TRIGO ADR Americas
Aerospace Quality Engineer- Level 1
TRIGO ADR Americas, St. Petersburg, Florida, United States, 33739
Overview
The Quality Engineer will evaluate and/or appraise supplier's manufacturing capabilities to baseline their processes for conformance to documented commodity checklists and QMS special processes. Establishes part quality evaluation plans from materials requests through material receipt (full life-cycle). Provides resolution and disposition of non-conforming materials to ensure adequate corrective action. Responsibilities
The Quality Engineer is highly supplier-focused, requiring excellent interpersonal and communication skills (oral and written) to manage supplier quality assurance responsibilities and ensure compliance across and at all levels of the organization on major programs from design through production stages. Evaluate manufacturing functions and processes to ensure Quality Standards are in place. Evaluate inspection and testing processes, mechanisms and equipment; perform statistical analysis to assess the cost of and determine responsibility for products or materials that do not meet required standards and specifications. Participate in QMS audits for process deficiency and correction. Ensure corrective measures meet acceptable reliability standards and that documentation is compliant with requirements. Interact in design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality. Involved in lean and six-sigma quality engineering methodologies. Hands-on knowledge and experience of mechanical (machine shop) components, assembly, subsystem and system level concepts. Strong emphasis on RCCA and CAPA experience. Understanding of FMEA and process improvements and standardization of processes. Required Skills
Minimum 3-5 years with LEAN Manufacturing application experience. 3-5 years' experience in areas of Quality Engineering such as FMEA, SPC, RCCA, Process Control, Product Evaluation and Auditing. 2-3 years' working knowledge and experience with ISO9100 and AS9100 QMS processes, especially in Production and Quality Engineering. 2-3 years' working knowledge and experience with Aircraft Parts and Material Conformity Inspections. 3-5 years FAI experience with AS9102 (FAI) Protocol. 3-5 years' knowledge and experience with inspection methods, techniques and protocols. 3-5 years' experience in understanding and the application of Engineering Mechanical Processes, Standard Drawings Conventions, Interpreting Drawing Specifications (ANSI 14.5) and GD&T. 3-5 years' experience in understanding and the application of Electronic Assembly Process and Inspection, Standard Conventions (IPC-610, J-Std-1000), Interpreting Schematic Diagrams and Specifications. Airframe experience required. AVMS electronic experience required. Strong English verbal and written communication skills. Reliable transportation; must have current/active driver's license. Valid driver's license and auto insurance required. US citizenship required. Some roles may restrict hiring to US Citizens on government contracts. Required Education (including certifications)
In lieu of a degree, 6+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment. High School or GED. Preferred Education and Skills (including certifications)
Bachelor's degree preferred from an accredited college in a technical discipline (e.g., Industrial Engineering, Mechanical Engineering, Quality Management). Proficient with Microsoft Office Products (Excel, Outlook, PowerPoint, Word). Compatible certifications or related college courses. Team-minded, communicative, proactive, stress-resistant, assertive. Strong interpersonal communication and problem-solving skills. Working Conditions
Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, working with the Quality management team, SMS team, and external customers. Other Factors: Typical hours are Monday – Friday, 8:00 a.m. – 5:00 p.m. Occasional extended hours and weekend overtime may be required. The employee may drive long distances to suppliers as needed. May lift/move up to 20 pounds. Vision requirements include close, distance, color, peripheral, and focus. Benefits
TRIGO AERO GROUP provides a 2% vacation bonus (2% of salary, excluding reimbursable expenses) after one year of continuous employment with minimum 1,400 hours worked and hours reset annually. 401k with employer match – available after 90 days of employment. Full Time Benefit Package Includes: Comprehensive Medical, Dental, Vision, Life, Critical Illness Insurance, FSA Health and Short-Term Disability. Pay Range
$35 to $43 hourly. Compensation is a guideline and may reflect scope and responsibilities, candidate experience, education, skills, internal equity, market and business considerations. Company Overview
TRIGO ADR Americas is a leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. We offer an embedded on-site presence to drive systemic changes that enhance supplier quality and delivery performance. We work to build collaboration across the supply chain to improve results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts. All qualified candidates will receive consideration. Selection will be made without regard to race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying disability, age, sexual orientation, gender identity, genetic information, or membership in a protected group.
