Energy Transfer
Summary
This position will report to the Sr Director – Engineer as a part of the Gulf Coast Ops Engineering team within the Terminal Services organization. Primary focus is to provide Process Engineering and Optimization support to the Nederland and Spindletop Facilities.
Facilities and Assets Supported
Nederland Export Terminal
Ethane Chilling and Export Capacity of 360k+ BBL/d
Propane Chilling and Export Capacity of 500k+ BBL/d
Butane Chilling and Export Capacity of 200k+ BBL/d
Product Storage of 3MM+ BBLs
Spindletop Storage Facility
11MM+ BBLs Storage Capacity across Ethylene and Helium
Ethylene delivery capacity of 600k+ lbs/hr
Additional assets supported by the Gulf Coast Ops Engineering team include:
8 NGL Fractionation Plants with a combined capacity over 1.15 million BBL/d
Ongoing Frac 9 Expansion providing additional 165k BBL/d capacity
63+ million barrels of Salt Dome Storage capacity
Ongoing Expansion providing additional 6MM BBLs Storage Capacity
Essential Duties and Responsibilities
Provide Process Engineering support for the Nederland Export Terminal and Spindletop Storage Facility located near Nederland, TX. Core Functions are as follows:
Process Optimization:
Revenue Generation – Capacity Increases, Product Uplift, Increased Runtime
Expense Reduction – Reduce Utilities, Maintenance, Consumables
Process Troubleshooting:
Operations Support – Primary Resources for Ops
RCFA’s – Lead Investigations, Develop & Implement Solutions, Lessons Learned
Compliance Support:
PSM – PHA Prep & Engineering SME, addressing Action Items, PSI Upkeep
Environmental – Quantifying & Supporting Emissions Compliance
CapMaint Project Execution:
Annual Project Budget Cycle Support – Scoping & Estimating Projects
Project Execution – Assign PM’s and Executive Projects
CapGrowth Project Growth:
Pre-FID – Concept Reviews, Lessons Learned, Potential Optimizations
Post-FID – Design Reviews, PHA, Commissioning & Start-up Support
Maintain facility process simulations and work with other process engineers to develop process solutions while following engineering standards, code compliance, company and safety standards, and good engineering practices.
Proactively seek opportunities to broaden and deepen process engineering and project management knowledge base and proficiencies.
Requirements
A Bachelor’s degree in an engineering discipline (preferably Chemical, Mechanical, or Natural Gas) and 3-6 years of relevant work experience
Highly motivated with a consistent drive for growth and development
Solution oriented mindset and ability to apply Critical Thinking skills
Organized and able to effectively prioritize tasks
Strong verbal and written communications skills
Demonstrated ability to influence without direct authority
Team player with a willingness to assist outside of own discipline
Proficiency utilizing Engineering Process Simulation Programs (ProMax, Hysys, etc.)
Proficiency utilizing Microsoft Office Suite applications
Preferred Qualifications
Experience with NGL/LPG facilities
Knowledge of Treating and Dehydration fundamentals, operation and maintenance
Knowledge of Refrigeration fundamentals, operation and maintenance
Knowledge of Refrigerated Storage fundamentals, operation and maintenance
Knowledge of Boil-Off Gas fundamentals, operation and maintenance
Experience with PSM facilities and PHA/LOPA processes
Operations, Maintenance or Technical Operations experience in the Midstream industry
Master’s Degree in a relevant field (Engineering, Business Administration, Finance, etc)
Professional Engineer (PE) License
Project Management Professional (PMP) Certification
Working Conditions
Required to live within 45 minutes of the reporting location.
Normal office working conditions and field work.
Must be able to remain in a stationary position 50% of the time due to prolonged periods of sitting or standing.
Occasional overnight travel may be required.
Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment.
