TTM Technologies
Production Operator - Final Finish - 1st Shift
TTM Technologies, Stafford, Connecticut, us, 06075
About TTM
TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time‑critical, one‑stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market.
Additional information can be found at www.ttm.com.
Scope
As a Plating Operator, you will work in a fun, team‑oriented environment, operating production equipment and performing a variety of tasks. Your strong attention to detail and safety orientation would play a key role in producing printed circuit boards. We offer training for those that have never worked on printed circuit boards before.
The work schedule for this position will follow a rotating schedule of Monday‑Friday 7:00am – 3:30pm and Monday‑Thursday * 6:30am – 4:00pm. *Friday of this week, work may be scheduled based on business needs.
Duties and Responsibilities
Monitor chemical inventory, maintain a safe work environment, monitor production, and maintain quality of the product.
Communicate movement of critical and non‑critical jobs to the next stages.
Identify and record any quality problems, initiate, recommend, and provide solutions, verify the implementation of solutions, and control further processing delivery of nonconforming products until the deficiency has been corrected.
Facilitate and attend meetings, communicate regularly with managers and supervisors, maintain a clean, safe work environment, and communicate to supervisor safety hazards and issues.
Generate, accumulate, and handle hazardous wastes generated in daily operations, as directed by the Environmental, Health, and Safety Manager.
Report all accidents, near misses and safety concerns. Perform job duties utilizing required and appropriate personal protective equipment (PPE). Full participation in safety training and ability to understand and follow directions identified in Job Safety Analysis (JSA), PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts.
Note The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.
Essential Knowledge and Skills
Good English communication and mathematical skills.
Good reading vision, color discrimination, depth perception, and the ability to speak clearly.
Ability to perform routine tasks.
Must be a team player and must work well with others.
Must adapt to a changing environment.
Ability to work up to 10 hours a day and is flexible to work overtime when needed.
Able to lift up to 40 pounds, bending, leaning, sitting and/or standing for entire shift.
Flexible and able to cross‑train to work in any position throughout both buildings.
Ability to safely work or come in contact with chemical, physical (noise, etc) or biological agents.
Regular attendance is an essential job function of this position.
Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident.
Education
High school diploma or GED is required.
Preferred Experience
Prior experience working in a manufacturing environment a plus.
Prior plating experience a plus.
Compensation and Benefits TTM offers a variety of health and well‑being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire.
Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that may be hired in New York, California and Colorado. For California‑based roles, compensation ranges are based upon specific physical locations.
Export Statement Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only U.S. Citizens and U.S. Permanent Residents; b) recognition of foreign person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
#J-18808-Ljbffr
Additional information can be found at www.ttm.com.
Scope
As a Plating Operator, you will work in a fun, team‑oriented environment, operating production equipment and performing a variety of tasks. Your strong attention to detail and safety orientation would play a key role in producing printed circuit boards. We offer training for those that have never worked on printed circuit boards before.
The work schedule for this position will follow a rotating schedule of Monday‑Friday 7:00am – 3:30pm and Monday‑Thursday * 6:30am – 4:00pm. *Friday of this week, work may be scheduled based on business needs.
Duties and Responsibilities
Monitor chemical inventory, maintain a safe work environment, monitor production, and maintain quality of the product.
Communicate movement of critical and non‑critical jobs to the next stages.
Identify and record any quality problems, initiate, recommend, and provide solutions, verify the implementation of solutions, and control further processing delivery of nonconforming products until the deficiency has been corrected.
Facilitate and attend meetings, communicate regularly with managers and supervisors, maintain a clean, safe work environment, and communicate to supervisor safety hazards and issues.
Generate, accumulate, and handle hazardous wastes generated in daily operations, as directed by the Environmental, Health, and Safety Manager.
Report all accidents, near misses and safety concerns. Perform job duties utilizing required and appropriate personal protective equipment (PPE). Full participation in safety training and ability to understand and follow directions identified in Job Safety Analysis (JSA), PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts.
Note The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.
Essential Knowledge and Skills
Good English communication and mathematical skills.
Good reading vision, color discrimination, depth perception, and the ability to speak clearly.
Ability to perform routine tasks.
Must be a team player and must work well with others.
Must adapt to a changing environment.
Ability to work up to 10 hours a day and is flexible to work overtime when needed.
Able to lift up to 40 pounds, bending, leaning, sitting and/or standing for entire shift.
Flexible and able to cross‑train to work in any position throughout both buildings.
Ability to safely work or come in contact with chemical, physical (noise, etc) or biological agents.
Regular attendance is an essential job function of this position.
Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident.
Education
High school diploma or GED is required.
Preferred Experience
Prior experience working in a manufacturing environment a plus.
Prior plating experience a plus.
Compensation and Benefits TTM offers a variety of health and well‑being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire.
Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that may be hired in New York, California and Colorado. For California‑based roles, compensation ranges are based upon specific physical locations.
Export Statement Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only U.S. Citizens and U.S. Permanent Residents; b) recognition of foreign person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
#J-18808-Ljbffr