Continental
Job Description
Must be able to work 12-hour shifts, night and day.
Starting pay: $40.53.
The Multi-Craft Technician will safely perform all necessary duties and responsibilities relative to general maintenance and electrical repair of machines, equipment, Powerhouse, buildings and grounds, inclusive of but not limited to the following:
Troubleshooting, repair and preventative maintenance of machines
Constructing, installing, maintaining and removing all types of machinery and equipment used as a part of or a supplement to the plant operations.
Machine shop work, tooling, pipefitting, mechanical work, carpentry work, sheet metal work, and rigging. Multi-Craft Technicians are required to furnish their own basic hand tools.
Conduct inspections, preventative maintenance, repair, spill containment, clean up, and recordkeeping of environmental systems.
Performing basic structural welding tasks as needed.
Perform all necessary duties related to lubrication of machines, equipment, vehicles, and buildings on plant grounds. This includes, but is not limited to, changing or applying oils, greases or compounds; cleaning and changing oil filters; servicing air line lubrication and filtering equipment; cleaning both inside and outside of hydraulic units and oil reservoirs; taking oil samples; and repairing any minor miscellaneous leaks found on equipment while servicing.
Establish lubrication routes and know proper lubricant, amount, and attention required at each location.
Maintain a complete oiling and lubrication schedule as directed by supervision.
Responsible for all centrifuging and filtering operations that include moving, setting up, operating, and cleaning the centrifuge and filters.
Report to supervision any need for supplies and any unusual conditions that exist during the workday.
Drive company vehicles on plant property; handle required paperwork, keep work area clean and notify supervision of any problems encountered.
Assist in safety and fire prevention inspections as well as incipient fire control as necessary.
Perform all job duties in accordance with ContiTech’s environmental policy and applicable work instructions.
Monitor process and machine parameters during critical belt runs.
Troubleshoot machine malfunctions using PLC techniques and improve plant processes through PLC program modifications.
Troubleshoot AC and DC controls including changing fuses, coils, contacts, and relays.
Audit machine set points and process parameters for performance to specifications.
Verify calibration of process controllers and recorders.
Document machine PLC programs, troubleshooting activities and audit findings.
Install and repair electrical equipment including, but not limited to, switch gear, motors, starters, switches, instruments from wiring diagrams, sketches, and instruction manuals.
Install cable rack, cable, conduit, and pull wire.
Maintain inside and outside lighting including incandescent, fluorescent and mercury vapor fixtures.
Maintain motors and work safely on voltages up to 480.
Keep work area clean.
Work occasionally around heat, dirt, grease, oil, contact with water, etc.
Work at various heights.
Assume high responsibility for correct analysis and quality work; improper repair will result in safety concerns, waste of time and material.
Supply own basic hand tools.
Use standard electrical instruments such as an amp meter, voltmeter, and megger tester.
Read from blueprints, sketches, and/or specifications.
Qualifications
Minimum three (3) years industrial maintenance and electrical combined experience.
Must be able to read and write legibly.
Must be able to pass a written Multi-Craft Technician test.
Previous experience or schooling in industrial or major machine maintenance and/or electrical work.
Must be able to use all types of hand and power tools and supply own set of basic hand tools.
Must be able to climb and work in high places.
Must be able to work independently and in a group with little supervision.
Must be able to train others.
Must be able to work any shift and weekends when scheduled.
Must be willing to work on holidays.
Desired education / experience / skills:
Experience in industrial mechanical and electrical work.
Additional Information EEO / AA / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. As a federal contractor, Continental complies with government regulations, including affirmative action responsibilities. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to Careers@conti-na.com or contact US Recruiting at 248.393.5566. This phone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation. Please do not call about the status of your job application if you do not require accessibility assistance or an accommodation.
Ready to drive with Continental? Take the first step and fill in the online application.
#J-18808-Ljbffr
Starting pay: $40.53.
The Multi-Craft Technician will safely perform all necessary duties and responsibilities relative to general maintenance and electrical repair of machines, equipment, Powerhouse, buildings and grounds, inclusive of but not limited to the following:
Troubleshooting, repair and preventative maintenance of machines
Constructing, installing, maintaining and removing all types of machinery and equipment used as a part of or a supplement to the plant operations.
Machine shop work, tooling, pipefitting, mechanical work, carpentry work, sheet metal work, and rigging. Multi-Craft Technicians are required to furnish their own basic hand tools.
Conduct inspections, preventative maintenance, repair, spill containment, clean up, and recordkeeping of environmental systems.
Performing basic structural welding tasks as needed.
Perform all necessary duties related to lubrication of machines, equipment, vehicles, and buildings on plant grounds. This includes, but is not limited to, changing or applying oils, greases or compounds; cleaning and changing oil filters; servicing air line lubrication and filtering equipment; cleaning both inside and outside of hydraulic units and oil reservoirs; taking oil samples; and repairing any minor miscellaneous leaks found on equipment while servicing.
Establish lubrication routes and know proper lubricant, amount, and attention required at each location.
Maintain a complete oiling and lubrication schedule as directed by supervision.
Responsible for all centrifuging and filtering operations that include moving, setting up, operating, and cleaning the centrifuge and filters.
Report to supervision any need for supplies and any unusual conditions that exist during the workday.
Drive company vehicles on plant property; handle required paperwork, keep work area clean and notify supervision of any problems encountered.
Assist in safety and fire prevention inspections as well as incipient fire control as necessary.
Perform all job duties in accordance with ContiTech’s environmental policy and applicable work instructions.
Monitor process and machine parameters during critical belt runs.
Troubleshoot machine malfunctions using PLC techniques and improve plant processes through PLC program modifications.
Troubleshoot AC and DC controls including changing fuses, coils, contacts, and relays.
Audit machine set points and process parameters for performance to specifications.
Verify calibration of process controllers and recorders.
Document machine PLC programs, troubleshooting activities and audit findings.
Install and repair electrical equipment including, but not limited to, switch gear, motors, starters, switches, instruments from wiring diagrams, sketches, and instruction manuals.
Install cable rack, cable, conduit, and pull wire.
Maintain inside and outside lighting including incandescent, fluorescent and mercury vapor fixtures.
Maintain motors and work safely on voltages up to 480.
Keep work area clean.
Work occasionally around heat, dirt, grease, oil, contact with water, etc.
Work at various heights.
Assume high responsibility for correct analysis and quality work; improper repair will result in safety concerns, waste of time and material.
Supply own basic hand tools.
Use standard electrical instruments such as an amp meter, voltmeter, and megger tester.
Read from blueprints, sketches, and/or specifications.
Qualifications
Minimum three (3) years industrial maintenance and electrical combined experience.
Must be able to read and write legibly.
Must be able to pass a written Multi-Craft Technician test.
Previous experience or schooling in industrial or major machine maintenance and/or electrical work.
Must be able to use all types of hand and power tools and supply own set of basic hand tools.
Must be able to climb and work in high places.
Must be able to work independently and in a group with little supervision.
Must be able to train others.
Must be able to work any shift and weekends when scheduled.
Must be willing to work on holidays.
Desired education / experience / skills:
Experience in industrial mechanical and electrical work.
Additional Information EEO / AA / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. As a federal contractor, Continental complies with government regulations, including affirmative action responsibilities. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to Careers@conti-na.com or contact US Recruiting at 248.393.5566. This phone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation. Please do not call about the status of your job application if you do not require accessibility assistance or an accommodation.
Ready to drive with Continental? Take the first step and fill in the online application.
#J-18808-Ljbffr