#J-18808-Ljbffr
The Quality Engineer will evaluate and/or appraise supplier's manufacturing capabilities to baseline their processes for conformance to documented commodity checklists and QMS special processes. Establishes part quality evaluation plans from materials requests through material receipt (full life-cycle). Provides resolution and disposition of non-conforming materials to ensure adequate corrective action. Responsibilities
The Quality Engineer is highly supplier-focused, requiring excellent interpersonal and communication skills (oral and written) to manage supplier quality assurance responsibilities and ensure compliance across and at all levels of the organization on major programs from design through production stages. Evaluate manufacturing functions and processes to ensure Quality Standards are in place. Evaluate inspection and testing processes, mechanisms and equipment; perform statistical analysis to assess the cost of and determine responsibility for products or materials that do not meet required standards and specifications. Participate in QMS audits for process deficiency and correction. Ensure corrective measures meet acceptable reliability standards and that documentation is compliant with requirements. Interact in design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality. Involved in lean and six-sigma quality engineering methodologies. Hands-on knowledge and experience of mechanical (machine shop) components, assembly, subsystem and system level concepts. Strong emphasis on RCCA and CAPA experience. Understanding of FMEA and process improvements and standardization of processes. Required Skills
Minimum 3-5 years with LEAN Manufacturing application experience. 3-5 years' experience in areas of Quality Engineering such as FMEA, SPC, RCCA, Process Control, Product Evaluation and Auditing. 2-3 years' working knowledge and experience with ISO9100 and AS9100 QMS processes, especially in Production and Quality Engineering. 2-3 years' working knowledge and experience with Aircraft Parts and Material Conformity Inspections. 3-5 years FAI experience with AS9102 (FAI) Protocol. 3-5 years' knowledge and experience with inspection methods, techniques and protocols. 3-5 years' experience in understanding and the application of Engineering Mechanical Processes, Standard Drawings Conventions, Interpreting Drawing Specifications (ANSI 14.5) and GD&T. 3-5 years' experience in understanding and the application of Electronic Assembly Process and Inspection, Standard Conventions (IPC-610, J-Std-1000), Interpreting Schematic Diagrams and Specifications. Airframe experience required. AVMS electronic experience required. Strong English verbal and written communication skills. Reliable transportation; must have current/active driver's license. Valid driver's license and auto insurance required. US citizenship required. Some roles may restrict hiring to US Citizens on government contracts. Required Education (including certifications)
In lieu of a degree, 6+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment. High School or GED. Preferred Education and Skills (including certifications)
Bachelor's degree preferred from an accredited college in a technical discipline (e.g., Industrial Engineering, Mechanical Engineering, Quality Management). Proficient with Microsoft Office Products (Excel, Outlook, PowerPoint, Word). Compatible certifications or related college courses. Team-minded, communicative, proactive, stress-resistant, assertive. Strong interpersonal communication and problem-solving skills. Working Conditions
Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, working with the Quality management team, SMS team, and external customers. Other Factors: Typical hours are Monday – Friday, 8:00 a.m. – 5:00 p.m. Occasional extended hours and weekend overtime may be required. The employee may drive long distances to suppliers as needed. May lift/move up to 20 pounds. Vision requirements include close, distance, color, peripheral, and focus. Benefits
TRIGO AERO GROUP provides a 2% vacation bonus (2% of salary, excluding reimbursable expenses) after one year of continuous employment with minimum 1,400 hours worked and hours reset annually. 401k with employer match – available after 90 days of employment. Full Time Benefit Package Includes: Comprehensive Medical, Dental, Vision, Life, Critical Illness Insurance, FSA Health and Short-Term Disability. Pay Range
$35 to $43 hourly. Compensation is a guideline and may reflect scope and responsibilities, candidate experience, education, skills, internal equity, market and business considerations. Company Overview
TRIGO ADR Americas is a leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. We offer an embedded on-site presence to drive systemic changes that enhance supplier quality and delivery performance. We work to build collaboration across the supply chain to improve results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts. All qualified candidates will receive consideration. Selection will be made without regard to race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying disability, age, sexual orientation, gender identity, genetic information, or membership in a protected group.
#J-18808-Ljbffr