments as required
Able to inspects samples under black light to detect defects such as discontinuity of seams, thread laps, non-metallic and metallic (NDT) inclusions, piping, grinding checks, cracks, etc. (NDT)
Able to work with calibration software
Support Quality Certs or Inspection when required
Performs inspection and calibrates all in-house gauges and tools used for product acceptance.
Maintains documentation and evidence of calibration on all tools and gauges.
Assist manufacturing and inspection with the recall of gauges.
Coordinates with procurement on gauges which require outside calibration.
Schedules outside suppliers for calibration of in-house tools, gauges and equipment.
Reviews calibration results for tightening or reducing of calibration frequency.
Run detailed First Article Inspections using tools like micrometers, calipers, thread gauges, and optical comparators
Read and interpret engineering drawings and blueprints using GD&T
Dig into supplier and customer issues to identify root causes and drive resolutions
Handle customer claims and rejections through quality portals
Accurately log non-conformances and inspection results in SAP and Excel
Take the lead or support during internal and external audits, including supplier corrective actions
Work closely with teams across Production, Sales, Customer Service, and Quality to keep things running smoothly
Share your knowledge and help train Level I-III Inspectors
Qualifications Basic Qualifications
Experience with tools like micrometers, calipers, ring/thread gauges, CMM, and optical comparators
Familiar with AS9100, AS9102, ISO 9001, FAI's and customer quality requirements
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this option
This position is subject to the International Traffic in Arms Regulation (ITAR) which requires U.S. Person status. ITAR defines U.S. person as a U.S. citizen, U.S. Permanent Resident (ie. Green Card Holder), Political Asylee, or Refugee
Preferred Qualifications
Internal auditor certifications (AS9100 or ASQ CQA/CQI) a plus
SAE or similar inspection certifications preferred
High School diploma or GED preferred
Benefits The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $25.00 to $35.00.
About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and the making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.
Equal Opportunity Employer Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com
About The Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.
#J-18808-Ljbffr
Summary Howmet Fastening Systems (HFS) is seeking a Quality Tech III, Quality Specialist at our aerospace manufacturing facility in City of Industry, CA. Under general supervision performs inspection and calibration of gauges and tooling. Maintains all record and documentation pertaining to calibration system.
Essential Duties and Responsibilities
Good communication skills & know basic shop math
Ability to work in fast paced environment
Basic understanding of work instructions, routers, blueprints, drawings, and specifications in English
Ability to write routine reports and correspondence as required
Able to lift/move up to 30 pounds regularly
Able to follow and carry out instructions
Must be detailed oriented
Become familiar with the Daily Management board and understand covered topics as required
Basic computer skills
Ability to use/be trained on proper use and reading of micrometers and calipers
Must be able to pass vision test
Able to perform dimensional inspection of all characteristics of manufactured products
General knowledge of manufacturing operations and each department identification methods and requirements
Prepare inspection documentation
Demonstration of problem-solving techniques and ideas
Able to train Quality Tech I-III as required
Able to cross-train in other Quality activities as required
Able to write internal rejections for Quality Manufacturing and Vendors
General understanding of PRB process
Able to cross train in other Quality departments as required
Able to inspects samples under black light to detect defects such as discontinuity of seams, thread laps, non-metallic and metallic (NDT) inclusions, piping, grinding checks, cracks, etc. (NDT)
Able to work with calibration software
Support Quality Certs or Inspection when required
Performs inspection and calibrates all in-house gauges and tools used for product acceptance.
Maintains documentation and evidence of calibration on all tools and gauges.
Assist manufacturing and inspection with the recall of gauges.
Coordinates with procurement on gauges which require outside calibration.
Schedules outside suppliers for calibration of in-house tools, gauges and equipment.
Reviews calibration results for tightening or reducing of calibration frequency.
Run detailed First Article Inspections using tools like micrometers, calipers, thread gauges, and optical comparators
Read and interpret engineering drawings and blueprints using GD&T
Dig into supplier and customer issues to identify root causes and drive resolutions
Handle customer claims and rejections through quality portals
Accurately log non-conformances and inspection results in SAP and Excel
Take the lead or support during internal and external audits, including supplier corrective actions
Work closely with teams across Production, Sales, Customer Service, and Quality to keep things running smoothly
Share your knowledge and help train Level I-III Inspectors
Qualifications Basic Qualifications
Experience with tools like micrometers, calipers, ring/thread gauges, CMM, and optical comparators
Familiar with AS9100, AS9102, ISO 9001, FAI's and customer quality requirements
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this option
This position is subject to the International Traffic in Arms Regulation (ITAR) which requires U.S. Person status. ITAR defines U.S. person as a U.S. citizen, U.S. Permanent Resident (ie. Green Card Holder), Political Asylee, or Refugee
Preferred Qualifications
Internal auditor certifications (AS9100 or ASQ CQA/CQI) a plus
SAE or similar inspection certifications preferred
High School diploma or GED preferred
Benefits The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $25.00 to $35.00.
About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and the making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.
Equal Opportunity Employer Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com
About The Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.
#J-18808-Ljbffr