Garlock Family of Companies
KLZ Press Operator/ Finisher (10pm-6am)
Garlock Family of Companies, Palmyra, New York, United States
Join to apply for the
KLZ Press Operator / Finisher (10pm-6am)
role at
Garlock Family of Companies .
Schedule 3rd Shift: 10:00 PM – 6:00 AM
Benefits
$22.84 per hour + 1.50 shift differential
Medical, dental, vision, and prescription coverage for employee plus eligible dependents
Employer matching up to 6% for 401K
Employee Assistance Programs
On‑site Fitness Center
Life and AD & D insurance, dependent life insurance, long term disability, and HSA, FSA
Tuition Assistance eligibility, and much more!
Essential Functions
Operate a series of electric/hydraulic presses in various molding operations consisting of long or short production runs of products made of various rubber compounds or a combination of rubber, spring, fabric and/or metal blanks.
Complete opening of press/mold by various manual means and close partially by manual means and pushing control buttons.
Perform duties that include: Raises and lowers presses.
Applies mold release to cavities as per work instructions.
Inserts blanks in mold cavities by hand.
Inserts Mold in/out press.
Cures stock for prescribed length of time.
Removes finished molded pieces from mold cavities, rough pick and deposit in provided containers as per work instruction.
Use care in loading molds to insure that metal or rubber blanks are properly positioned. Quality inspection responsibilities will become paramount throughout molding cycle.
Determine and implement corrective actions when defects occur with product and notify Supervision and/or Engineering when unable to correct defect.
Audit pre‑molded blanks for defects and proper weights during initial start‑up.
Inform Supervisor and/or Engineering of defective conditions concerning pre‑molded blanks. Assist and suggest ways to correct defects.
Inspect finished molded pieces, using visual inspection or gauges as required.
Provide input and data as required for metrics.
Verify mold release correctness.
Verify receipt, pressures, cure times and temperatures on product masters when presses are in operation, and alert to any changes.
Work with Supervision and Tech Aides to assure product master correctness, including trial runs, data gathering and verbal communication as to progress status.
Perform various finishing operations (manual or machine) on molded rubber items and other miscellaneous items in order to prepare them for shipment.
Work closely with Engineering personnel in the development and establishment of standard operating data relative to new and/or experimental products.
Move all finished work to proper center and record production and sign off each completed router step.
Maintain equipment, clean and lubricate machines, empty dust collectors and refuse containers.
Miscellaneous functions such as rough picking and stacking of parts will be an essential duty of the operator. May assist in finishing operation as directed.
Monitor pressure changes, vacuum changes, proper functioning of mechanical lubricating system, temperature readings, bumps, and pre‑heat cycle to provide input and correct product masters if improprieties exist.
Perform lock‑out/tag‑out process and clean presses.
Weigh extrusion blanks, measure critical dimensions like O.D. to ensure proper quality. Record and chart measurements.
Other Responsibilities
Maintain stock tote pans or containers in neat and orderly fashion.
Collect data and provide input to supervision and/or Engineering regarding proper data codes, stock availability and mold conditions.
Troubleshoot process as corrective action when defects occur with product; assist and suggest ways to correct defects.
Adhere to all plant safety guidelines.
Keep work area in 5S condition.
Perform other jobs as assigned by Supervisor.
Job Qualifications
High school degree completed or equivalent (GED) required.
Previous manufacturing experience preferred.
Physical Requirements
POSTURE:
Standing, leaning, reaching
MAXIMUM WEIGHT TO BE LIFTED : up to 35 lbs; anything over 35 lbs must be lifted by two people or appropriate lifting equipment.
FREQUENCY PER SHIFT:
25%
REPETITIVE MOTION TASKS:
Arm/shoulder movement when loading & unloading molds, lifting & lowering mold covers, pushing and pulling molds.
DURATION OF SHIFT:
80%
OTHER:
Potential burns, knife cuts, finger pinching.
WORKING CONDITIONS:
Heat, fumes, noise.
EEO Statement At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.
This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. The use of a particular expression or illustration describing duties shall not be held to exclude other duties not mentioned. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Garlock.
