Ameren Corporation
Electrical Repairman (Industrial Electrician)
Ameren Corporation, Saint Louis, Missouri, United States, 63146
## **Location:** Labadie, MO (Franklin County) — near Washington and Gray Summit**Facility:** Labadie Energy Center### ### **About the Facility**This role is based at **Labadie Energy Center**, one of Missouri’s largest power generation facilities—producing approximately **2,390 MW** of electricity across four high-capacity steam turbine units. Inside, you’ll find expansive turbine halls with soaring ceilings, advanced steam systems, and dedicated maintenance shops designed for heavy industrial equipment, along with secure control centers—creating a dynamic environment for repair and technical work.### ### **Summary**Under direct, indirect, or intermittent supervision, and working a **rotating shift schedule or day schedule** as required, you will install, repair, overhaul, and maintain a **general range of power plant electrical systems and equipment**. You may have immediate responsibility at times for the **working direction of an apprentice**.### **Key Duties*** Perform installation, maintenance, repair, and overhaul of electrical equipment including:
Generators, voltage regulator rheostats, exciters, buses & bus duct, transformers, circuit breakers, switches, power circuits, magnetic contactors, motors & motor starters, precipitators, batteries, plant lighting, conduit, wiring, boxes, supports, and hangers.* Work from schematics, drawings, and sketches.* Execute Workman’s Protection Assurance (WPA) and related procedures to ensure proper isolation and protection of equipment prior to work.* On energized equipment, ensure safety devices are in place and understood before work starts.* Obtain materials from storeroom; set up rigging and operate lifting equipment.* Erect and work from scaffolds.* Operate/use mobile equipment, shop equipment, portable power tools, hand tools, and test equipment.* Operate acetylene or other cutting/heating torches; check for explosive gases before use when necessary.* Prepare reports of work performed (including sketches if needed) and complete forms as required.* Work alone or in combination with **Electrical Repairman** or **Repairman (Mechanic)** classifications as assigned.* Perform similar and less skilled work as required.### ### **Safety & Accountability (Special Responsibilities)*** Carry out prescribed safety precautions and safeguards for personal and team protection.* Ensure safety of others when working on energized circuits; enforce safety instructions for anyone temporarily under your direction.* Perform work without disturbing other equipment; execute orders quickly and properly.* Maintain accuracy within required tolerances/specifications and exercise special care to avoid errors in repair/assembly.* Use tools, materials, and equipment properly; dispose of surplus/scrap materials appropriately.* Keep work areas clean and orderly to promote good work practices and safety.### **Cross-Functional Contacts**Work collaboratively with **Dispatchers, Meter & Relay personnel, Plant Operations, Maintenance, and Storeroom** supervision and personnel.### **Working Conditions*** Full range of temperatures from **very hot to sub-freezing**; sudden changes may occur.* Exposure to noise, dust, dirt, fumes, odors, drafts, and inclement weather.* Work in **cramped** and artificial light conditions is frequently necessary.### ### **Hazards*** Possible **electrical shocks, burns, or flashes** when working on/near energized equipment.* Hazards from possible failure of nearby equipment; danger from **falls** when working at elevation.* Usual hazards encountered in electrical construction/maintenance; occasional exposure to **noxious fumes** in confined spaces.### **Qualifications*** **High School Diploma or GED**
**AND either:*** Completion of a **2******-**year technical college program** **and** **3 years** working as an industrial electrician, **OR*** Completion of a **certified apprentice program** **and** **3 years** working as an industrial electrician, **OR*** **Ten (10) years** working as an industrial electrician.* Must be able to **climb ramps, ladders, and stairs**, work at **heights** and in **confined spaces**.### **Additional Information**Ameren’s selection process includes a series of interviews and may include candidate testing and/or an individual aptitude or skill-based assessment. Specific details will be provided to qualified candidates. #J-18808-Ljbffr
Generators, voltage regulator rheostats, exciters, buses & bus duct, transformers, circuit breakers, switches, power circuits, magnetic contactors, motors & motor starters, precipitators, batteries, plant lighting, conduit, wiring, boxes, supports, and hangers.* Work from schematics, drawings, and sketches.* Execute Workman’s Protection Assurance (WPA) and related procedures to ensure proper isolation and protection of equipment prior to work.* On energized equipment, ensure safety devices are in place and understood before work starts.* Obtain materials from storeroom; set up rigging and operate lifting equipment.* Erect and work from scaffolds.* Operate/use mobile equipment, shop equipment, portable power tools, hand tools, and test equipment.* Operate acetylene or other cutting/heating torches; check for explosive gases before use when necessary.* Prepare reports of work performed (including sketches if needed) and complete forms as required.* Work alone or in combination with **Electrical Repairman** or **Repairman (Mechanic)** classifications as assigned.* Perform similar and less skilled work as required.### ### **Safety & Accountability (Special Responsibilities)*** Carry out prescribed safety precautions and safeguards for personal and team protection.* Ensure safety of others when working on energized circuits; enforce safety instructions for anyone temporarily under your direction.* Perform work without disturbing other equipment; execute orders quickly and properly.* Maintain accuracy within required tolerances/specifications and exercise special care to avoid errors in repair/assembly.* Use tools, materials, and equipment properly; dispose of surplus/scrap materials appropriately.* Keep work areas clean and orderly to promote good work practices and safety.### **Cross-Functional Contacts**Work collaboratively with **Dispatchers, Meter & Relay personnel, Plant Operations, Maintenance, and Storeroom** supervision and personnel.### **Working Conditions*** Full range of temperatures from **very hot to sub-freezing**; sudden changes may occur.* Exposure to noise, dust, dirt, fumes, odors, drafts, and inclement weather.* Work in **cramped** and artificial light conditions is frequently necessary.### ### **Hazards*** Possible **electrical shocks, burns, or flashes** when working on/near energized equipment.* Hazards from possible failure of nearby equipment; danger from **falls** when working at elevation.* Usual hazards encountered in electrical construction/maintenance; occasional exposure to **noxious fumes** in confined spaces.### **Qualifications*** **High School Diploma or GED**
**AND either:*** Completion of a **2******-**year technical college program** **and** **3 years** working as an industrial electrician, **OR*** Completion of a **certified apprentice program** **and** **3 years** working as an industrial electrician, **OR*** **Ten (10) years** working as an industrial electrician.* Must be able to **climb ramps, ladders, and stairs**, work at **heights** and in **confined spaces**.### **Additional Information**Ameren’s selection process includes a series of interviews and may include candidate testing and/or an individual aptitude or skill-based assessment. Specific details will be provided to qualified candidates. #J-18808-Ljbffr