Additional Information
Seniority level: Mid‑Senior level
Employment type: Full‑time
Job function: Management and Manufacturing
Industry: Oil and Gas
Location: Port Arthur, TX
Salary: $125,600.00 – $188,400.00
Application posted 12 hours ago
#J-18808-Ljbffr
Facilities and Assets Supported
Nederland Export Terminal
Ethane Chilling and Export Capacity of 360k+ BBL/d
Propane Chilling and Export Capacity of 500k+ BBL/d
Butane Chilling and Export Capacity of 200k+ BBL/d
Product Storage of 3MM+ BBLs
Spindletop Storage Facility
11MM+ BBLs Storage Capacity across Ethylene and Helium
Ethylene delivery capacity of 600k+ lbs/hr
Additional assets supported by the Gulf Coast Ops Engineering team include:
8 NGL Fractionation Plants with a combined capacity over 1.15 million BBL/d
Ongoing Frac 9 Expansion providing additional 165k BBL/d capacity
63+ million barrels of Salt Dome Storage capacity
Ongoing Expansion providing additional 6MM BBLs Storage Capacity
Essential Duties and Responsibilities
Provide Process Engineering support for the Nederland Export Terminal and Spindletop Storage Facility located near Nederland, TX. Core Functions are as follows:
Process Optimization:
Revenue Generation – Capacity Increases, Product Uplift, Increased Runtime
Expense Reduction – Reduce Utilities, Maintenance, Consumables
Process Troubleshooting:
Operations Support – Primary Resources for Ops
RCFA’s – Lead Investigations, Develop & Implement Solutions, Lessons Learned
Compliance Support:
PSM – PHA Prep & Engineering SME, addressing Action Items, PSI Upkeep
Environmental – Quantifying & Supporting Emissions Compliance
CapMaint Project Execution:
Annual Project Budget Cycle Support – Scoping & Estimating Projects
Project Execution – Assign PM’s and Executive Projects
CapGrowth Project Growth:
Pre-FID – Concept Reviews, Lessons Learned, Potential Optimizations
Post-FID – Design Reviews, PHA, Commissioning & Start-up Support
Maintain facility process simulations and work with other process engineers to develop process solutions while following engineering standards, code compliance, company and safety standards, and good engineering practices.
Proactively seek opportunities to broaden and deepen process engineering and project management knowledge base and proficiencies.
Requirements
A Bachelor’s degree in an engineering discipline (preferably Chemical, Mechanical, or Natural Gas) and 3-6 years of relevant work experience
Highly motivated with a consistent drive for growth and development
Solution oriented mindset and ability to apply Critical Thinking skills
Organized and able to effectively prioritize tasks
Strong verbal and written communications skills
Demonstrated ability to influence without direct authority
Team player with a willingness to assist outside of own discipline
Proficiency utilizing Engineering Process Simulation Programs (ProMax, Hysys, etc.)
Proficiency utilizing Microsoft Office Suite applications
Preferred Qualifications
Experience with NGL/LPG facilities
Knowledge of Treating and Dehydration fundamentals, operation and maintenance
Knowledge of Refrigeration fundamentals, operation and maintenance
Knowledge of Refrigerated Storage fundamentals, operation and maintenance
Knowledge of Boil-Off Gas fundamentals, operation and maintenance
Experience with PSM facilities and PHA/LOPA processes
Operations, Maintenance or Technical Operations experience in the Midstream industry
Master’s Degree in a relevant field (Engineering, Business Administration, Finance, etc)
Professional Engineer (PE) License
Project Management Professional (PMP) Certification
Working Conditions
Required to live within 45 minutes of the reporting location.
Normal office working conditions and field work.
Must be able to remain in a stationary position 50% of the time due to prolonged periods of sitting or standing.
Occasional overnight travel may be required.
Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment.
Additional Information
Seniority level: Mid‑Senior level
Employment type: Full‑time
Job function: Management and Manufacturing
Industry: Oil and Gas
Location: Port Arthur, TX
Salary: $125,600.00 – $188,400.00
Application posted 12 hours ago
#J-18808-Ljbffr