Teamind
This location is in Kaukauna, WI relocation, or daily commute required.
Location: Kaukauna, WI
Pay Range: Based on experience
Shift: 1st (6:00AM-4:30PM, Monday- Thursday, 10 hours)
Job Description Prepares substrate surfaces on fabricated metal piping, tanks, and other structures for coating by pressure blasting.
Summary of Major Responsibilities / Duties
Abrasive blasting of pipe, structural steel, and machined parts
Masking/taping and capping of pipe spools
Light maintenance of blast equipment
Fill out necessary paperwork for each piece, making sure it stays with the material as it goes from blast to paint
Upkeep of helmet, cape, and belts as they are used
Keep finished material organized in the prep area
Ability to be trained on a forklift, tug, overhead crane, and tractor
Ability to apply common sense understanding to carry out instructions furnished in written or oral form.
Cleaning and maintenance of personal protective equipment (PPE’s).
Performing other job-related duties as assigned.
Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor.
Minimum Knowledge, Skills and Abilities Required
High school diploma or general education degree (GED); or equivalent combination of education and/or up to one-month experience and/or training.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine paperwork.
Ability to deal with problems involving several concrete variables in standardized situations.
Other Requirements / Key Competencies
Effective problem solvers
Team player
Self‑Motivated
Attention to detail and can follow directions
Good verbal and written communication skills
Reliable
Mechanical ability
Physical agility
Pride in workmanship
Equipment Used
Hand tools (e.g., hammer, screwdriver)
Power tools (e.g., saws, welder, drill, grinders)
Vehicles (e.g., automobile, truck, tractor, lift)
Work Environment
Personal Protective Equipment Required: (all but the boots will be provided to you at the facility)
Steel Toe Work Boots
Hearing Protection
Safety Eyeglasses
Welding Coat
Respirator (if needed)
Gloves
Physical Demands, Working Conditions and Work Environment Indicate how often the following physical demands are required to perform the Essential job Responsibilities.
C
= Constantly,
F
= Frequently,
O
= Occasionally,
R
= Rarely
Standing (C)
Walking (C)
Sitting (R)
Lifting (F)
Carrying (F)
Pushing (C)
Pulling (C)
Climbing (O)
Balancing (O)
Stooping (O)
Kneeling (O)
Crouching (O)
Crawling (O)
Reaching (C)
Handling (C)
Little Physical Effort – 10lbs or less (C)
Grasping (C)
Light Work – up to 20lbs (C)
Feeling (O)
Medium Work – up to 50lbs (F)
Talking (C)
Heavy Work – up to 100lbs (O)
Hearing (C)
Very Heavy Work – above 100lbs (R)
Repetitive Motions (F)
Eye/Hand/Foot Coordination (C)
Extreme Cold (R)
Extreme Heat (O)
Temperature Changes (O)
Wet (O)
Humid (C)
Noise (C)
Vibration (F)
Hazards (C)
Atmospheric Conditions (C)
Safety All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.
#J-18808-Ljbffr
Location: Kaukauna, WI
Pay Range: Based on experience
Shift: 1st (6:00AM-4:30PM, Monday- Thursday, 10 hours)
Job Description Prepares substrate surfaces on fabricated metal piping, tanks, and other structures for coating by pressure blasting.
Summary of Major Responsibilities / Duties
Abrasive blasting of pipe, structural steel, and machined parts
Masking/taping and capping of pipe spools
Light maintenance of blast equipment
Fill out necessary paperwork for each piece, making sure it stays with the material as it goes from blast to paint
Upkeep of helmet, cape, and belts as they are used
Keep finished material organized in the prep area
Ability to be trained on a forklift, tug, overhead crane, and tractor
Ability to apply common sense understanding to carry out instructions furnished in written or oral form.
Cleaning and maintenance of personal protective equipment (PPE’s).
Performing other job-related duties as assigned.
Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor.
Minimum Knowledge, Skills and Abilities Required
High school diploma or general education degree (GED); or equivalent combination of education and/or up to one-month experience and/or training.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine paperwork.
Ability to deal with problems involving several concrete variables in standardized situations.
Other Requirements / Key Competencies
Effective problem solvers
Team player
Self‑Motivated
Attention to detail and can follow directions
Good verbal and written communication skills
Reliable
Mechanical ability
Physical agility
Pride in workmanship
Equipment Used
Hand tools (e.g., hammer, screwdriver)
Power tools (e.g., saws, welder, drill, grinders)
Vehicles (e.g., automobile, truck, tractor, lift)
Work Environment
Personal Protective Equipment Required: (all but the boots will be provided to you at the facility)
Steel Toe Work Boots
Hearing Protection
Safety Eyeglasses
Welding Coat
Respirator (if needed)
Gloves
Physical Demands, Working Conditions and Work Environment Indicate how often the following physical demands are required to perform the Essential job Responsibilities.
C
= Constantly,
F
= Frequently,
O
= Occasionally,
R
= Rarely
Standing (C)
Walking (C)
Sitting (R)
Lifting (F)
Carrying (F)
Pushing (C)
Pulling (C)
Climbing (O)
Balancing (O)
Stooping (O)
Kneeling (O)
Crouching (O)
Crawling (O)
Reaching (C)
Handling (C)
Little Physical Effort – 10lbs or less (C)
Grasping (C)
Light Work – up to 20lbs (C)
Feeling (O)
Medium Work – up to 50lbs (F)
Talking (C)
Heavy Work – up to 100lbs (O)
Hearing (C)
Very Heavy Work – above 100lbs (R)
Repetitive Motions (F)
Eye/Hand/Foot Coordination (C)
Extreme Cold (R)
Extreme Heat (O)
Temperature Changes (O)
Wet (O)
Humid (C)
Noise (C)
Vibration (F)
Hazards (C)
Atmospheric Conditions (C)
Safety All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.
#J-18808-Ljbffr