Seniority Level Entry level
Employment Type Part‑time
Job Function Management and Manufacturing
Industries Industrial Machinery Manufacturing
#Garlock
#J-18808-Ljbffr
KLZ Press Operator / Finisher (10pm-6am)
role at
Garlock Family of Companies .
Schedule 3rd Shift: 10:00 PM – 6:00 AM
Benefits
$22.84 per hour + 1.50 shift differential
Medical, dental, vision, and prescription coverage for employee plus eligible dependents
Employer matching up to 6% for 401K
Employee Assistance Programs
On‑site Fitness Center
Life and AD & D insurance, dependent life insurance, long term disability, and HSA, FSA
Tuition Assistance eligibility, and much more!
Essential Functions
Operate a series of electric/hydraulic presses in various molding operations consisting of long or short production runs of products made of various rubber compounds or a combination of rubber, spring, fabric and/or metal blanks.
Complete opening of press/mold by various manual means and close partially by manual means and pushing control buttons.
Perform duties that include: Raises and lowers presses.
Applies mold release to cavities as per work instructions.
Inserts blanks in mold cavities by hand.
Inserts Mold in/out press.
Cures stock for prescribed length of time.
Removes finished molded pieces from mold cavities, rough pick and deposit in provided containers as per work instruction.
Use care in loading molds to insure that metal or rubber blanks are properly positioned. Quality inspection responsibilities will become paramount throughout molding cycle.
Determine and implement corrective actions when defects occur with product and notify Supervision and/or Engineering when unable to correct defect.
Audit pre‑molded blanks for defects and proper weights during initial start‑up.
Inform Supervisor and/or Engineering of defective conditions concerning pre‑molded blanks. Assist and suggest ways to correct defects.
Inspect finished molded pieces, using visual inspection or gauges as required.
Provide input and data as required for metrics.
Verify mold release correctness.
Verify receipt, pressures, cure times and temperatures on product masters when presses are in operation, and alert to any changes.
Work with Supervision and Tech Aides to assure product master correctness, including trial runs, data gathering and verbal communication as to progress status.
Perform various finishing operations (manual or machine) on molded rubber items and other miscellaneous items in order to prepare them for shipment.
Work closely with Engineering personnel in the development and establishment of standard operating data relative to new and/or experimental products.
Move all finished work to proper center and record production and sign off each completed router step.
Maintain equipment, clean and lubricate machines, empty dust collectors and refuse containers.
Miscellaneous functions such as rough picking and stacking of parts will be an essential duty of the operator. May assist in finishing operation as directed.
Monitor pressure changes, vacuum changes, proper functioning of mechanical lubricating system, temperature readings, bumps, and pre‑heat cycle to provide input and correct product masters if improprieties exist.
Perform lock‑out/tag‑out process and clean presses.
Weigh extrusion blanks, measure critical dimensions like O.D. to ensure proper quality. Record and chart measurements.
Other Responsibilities
Maintain stock tote pans or containers in neat and orderly fashion.
Collect data and provide input to supervision and/or Engineering regarding proper data codes, stock availability and mold conditions.
Troubleshoot process as corrective action when defects occur with product; assist and suggest ways to correct defects.
Adhere to all plant safety guidelines.
Keep work area in 5S condition.
Perform other jobs as assigned by Supervisor.
Job Qualifications
High school degree completed or equivalent (GED) required.
Previous manufacturing experience preferred.
Physical Requirements
POSTURE:
Standing, leaning, reaching
MAXIMUM WEIGHT TO BE LIFTED : up to 35 lbs; anything over 35 lbs must be lifted by two people or appropriate lifting equipment.
FREQUENCY PER SHIFT:
25%
REPETITIVE MOTION TASKS:
Arm/shoulder movement when loading & unloading molds, lifting & lowering mold covers, pushing and pulling molds.
DURATION OF SHIFT:
80%
OTHER:
Potential burns, knife cuts, finger pinching.
WORKING CONDITIONS:
Heat, fumes, noise.
EEO Statement At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.
This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. The use of a particular expression or illustration describing duties shall not be held to exclude other duties not mentioned. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Garlock.
Seniority Level Entry level
Employment Type Part‑time
Job Function Management and Manufacturing
Industries Industrial Machinery Manufacturing
#Garlock
#J-18808-Ljbffr